Full programme
YUCOMAT 2017
Herceg Novi, Montenegro, September 4–8, 2017
YUCOMAT 2017
Nineteenth Annual Conference
YUCOMAT 2017
Herceg Novi, Montenegro, September 4–8, 2017
YUCOMAT 2017
Nineteenth Annual Conference
YUCOMAT 2017
Herceg Novi, Montenegro, September 4–8, 2017
YUCOMAT 2017
Nineteenth Annual Conference
YUCOMAT 2017
Herceg Novi, Montenegro, September 4–8, 2017
YUCOMAT 2017
Nineteenth Annual Conference
YUCOMAT 2017
Herceg Novi, Montenegro, September 4–8, 2017
YUCOMAT 2017
Nineteenth Annual Conference
YUCOMAT 2017
Herceg Novi, Montenegro, September 4–8, 2017
YUCOMAT 2017
Nineteenth Annual Conference
YUCOMAT 2017
Herceg Novi, Montenegro, September 4–8, 2017
YUCOMAT 2017
Nineteenth Annual Conference

Download the Final Programme (PDF)

Monday, September 4, 2017


OPENING CEREMONY

Main Conference Hall

0900-0930

Welcome Speech
Dragan Uskoković, President of MRS-Serbia, Belgrade, Serbia

Welcome Address
Robert Sinclair, Chair of International Advisory Board


Presentation of YUCOMAT 2016 Awards
Slobodan Milonjić, Vice President of MRS-Serbia

 

0930-1000
MRS-Serbia 2017 Award for a Lasting and Outstanding Contribution to Materials Science and Engineering
Atomistic Phenomena in Engineering Materials
Velimir R. Radmilović
Serbian Academy of Sciences and Arts, Knez Mihailova 35, 11000, Belgrade, Serbia, and Nanotechnology and Functional Materials Center, Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11120 Belgrade, Serbia


Break: 1000-1030

Main Conference Hall

First Plenary Session: 10.30-13.00

Chairmen: Markus Antonietti and C. Jeffrey Brinker

1030-1100
Global opportunities in nanoscience and nanotechnology
Paul S. Weiss
California NanoSystems Institute and Departments of Chemistry & Biochemistry and Materials Science & Engineering, UCLA, Los Angeles, CA 90095, USA

1100-1130
Analysis of next generation quantum materials
David C. Bell1, Felix VonCube2
1Harvard John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, MA, United States, 2Hitachi High-Technologies Europe GmbH, Krefeld, Germany

1130-1200
Carbon nitrides as active semiconductors and supports for Artificial Photosynthesis and (Photo)Catalysis
Markus Antonietti
Max Planck Institute of Colloids and Interfaces, Research Campus Golm, D-14424 Potsdam, Germany

1200-1230
Efficient CRISPR delivery via plasmid DNA (or ribonucleoprotein, RNP) packaged in mesoporous silica nanoparticles through cationic vesicle fusion

Kim Butler1, Rita Serda2, Achraf Noureddine2, Ayse Muniz3, Darryl Sasaki1, Oscar Negrete1, and C. Jeffrey Brinker1,2
1Sandia National Laboratories, 2University of New Mexico Center for Microengineered Materials and the Department of Chemical and Biological Engineerining, 3University of Michigan Biointerfaces Institute, USA

1230-1300
“Anything you can do I can do better” What can be done with Sonochemistry?
Aharon Gedanken
Department of Chemistry, Bar-Ilan University, Ramat-Gan, Israel

1300-1330 Photo session

Break: 1300-1500

 
Second plenary session

Main Conference Hall

Session I: 15.00-16.30

Chairpersons: Eva Olsson and Robert Sinclair

1500-1530
Assessing material reactions in the environmental transmission electron microscope (TEM)
Robert Sinclair1, S. C. Lee2, and A. L. Koh3
1Dept. of Materials Science & Engineering, Stanford University, Stanford, U.S.A. 2Dept. of Materials Science & Engineering, Stanford University, Stanford, U.S.A., 3Stanford Nano Shared Facilities, Stanford University, Stanford, U.S.A.

1530-1600
In-situ microscopy with atomic resolution at atmospheric pressure
Xiaoqing Pan
Department of Chemical Engineering and Materials Science, Department of Physics and Astronomy, University of California - Irvine, Irvine, California 92697, USA

1600-1630
In situ advanced electron microscopy of nanostructured materials for energy and quantum devices
Eva Olsson
Department of Physics, Chalmers University of Technology, Sweden

1630-1700 Break

Session II: 17.00-19.00

Chairmen: Knut W. Urban and Rafal E. Dunin-Borkowski

1700-1730
Atomic resolution imaging of materials in the chromatic and spherical aberration corrected transmission electron microscope
Knut W. Urban and Lei Jin
Peter Gruenberg Institute, Research Center Juelich, Germany

1730-1800
Model-based reconstruction of magnetisation distributions in nanostructures from electron-optical phase images
Jan Caron1, Patrick Diehle1, Andras Kovács1, Jörn Ungermann2, Rafal E. Dunin-Borkowski1
1Ernst Ruska-Centre for Microscopy and Spectroscopy with Electrons, Forschungszentrum Jülich, 52425 Jülich, Germany, 2Institute for Energy and Climate Research, Forschungszentrum Jülich, 52425 Jülich, Germany

1800-1830
Atomic resolution TEM characterization of GaSb/GaInAs and GaSb/GaInP bond interfaces for high-efficiency solar cells
Andras Kovács1, Felix Predan2, Jens Ohlmann2, David Lackner2, Frank Dimroth2, Rafal E. Dunin-Borkowski1, Wolfgang Jäger3
1Ernst Ruska-Centre for Microscopy and Spectroscopy with Electrons, Forschungszentrum Jülich, 52425 Jülich, Germany, 2Fraunhofer Institute for Solar Energy Systems ISE, Freiburg, Germany, 3Institute for Materials Science, Christian-Albrechts-University of Kiel, 24143 Kiel, Germany

1830-1900
Sub-30 meV energy resolution HR-EELS and novel HR-STEM techniques for materials science in the latest generation of Thermo Scientific Themis Z
Dominique Delille
Materials & Structural Analysis (formerly FEI), Thermo Fisher Scientific, Achtseweg Noord 5, P.O. Box 80066, 5600KA Eindhoven, The Netherlands

Cocktail Party: 1930-2130

 

Tuesday, September 5, 2017


Third plenary session

Main Conference Hall

Session I: 09.00-11.00

Chairmen: Richard W. Siegel and Vladimir Torchilin

0900-0930
Nanoparticles as delivery vehicles: Enabling nanocomposites and healthcare
Richard W. Siegel
Materials Science and Engineering Department, Rensselaer Polytechnic Institute, Troy, New York 12180, USA

0930-1000
Multifunctional nanocarriers for drug delivery in cancer therapy
Vladimir Torchilin
Center for Pharmaceutical Biotechnology and Nanomedicine, Northeastern University, Boston, MA 02115, USA

1000-1030
Targeted nanomedicines for cancer, diabetes and cardiovascular diseases: why the size matters?
Hélder A. Santos
Division of Pharmaceutical Chemistry and Technology, Drug Research Program, Faculty of Pharmacy, and Helsinki Institute of Life Science, HiLIFE, University of Helsinki FI-00014, Helsinki, Finland

1030-1100
Bioinspired biomaterials for hard tissue repair and regeneration
Anne George
Brodie Tooth Development Genetics & Regenerative Medicine Research Laboratory, Department of Oral Biology, University of Illinois at Chicago, Chicago, Illinois 60612, USA

1100-1130 Break

Session II: 11.30-13.00

Chairmen: Horst Hahn and Hamish L. Fraser

1130-1200
Design of materials properties by microstructure and external fields
Horst Hahn
Institute of Nanotechnology, Karlsruhe Institute of Technology, Germany

1200-1230
Sucking the heat out of ceramic processing
Clive A. Randall
The Pennsylvania State University, USA

1230-1300
Materials characterization and integrated computational materials engineering: providing solutions for near-net shape manufacturing
Hamish L Fraser1, Brian Welk1 and Victor Samarov2
1Center for the Accelerated Maturation of Materials, The Ohio State University, Columbus, OH, 2Synertech-PM, Garden Grove, CA, USA

1300-1500 Break

 

Break: 1300-1500

 
Fourth Plenary Session

Main Conference Hall

Session I: 15.00-17.00

Chairpersons: Martha R McCartney and David J. Smith

1500-1530
From low dose In-line electron holography to atomic resolution tomography
Fu-Rong Chen1, D. Van Dyck2, C. Kisielowski3
1Dept. of Engineering and System Science, National Tsing Hua University, Hsin Chu, Taiwan, 2EMAT, Department of Physics, University of Antwerp, 2020 Antwerpen, Belgium, 3Lawrence Berkeley National Laboratory, The Molecular Foundry and Joint Center for Artificial Photosynthesis, One Cyclotron Road, Berkeley California 94720 USA

1530-1600
Electron holography of nanoscale electric and magnetic fields
Martha R McCartney, David J. Smith
Arizona State University, USA

1600-1630
Complex heterostructures investigated using aberration-corrected STEM
David J. Smith and Martha R. McCartney
Department of Physics, Arizona State University, Tempe, Arizona 85287-1504, USA

1630-1700
Pushing the limits of electron energy loss spectroscopy for materials characterization: from phonons to core losses in real and momentum spaces
Quentin M. Ramasse1, Demie M. Kepaptsoglou1, Fredrik S. Hage1, F. Azough2, R. Freer2
1SuperSTEM Laboratory, Daresbury, U.K., 2School of Materials, University of Manchester, U.K.

1700-1730 Break

Session II: 17.30-19.30

Chairmen: Laurence D. Marks and Ehrenfried Zschech

1730-1800
Corrosion at the nanoscale: the role of chloride
Laurence D. Marks
Department of Materials Science and Engineering, Northwestern University, Evanston, IL 60208, USA

1800-1830
Sub-100nm in-situ X-ray tomography - Applications in materials science and engineering
Ehrenfried Zschech, Jürgen Gluch, Kristina Kutukova
Fraunhofer IKTS Dresden, Germany

1830-1900
Atomic level characterization of novel hardening mechanisms in high-Mn-steels
Joachim Mayer1,2, Maryam Beigmohamadi2, Marta Lipinska-Chwalek1,2 and James E.Wittig3
1Central Facility for Electron Microscopy, RWTH Aachen University, Aachen, Germany, 2Ernst Ruska Centre, Forschungszentrum Jülich, Germany, 3Interdisciplinary Materials Science, Vanderbilt University, Nashville TN, 37235 USA

1900-1930
Solid-solid interface reconstruction at nominally incoherent interfaces: Ni-Al2O3 and Ni-YSZ

Hadar Nahor, Hila Meltzman, and Wayne D. Kaplan
Department of Materials Science and Engineering, Technion – Israel Institute of Technology, Technion City, Haifa 32000, Israel

 

Poster Session I: 2000-2200

SYMPOSIUM A: Advanced methods in synthesis and processing of materials

P.S.A.1.Preparation and properties of photocatalyst in TiO2-ZnO system
Anita Letlena, Jānis Grabis, Aija Krūmiņa
Riga Technical University, Faculty of Material Science and Applied Chemistry, Institute of Inorganic Chemistry, Latvia

P.S.A.2. Modified TiO2 thin films prepared by spray pyrolysis deposition and their photocatalytic activity
Laura Rozenberga-Voska, Jānis Grabis
Institute of Inorganic Chemistry, Faculty of Material Science and Applied Chemistry, Riga Technical University, Latvia

P.S.A.3. Nanobanksia - novel hybrid inorganic/organic nanomaterial
Aleš Mrzel, Damjan Vengust, Mojca Vilfan
Jozef Stefan Institute, Jamova 39, 1000 Ljubljana, Slovenia

P.S.A.4. Leaching of trace elements from packaging material into canned meat products
Branislav Stojanović1, Ljubica Radović2, Tatjana Šolević Knudsen3, Branimir Jovančićević4, Tanja Petrović5, Steva Lević5 and Vesna Antić5
1Ministry of Defence-Republic of Serbia, Belgrade, Serbia, 2Military Technical Institute, Belgrade, Serbia, 3Institute of Chemistry, Technology and Metallurgy, Belgrade, Serbia, 4University of Belgrade-Faculty of Chemistry, Belgrade, Serbia, 5University of Belgrade-Faculty of Agriculture, Zemun, Serbia

P.S.A.5. Characterization of pressureless sintered MgO-Al2O3-SiO2-TeO2 system
Nina Obradović1, Nataša Đorđević2, Darko Kosanović1, Suzana Filipović1, Martin Kachlik3, Karel Maca3, Dragan Olćan4, Antonije Đorđević4,5, Vladimir Pavlović1
1Institute of Technical Sciences of SASA, Knez Mihailova 35/IV, 11000 Belgrade, Serbia, 2Institute for Technology of Nuclear and Other Mineral Raw Materials, Bulevar Franse d’Eperea 86, 11000 Belgrade, Serbia, 3CEITEC BUT, Brno University of Technology, 61600 Brno, Czech Republic, 4School of Electrical Engineering, University of Belgrade, Bulevar kralja Aleksandra 73, 11000 Belgrade, Serbia, 5Serbian Academy of Sciences and Arts, Knez Mihailova 35, 11000 Belgrade, Serbia

P.S.A.6. Temperature responsive hydrogels based on ethylene glycol propylene glycol “block” units with VPTT close to human body temperature
Edin Suljovrujić, Maja Mićić, Zorana Rogić Miladinović, Dejan Miličević
Vinča Institute of Nuclear Sciences, University of Belgrade, Belgrade, Serbia

P.S.A.7. Composition of red mud and/or metakaolin-based modified geopolymers
Mira Vukčević1, Ivana Bošković1, Snežana Nenadović2, Miljana Mirković2, Bojan Čalija3, Vladimir Pavlović4, and Ljiljana Kljajević2
1Faculty of Metallurgy and Technology, University of Montenegro, 2Laboratory for Materials Sciences, Institute of Nuclear Sciences Vinča, University of Belgrade, Serbia, 3Department of Pharmaceutical Technology, Faculty of Pharmacy, University of Belgrade, Serbia, 4Institute of Technical Sciences of the Serbian Academy of Sciences and Arts, University of Belgrade, Serbia

P.S.A.8. Fabrication and characterization of Al-5 wt.% Si matrix composites reinforced with various boride particles
Duygu Ağaoğulları, Sıddıka Mertdinç, Emre Tekoğlu, M. Lütfi Öveçoğlu
Istanbul Technical University, Chemical and Metallurgical Engineering Faculty, Metallurgical and Materials Engineering Department, Particulate Materials Laboratories (PML), 34469 Maslak, Istanbul, Turkey

P.S.A.9.  Combustion synthesis of yttrium aluminum perovskites doped by rare earth ions
Daniel Michalik1, Krzysztof Strzech1, Radoslaw Lisiecki2, Tomasz Pawlik1, Malgorzata Sopicka Lizer1
1
Silesian University of Technology, Department of Materials Science, Krasinskiego 8, 40-019 Katowice, Poland, 2Institute of Low Temperature and Structure Research, Okolna 2, 50-422 Wroclaw, Poland

P.S.A.19. Modification of Poly(ethylene terephthalate) by Blending with Polyamide-6 Utilizing Reactive Compatibilization
Seung Yong Shin1, Kwan Han Yoon2, Byung Gil Min3
1&2Dept. of Materials Design and Engineering, Kumoh National Institute of Technology, Korea, 3Dept. of Chemical Engineering, Kumoh National Institute of Technology, Korea

P.S.A.11. Thermal and mechanical properties of Poly(ethylene terephthalate) Copolymer containing bis(dimethyl-2-hydroxyethyl) tetraoxaspiro undecane
Seung Ho Jeong1, Byung Gil Min2, Kwan Han Yoon1
1Department of Chemical Engineering, and 2Department of Material Design Engineering, Kumoh National Institute of Technology, Gumi, 730-701, Korea

Symposium B: Advanced materials for high-technology applications - Session 1

P.S.B.1. The influence of changes in Ca/Y concentration ratio on the spectroscopic properties of europium doped Ca9Y(PO4)7 phosphor for white light emitting diodes
Natalia Gorecka, K. Szczodrowski, A. Lazarowska, J. Barzowska, M. Grinberg
Institute of Experimental Physics, Faculty of Mathematics, Physics and Informatics, University of Gdansk, Wita Stwosza 57, 80-308 Gdansk, Poland

P.S.B.2. Spectroscopic properties of Eu2+ and Eu3+ doped barium potassium phosphate
Anna Baran1, Sebastian Mahlik1, Marek Grinberg1, Adam Watras2, Robert Pazik2, Przemyslaw Deren2
1Institute of Experimental Physics, Faculty of Mathematics, Physics and Informatics, University of Gdansk, Wita Stwosza 57, 80-308 Gdansk, Poland, 2Institute of Low Temperature and Structure Research, Polish Academy of Sciences, 2 Okólna Street, 50-422 Wroclaw, Poland

P.S.B.3.  Effect of external influences on Fe- Cr - based alloys studied by positron annihilation spectroscopy
Jarmila Degmová, Jana Šimeg Veterniková, Veronika Sabelová, Július Dekan, Milan Pavúk, Stanislav Sojak, Martin Petriska, Vladimír Slugeň
Institute of Nuclear and Physical Engineering, Slovak University of Technology, Ilkovičova 3, 812 19 Bratislava, Slovakia

P.S.B.4.  The optimization of EVA monolith synthesis for effective immobilization of Candida rugosa lipase
Zorica Veličić1, Nataša Tomić2, Nevena Prlainović2, Jelena Rusmirović2, Aleksandar D. Marinković3, Milka Vidović1
1Institute of Chemistry, Technology and Metallurgy, University of Belgrade, Njegoševa 4, 11000, Serbia, 2Innovation Center of the Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11120 Belgrade, Serbia, 3Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11120 Belgrade, Serbia

P.S.B.5.  Transport properties of Ar+ in Ar/CF4 mixtures for technological applications
Željka Nikitović, Zoran Raspopović and Vladimir Stojanović
Institute of Physics University of Belgrade, Pregrevica 118, 11080 Belgrade, Serbia

P.S.B.6.  Optimization of magnetoimpedance sensing properties of FeCuNbSiB amorphous microwires
Nebojša Mitrović, Jelena Orelj, Siniša Randjić, Slobodan Djukić
Faculty of Technical Sciences Čačak, University of Kragujevac, Serbia

P.S.B.7.  Improvement of cup anemometer class by bearing design
Miodrag Zlatanović and Ivan Popović
School of Electrical Engineering, University of Belgrade, Serbia

 

 

Wednesday, September 6, 2017


SYMPOSIUM F: Renowned scientists from ex-Yugoslavia

Session I: 09.00-11.00

Chairmen: Radoslav R. Adžić and Nenad M. Marković

0900-0930
Platinum monolayer fuel cell electrocatalysts
Radoslav R. Adžić
Chemistry Department, Brookhaven National Laboratory, Upton, NY 11973, U.S.A.

0930-1000
Energy and fuels from electrochemical interfaces
P. Papa Lopes, D. Strmcnik, V. Stamenković and Nenad M. Marković
Materials Science Division, Argonne National Laboratory, USA

1000-1030
Tailored materials for electrochemical applications
Vojislav Stamenković
Argonne National Laboratory, Materials Science Division, United States

1030-1100
Nanostructured catalyst engineering towards efficient solar fuel production
J. Jia1,2, A. Jelle1,2, G. A. Ozin2 and Doug D. Perović1
1Department of Materials Science and Engineering, University of Toronto, Canada, 2Department of Chemistry, University of Toronto, Canada

Break: 1100-1130

Session II: 11.30-13.00

Chairmen: Zlatko Sitar and Gyula Eres

1130-1200
On the frontiers of ultra-wide bandgap semiconductors
Zlatko Sitar
Materials Science and Engineering, North Carolina State University, USA

1200-1230
Exploring nanomaterials synthesis on the length scale of fundamental building blocks
Gyula Eres
Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge TN 37831, USA

1230-1300
Formation mechanism of photovoltaic perovskite nanowires
Endre Horváth1, Massimo Spina1, Bálint Náfrádi1, Eric Bonvin1, Andrzej Sienkievicz1, Zsolt Szekrényes2, Hajnalka Tóháti2, Katalin Kamarás2, Richard Gaal3, László Forró1
1EPFL SB IPHYS LPMC, station 3, 1015, Lausanne, Switzerland, 2Wigner Research Centre for Physics, 1525, Budapest, Hungary, 3EPFL SB IPHYS EPSL, station 3, 1015, Lausanne, Switzerland

1300-1500 Break

 

Session III: 15.00-17.00

Chairpersons: Tijana Rajh and Marija Drndić

1500-1530
Two Decades of Commercializing Nanotechnology for Medical Devices
Thomas J. Webster
Department Chemical Engineering; Northeastern University; USA


1530-1600
TiO2 Nanocomposites for Biomedical Applications
Fatima Rizvi1,2 Tamara Koritarov1,3 Nada Dimitrijevic1, Vani Konda3, Marc Bissonnette3, Tijana Rajh1
1Center for Nanoscale Materials, Argonne National Laboratory, Lemont, Illinois, 2Department of Bioengineering, University of Illinois, Chicago, Illinois, 3Department of Medicine, The University of Chicago, Chicago Illinois

1600-1630
2D materials nanosculpting and bioelectronics applications
Marija Drndić
Department of Physics and Astronomy, University of Pennsylvania, USA


1630-1700
Calcium phosphate as a key material for socially responsible tissue engineering
Vuk Uskoković, Victoria M. Wu
Department of Biomedical and Pharmaceutical Sciences, Center for Targeted Drug Delivery, Chapman University, Irvine, CA 92618-1908, USA

1700-1800 Break

Session IV: 17.30-19.00

Chairmen: Andraš Kiš and Dušan Lošić

1730-1800
Graphene research and development: opportunities and challenges
Dušan Lošić, Diana Tran, Tran Thanh Tung, Md J. Nine, Shervin Kabiri, Ramesh Karunagaran, Faisal Alotaibi, Campbell Coghlan
The University of Adelaide, School of Chemical Engineering, North Eng. Building, Adelaide, 5000, SA, Australia

1800-1830
2D dichalcogenide electronic materials and devices
Andraš Kiš
École Polytechnique Fédérale de Lausanne, Switzerland

1830-1900
Nanopores in 2d materials‐opportunities and challenges
Aleksandra Radenović
Laboratory of Nanoscale Biology, Institute of Bioengineering, School of Engineering, École Polytechnique Fédérale de Lausanne, Switzerland

 

Poster Session II: 2000-2200

Symposium B: Advanced materials for high-technology applications - Session 2

P.S.B.8. Determination of the elastic modulus of partially intercalated and exfoliated polymer-clay nanocomposites using numerical homogenization techniques
Youcef Djebara1, Salah Madani1, Toufik Kanit2
1Laboratory of Mechanical Structures and Materials, University of Batna 2, Algeria, 2Laboratory od Mechanis of Lille, University of Lille 1, France

P.S.B.9. Production of 99Mo/99mTc generators - Advantages of dry column
Đorđe Petrović, Marko Perić, Drina Janković, Aleksandar Vukadinović, Dragana Stanković, Marija Mirković, Magdalena Radović, Sanja Vranješ-Đurić
University of Belgrade, Vinča Institute of Nuclear Sciences, Laboratory for radioisotopes, P. O. Box 522, 11001 Belgrade, Serbia

P.S.B.10. High-energy spectroscopy of YbM2P2 compounds
Ivan Shcherba1,2, Henrik Noga1, Viktor Antonov3, Dragan Uskoković4, Maria Kovalska2, Bohdan Jatcyk5
1Institute of Technology, the Pedagogical University of Cracow, Podchorozych st. 2 Cracow 30-084 Poland, 2Ivan Franko National University of Lviv, Ukraine, 3Institute of Physics of Metals, NASU, Kyiv, Ukraine, 4Institute of Technical Sciences of SASA, Belgrade, Serbia, 5Lviv National University of Veterinary Medicine and Biotechnologies, Lviv, Ukraine

P.S.B.11. Influence of electrode thickness on the electrochemical properties of activated ion-track carbon supercapacitors
Petar Laušević1,2, Milica Marčeta Kaninski1, Vladimir Nikolić1, Pavel Apel3, Maria Eugenia Toimil-Molares4 and Zoran Laušević1
1Laboratory of physical chemistry, Vinča institute of nuclear sciences, University of Belgrade, PO Box 522, 11001 Belgrade, Serbia, 2School of Electrical Engineering, University of Belgrade, Bulevar kralja Aleksandra 73, 11120 Belgrade, Serbia, 3Flerov laboratory of nuclear reactions, Joint institute for nuclear research, 141980 Dubna, Russia, 4GSI Helmholtzzentrum für Schwerionenforschung, 64291 Darmstadt, Germany

P.S.B.12.  Temperature dependence of relaxation times of quasiparticles in graphene
Stevo Jaćimovski1, Dejan Raković2
1Academy of Criminalistic and Police Studies, Belgrade, Serbia, 2University of Belgrade, Faculty of Electrical Engineering, Serbia

P.S.B.13.  Crystal structure and magnetic properties of Bi1-xAexFe1-xTixO3 (Ae=Ca, Sr, Ba) multiferroics
Uladzimir Khomchanka and José António Paixão
CFisUC, Department of Physics, University of Coimbra, P-3004-516 Coimbra, Portugal

P.S.B.14.  The fabrication of tubular spinel cobalt manganese oxide by single-spinneret electrospinning as a high-performance electrode for aqueous supercapacitors
Daniel M. Mijailović, Vesna J. Radojević, Dušica B. Stojanović, Đorđe T. Janaćković, Petar S. Uskoković
University of Belgrade, Faculty of Technology and Metallurgy; Serbia

Symposium C: Nanostructured materials - Session 1

P.S.C.1. Effect of W-doped TiO2 nanopowders on photocatalytic degradation of selected psychoactive drugs
Nina Finčur1, Maja Šćepanović2, Mirjana Grujić-Brojčin2, Aleksandar Golubović2, Biljana Abramović1
1University of Novi Sad, Faculty of Sciences, Department of Chemistry, Biochemistry and Environmental Protection, Trg D. Obradovića 3, 21000 Novi Sad, Serbia, 2University of Belgrade, Institute of Physics, Center for Solid State Physics and New Materials, Pregrevica 118, 11080 Belgrade, Serbia

P.S.C.2. Activity of pure ZnO and ZnO/MWCNTs nanoparticles in degradation of clomazone under different type of irradiation
Vesna Despotović1, Nina Finčur1, Goran Bošković2, Sanja Panić2, Biljana Abramović1
1University of Novi Sad, Department of Chemistry, Biochemistry and Environmental Protection, Faculty of Sciences, Trg Dositeja Obradovića 3, 21000 Novi Sad, Serbia, 2University of Novi Sad, Faculty of Technology, Bulevar Cara Lazara 1, Novi Sad, Serbia

P.S.C.3. In-situ study of the oxygen-induced transformation of pyrochlore Ce2Zr2O7+x to the kK-Ce2Zr2O8 Phase
Igor Đerđ1, Sven Urban2, Paolo Dolcet3, Limei Chen4, Maren Möller2, Silvia Gross3, Peter J. Klar4, Bernd Smarsly2, Herbert Over2
1Department of Chemistry, Josip Juraj Strossmayer University of Osijek, Cara Hadrijana 8/A, 31000 Osijek, Croatia, 2Physikalisch-Chemisches Institut, Justus-Liebig-Universität, Heinrich-Buff-Ring 17, 35392 Gießen, Germany, 3Dipartimento di Scienze Chimiche, Università degli Studi di Padova via Francesco Marzolo, 1, I-35131 Padova, Italy, 4I. Physikalisches Institut, Justus Liebig University, Heinrich-Buff-Ring 16, 35392 Giessen, Germany

P.S.C.4. One-step production of nanoalloys in Pt-Co, Pt-Fe, Pt-Ni systems
Evgeny Y. Filatov, Andrey V. Zadesenets, Sergey V. Korenev
1Nikolaev Institute of Inorganic Chemistry of Siberian Branch of the Russian Academy of Sciences, Akademika Lavrenteva ave., 3, Novosibirsk, 630090, Russia, 2Novosibirsk State University, Pirogova str., 2, Novosibirsk, 630090, Russia

P.S.C.5. Liquid phase sodium intercalation into layered transition metal chalcogenides
Pavel A. Poltarak, Sofia B. Artemkina, Vladimir E. Fedorov
Nikolaev Institute of Inorganic Chemistry, Russia

P.S.C.6.  Temperature dependence of morphology and size of ZrS3 and TiS3 particles in colloidal dispersions
Anastasiia A. Poltarak, Pavel A. Poltarak, Mariia N. Kozlova, Sofia B. Artemkina, Vladimir E. Fedorov
Nikolaev Institute of Inorganic Chemistry, Russia

P.S. C.7. Oxidative longitudinal unzipping of short MWCNTs toward graphene nanoribbons
Igor Medić1, Sanja Panić2, Elvira Đurđić3, Danica Jović1, Goran Bošković2, Željka Cvejić3, Srđan Rakić3, Aleksandar Đorđević1
1Department of Chemistry, Biochemistry and Environmental Protection, Faculty of Sciences, University of Novi Sad, Trg Dositeja Obradovića 3, 21000 Novi Sad, Serbia, 2Faculty of Technology, University of Novi Sad, Bulevar Cara Lazara 1, 21000 Novi Sad, Serbia, 3Department of Physics, Faculty of Sciences, University of Novi Sad, Trg Dositeja Obradovića 4, 21000 Novi Sad, Serbia

P.S.C.8. Selectivity manipulation of ultrathinfilm-structure optical characteristics
Jovan P. Šetrajčić1, Igor J. Šetrajčić1, Ana J. Šetrajčić–Tomić2, Siniša M. Vučenović3, and Stevo K. Jaćimovski4
1University of Novi Sad, Faculty of Sciences, Department of Physics, Novi Sad, Vojvodina – Serbia, 2University of Novi Sad, Faculty of Medicine, Department of Pharmacy, Novi Sad, Vojvodina – Serbia, 3University of Banja Luka, Faculty of Sciences – Physics, Banja Luka, Republic of Srpska – B&H, 4Academy of Criminalistic and Police Studies, Zemun – Belgrade, Serbia

P.S.C.9.    Accelerated service life test of electrodeposited NiSn coatings as bifunctional hydrogen and oxygen evolution catalysts for alkaline water electrolysis
Ljiljana Gajić-Krstajić1, Vladimir Jović2, Borka Jović2, Uroš Lačnjevac2, Nedeljko Krstajić3, Piotr Zabinski4, Nevenka Elezović2
1Institute of Technical Sciences SASA, Knez Mihajlova 35, 11000 Belgrade, Serbia, 2Institute for Multidisciplinary Research University of Belgrade, P.O. Box 33, 11030 Belgrade, Serbia, 3Faculty of Technology and Metallurgy University of Belgrade, Karnegijeva 4, 11000 Belgrade, Serbia, 4AGH University of Science and Technology, Faculty of Non-Ferrous Metals, Al. Mickiewicza 30,30-059 Krakow, Poland

P.S.C.10.   Zero-dimensional hexagonal stanene nanostructures in magnetic field
Dušan Z. Jakovljević1, Milan Ž. Tadić1, Marko M. Grujić1, Vladimir V. Arsoski1, François M. Peeters2
1School of Electrical Engineering, Unversity of Belgrade, P.O. Box 3554, 11120 Belgrade, Serbia, 2Department of Physics, University of Antwerp, Groenenborgerlaan 171, B-2020 Antwerp, Belgium

P.S.C.11. Three novel bis-phosphonate-coated MNPs labeled with 99mTc as multifunctional agents for possible use in medicine
Marija Mirković, Magdalena Radović, Drina Janković, Aleksandar Vukadinović, Marko Perić, Dragana Stanković, Đorđe Petrović, Sanja Vranješ-Đurić
University of Belgrade, Vinča Institute of Nuclear Sciences, Laboratory for radioisotopes, P. O. Box 522, 11001 Belgrade, Serbia

P.S.C.12. Spectral analysis of the ordering effect of starch coated magnetite nano-particles
Marko Perić, Drina Janković, Aleksandar Vukadinović, Dragana Stanković, Đorđe Petrović,  Marija Mirković, Magdalena Radović, Sanja Vranješ-Đurić
University of Belgrade, Vinča Institute of Nuclear Sciences, Laboratory for radioisotopes,  P. O. Box 522, 11001 Belgrade, Serbia

 

Thursday, September 7, 2017

Main Conference Hall

Fifth plenary session: 08.30-11.00

Chairmen: Zoran V. Popović and Yimei Zhu

0830-0900
From MAX to MXene - From 3D to 2D
Michel W. Barsoum
Department of Materials Science and Engineering, Drexel University, Philadelphia, PA 19104, USA

0900-0930
Atomically resolved interfacial coupling and polarization of ABO3 heterostructures
Yimei Zhu
Department of Condensed Mater Physics and Materials Science, Brookhaven National Laboratory, Upton, NY 11973 USA

0930-1000
Half-Heusler spinodal thermoelectrics with high ZT
Peter Rogl1, Andrij Grytsiv1, Matthias Gürth1, Philipp Sauerschnig1, Jan Vrestal2, Vitalij Romaka3, Gerda Rogl1, Kunio Yubuta4, Ernst Bauer1
1Christian Doppler Laboratory for Thermoelectricity at the Institute of Materials Chemistry and Research, University of Vienna, Vienna, Austria and at the Institute of Solid State Physics, Vienna University of Technology, Vienna, Austria, 2Department of Chemistry, Masaryk University, Kotlarska 2, Brno 61137, CR, 3Department of Materials Science and Engineering, Lviv Polytechnic National University, 79013 Lviv, Ukraine, 4Institute for Materials Research, Tohoku University, Katahira 2-1-1, Sendai 980-8577, Japan

1000-1030
Nanomagnetism: Superparamagnetism in iron - doped CeO2-y nanocrystals
Zoran V. Popović
Center for Solid State Physics and New Materials, Institute of Physics, University of Belgrade, Pregrevica 118, 11080 Belgrade, Serbia

1030-110
Tailoring epitaxial oxide thin film on Si(001) using pulsed-laser deposition
Matjaž Spreitzer, Daniel Diaz, Tjaša Parkelj, Urška Gabor, Danilo Suvorov
Advanced Materials Department, Jožef Stefan Institute, Jamova 39, Ljubljana, Slovenia

Break: 1100-1130

 

Small Conference Hall

First Oral Session: 11.30-13.00

Chairpersons: Gerda Rogl and Jan Cerny

1130-1145
Mechanical properties of high efficiency thermoelectric materials (skutterudites, half Heusler alloys and clathrates)
Gerda Rogl1,2,3,4, Andriy Grytsiv1,2,3, Ernst Bauer1,3, Micheal Zehetbauer4, Peter Rogl1,2
1Christian Doppler Laboratory for Thermoelectricity, 2Institute of Materials Chemistry and Research, University of Vienna, Austria, Währingerstrasse 42, A-1090 Wien, 3Institute of Solid State Physics, Vienna University of Technology, Austria, Wiedner Hauptstrasse, 8-10, A-1040 Wien, 4Faculty of Physics, University of Vienna, Austria, Boltzmanngasse 5, A-1090 Wien

1145-1200
Plasma electrolytic oxidation of TA6V for the improvement of its surface hardness
Marie Laveissière1,2, Hélène Cerda1, Jérôme Roche2, Laurent Arurault2
1IRT Saint-Exupéry, 118 route de Narbonne – CS 44248, 31432 Toulouse cedex 4, France, 2CIRIMAT, Université de Toulouse, CNRS, INPT, UPS, Université Toulouse III Paul Sabatier, Bât. CIRIMAT, 118 route de Narbonne, 31062 Toulouse cedex 9, France

1200-1215
Structural investigation of the AZ61 Magnesium alloy, in dependence of various heat treatment processes, TEM analyze
Edlira Prespa, Jorgaq Kacani, Ylli Shehu
Polytechnic University of Tirana, Albania

1215-1230
Application of new modifier CaSiBa containing barium during production of low alloy steel
Jan Cerny, Pavel Ludvik, Martina Sipova, Josef Odehnal
COMTES FHT, Prumyslova 995, Dobrany, 334 41, Czech Republic

1230-1245
Influence of the type of substrate rotation on microstructure of magnetron sputtered nanolayered TiAlN/TiSiN coatings
Aleksandar Miletić1, Peter Panjan2, Miha Čekada2, Lazar Kovačević1, Pal Terek1, Branko Škorić1, Goran Dražič3, Janez Kovač2
1Faculty of Technical Sciences, University of Novi Sad, Novi Sad, Serbia, 2Jožef Stefan Institute, Ljubljana, Slovenia, 3National Institute of Chemistry, Ljubljana, Slovenia

1245-1300
Synthesis and thermal stability of immiscible metal (Au–Rh, Au–Ir, Au–Ir–Rh and Pd-Rh) nanoalloys
Yury Shubin, Pavel Plyusnin, Sergey Korenev, Aleksey Vedyagin
1Nikolaev Institute of Inorganic Chemistry SB RAS, Novosibirsk, Russia, 2Boreskov Institute of Catalysis SB RAS, Novosibirsk, Russia

 

Small Conference Hall

Second Oral Session: 11.30-13.00

Chairmen: Branko Matović and Błażej Scheibe

1130-1145
Synthesis, processing, thermal and luminescence properties of Eu3+ -doped Gd2O3 powders
Branko Matović1, Jelena Maletaskić1, Marija Prekajski Đorđević1, Katsumi Yoshida2, Toyohiko Yano2, Marko Nikolić3, Branimir Jelenković3
1Centre of Excellence-CextremeLab Vinca, Institute for Nuclear Sciences, University of Belgrade, Belgrade, Serbia, 2Laboratory for Advanced Nuclear Energy, Institute of Innovative Research, Tokyo Institute of Technology, 2-12-1, Ookayama, Meguro-ku, Tokyo, 152-8550 Japan, 3Institute for Physics, University of Belgrade

1145-1200
Interrelations between positive and negative coercive fields of ferroelectric domains measured by variable amplitude cycling
Mikhail V. Katkov1,2 and Yuriy V. Pershin3,1
1Nikolaev Institute of Inorganic Chemistry SB RAS, Novosibirsk 630090, Russia, 2Institute of Systems Science, Durban University of Technology, P.O. Box 1334, Durban 4000, South Africa, 3Department of Physics and Astronomy, University of South Carolina, Columbia, SC 29208 USA

1200-1215
Synthesis and characterization of Li2FeP2O7 cathode material
Dragana Jugović1, Miloš Milović1, Miodrag Mitrić2, Nikola Cvjetićanin3, Srečo Škapin4, Dragan Uskoković1
1Institute of Technical Sciences of SASA, Belgrade, Serbia, 2Vinča Institute of Nuclear Sciences, University of Belgrade, Belgrade, Serbia, 3Faculty of Physical Chemistry, University of Belgrade, Belgrade, Serbia, 4Jožef Štefan Institute, Jamova 39, SI-1000 Ljubljana, Slovenia

1215-1230
Preparation, modification and application of multi-layered MXene structures in gas sensors
Błażej Scheibe1, Katarzyna Dunst2, Marcin Jarek1, Barbara Peplińska1, Piotr Jasiński2, Stefan Jurga1
1NanoBioMedical Centre Adam Mickiewicz University in Poznań, 2Faculty of Electronics, Telecommunications and Informatics, Gdańsk University of Technology, Poland

1230-1245
Tuning electronic properties of MoS2 by doping nonisovalent niobium and rhenium ions
Alexandra Yu. Ledneva, Svetlana A. Dalmatova, Anastasiya D. Fedorenko, Lev N. Mazalov, Vladimir E. Fedorov
Nikolaev Institute of Inorganic Chemistry SB RAS, Russia

1245-1300
Enhanced natural sunlight- and artificial UV-driven photocatalytic activity of mechanically activated ZnO/SnO2 composite
Smilja Marković1, Ana Stanković1, Jasmina Dostanić2, Lidija Mančić1, Srečo Davor Škapin3, Dragan Uskoković1
1Institute of Technical Sciences of SASA, Knez Mihailova 35/IV, 11000 Belgrade, Serbia, 2University of Belgrade, IChTM Center for Catalysis, Belgrade, Serbia, 3Jožef Stefan Institute, Jamova 39, 1000 Ljubljana, Slovenia

 

 

Poster Session: 2000-2200

Symposium C: Nanostructured materials - Session 2

P.S.C.13. Electrospun PMMA nanofibers doped with CdSe/ZnS core shell quantum dots
Rouaida  M. Abozaid1, Dušica B. Stojanović1, Anđela Radisavljević1, Dragutin M. Sević2, Maja S. Rabasović2, Petar S. Uskoković1, Vesna Radojević1
1University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, 2University of Belgrade, Institute of Physics, Zemun, Serbia

P.S.C.14. Formation of nanocrystalline 9R silicon hexagonal phase under multi-ion implantation into Si and SiO2/Si substrates
David Tetelbaum, Dmitry Korolev, Alena Nikolskaya, Alexey Belov, Alexey Mikhaylov, Nikolay Krivulin, Dmitry Pavlov
Lobachevsky University, Nizhny Novgorod, Russia

P.S.C.15. Enhancing Pt catalytic properties by addition of Au: Could less be more?
Mila N. Krstajić Pajić1, Sanja I. Stevanović1, Vuk V. Radmilović2, Nevenka R. Elezović3, Piotr Zabinski4, Nedeljko V. Krstajić5, Velimir R. Radmilović5,6, Snežana Lj. Gojković5, Vladislava M. Jovanović1
1ICTM - Department of Electrochemistry, University of Belgrade, Serbia, 2IC Faculty of Technology and Metallurgy, University of Belgrade, Serbia, 3Institute for Multidisciplinary Research, University of Belgrade, Serbia, 4AGH University of Science and Technology, Krakow, Poland, 5Faculty of Technology and Metallurgy, University of Belgrade, Serbia, 6Serbian Academy of Sciences and Arts, Belgrade, Serbia

P.S.C.16. Texture evolution of Cu single crystals after drawing
Dorota Moszczyńska, Bogusława Adamczyk-Cieślak, Jarosław Mizera
Faculty of Materials Science and Engineering, Warsaw University of Technology, Woloska 141, 02-507 Warsaw, Poland

Symposium D: Eco-materials and Eco-technologies

P.S.D.1. Magnetite functionalized cellulose membranes for heavy metal removal from water
Jelena D. Rusmirović1, Jovana Nikolić2, Dragana L. Milošević2, Khaled Taleb3, Milka Vidović2, Aleksandar D. Marinković4
1Innovation Center of the Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11120 Belgrade, Serbia, 2Institute of Chemistry, Technology and Metallurgy, University of Belgrade, Njegoševa 4, 11000, Serbia, 3Faculty of Engineering, Al-Jabal Al-Gharbi University, Gharyan, Libya, 4Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11120 Belgrade, Serbia

P.S.D.2. Application of NIR spectroscopy in study of adsorption process of p-Nitrophenol on activated carbon in presence of selected amides
Branko Kordić, Marina Kovačević, Tamara Sloboda, Branislav Jović
Department of Chemistry, Biochemistry and Environmental Protection, Faculty of Sciences, University of Novi Sad, Trg Dositeja Obradovića 3, 21000 Novi Sad, Serbia

P.S.D.3. Calorimetric reserach of arsenate adsorption on silica-based materials
Vesna Rakić1, Jelena Rusmirović2, Aleksandar Marinković2, Slavko Mijatov2, Khaled Ahmed Taleb3, Vincent Folliard4, Georgeta Postole4, Aline Auroux4
1Faculty of Agriculture, University of Belgrade, Nemanjina 6, 11080 Zemun, Serbia; 2Faculty of Technology and Metalurgy,University of Belgrade, Karnegijeva 4, 11000 Belgrade, Serbia; 3Faculty of Engineering, Al-Jabal Al-Gharbi University, Gharyan, Libya; 4IRCELYON CNRS - Université Lyon 1, 2, Av. Einstein, 69626 Villeurbanne Cedex, France

Symposium E: Biomaterials

P.S.E.1. Mono- and dinuclear azido Co(II) complexes with the condensation product of 2-quinolinecarboxaldehyde and Girard’s T reagent
Mima Romanović, Marko Jeremić, Milica Milenković, Božidar Čobeljić, Katarina Anđelković
Faculty of Chemistry, University of Belgrade, Studentski trg 12–16, 11000 Belgrade, Serbia

P.S.E.2. Calvarial defects in rats filled with innovative nanocomposite material. Histological and biochemical studies
Margarita Gabrashanska1, Elena Dyulgerova2, Radost Ilieva2, Veselin Nanev1, Ivelin Vladov1, Petar Dimitrov1, Neli Tsocheva-Gaytandzhieva1
1Institute of Experimental Morphology, Pathology and Anthropology with Museum, Bulgarian Academy of Sciences, Sofia, Bulgaria, 2Institute of General and Inorganic Chemistry, Bulgarian Academy of Sciences, Sofia, Bulgaria

P.S.E.3. Biomimetic approach for preparation of calcium phosphate based cements
Radost Ilieva1, Rumiana Gergulova1, Stefka Tepavitcharova1, Kostadinka Sezanova1, Anton A. Apostolov2, Diana Rabadjieva1
1Institute of General and Inorganic Chemistry, Bulgarian Academy of Sciences, Acad. G. Bontchev Str., Bl.11, 1113 Sofia, Bulgaria, 2Faculty of Chemistry and Pharmacy, Laboratory of Polymers, Sofia University, 1, J. Bourchier Blvd., 1164 Sofia, Bulgaria

P.S.E.4. Corrosion behavior of nanotubular oxide layer formed on titanium and Ti–13Nb–13Zr alloy processed by high pressure torsion
Dragana R. Barjaktarević1, Ivana D. Dimić1, Ivana Lj. Cvijović-Alagić2, Veljko R. Đokić1, Jelena B. Bajat1, Marko P. Rakin1
1Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4 11120 Belgrade, Serbia, 2Institute of Nuclear Sciences ”Vinča”, University of Belgrade, P.O. Box 522, 11001 Belgrade, Serbia

P.S.E.5. Effects of composition and method of preparation on biocompatible and biodegradable behavior of 3-D polymeric scaffolds based on gelatin/alginate/methacrylate
Marija M. Babić1, Jovana S. Vuković1, Katarina M. Antić1, Vuk V. Filipović2, Simonida Lj. Tomić1,*
1Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11000 Belgrade, Serbia, 2Institute for Chemistry, Technology and Metallurgy, University of Belgrade, 11000 Belgrade, Serbia

P.S.E.6. Composite nanostructured HAp/YSZ dental inserts – processing, mechanical properties and application in dental restorations
Giuma Ayoub1, Đorđe Veljović1, Maja Lezaja Zebić2, Eriks Palcevskis3, Vesna Miletić2, Đorđe Janaćković1
1University of Belgrade, Faculty of Technology and Metallurgy, Karnegijeva 4, 11120 Belgrade, Serbia, 2University of Belgrade, School of Dental Medicine, DentalNet Research Group, Rankeova 4, Belgrade, Serbia, 3Riga Technical University, Institute of Inorganic Chemistry, Miera 34, Salaspils, LV-2169, Riga, Latvia

P.S.E.7. Novel composite alginate hydrogels with activated charcoal as a carrier of therapeutically active substances
Andrea Osmokrović1, Ivan Jančić2, Jovana Vunduk3, Nevena Dabović1, Marina Milenković2, Bojana Obradović1
1Faculty of Technology and Metallurgy, University of Belgrade, Belgrade, Serbia, 2Faculty of Pharmacy, University of Belgrade, Belgrade, Serbia, 3Faculty of Agriculture, University of Belgrade, Belgrade, Serbia

P.S.E.8. Towards a bio-nanoreactor by engineering inorganic nanoparticles with cancer cell membranes
Vimal Balasubramanian1, Alexandra Correia1, Hong Zhang2, Flavia Fontana1, Ermei Mäkilä3, Jarno Salonen3, Jouni Hirvonen1, and Helder A. Santos1,4
1Division of Pharmaceutical Chemistry and Technology, University of Helsinki, Finland, 2Department of Pharmaceutical Science, Åbo Akademi University, Finland, 3Department of Physics and Astronomy, University of Turku, Finland, 4Helsinki Institute of Life Science, HiLIFE, University of Helsinki, Finland

P.S.E.9. Alumina based reinforcements for PMMA dental composite materials
Gamal Lazouzi1, Slađana Lakitić1, Marija Dimitrijević2, Nataša Tomić2, Vesna Radojević1, Radmila Jančić Heinemann1
1
University of Belgrade, Faculty of Technology and Metallurgy, Karnegijeva 4, Belgrade, Sebia, 2University of Belgrade, Inovation Center of the Faculty of Technology and Metallurgy, Karnegijeva 4, Belgrade, Sebia

P.S.E.10. Comparative spectroscopic characterization of fullerene nanomaterials
Tamara Jovanović1, Đuro Koruga1, Branimir Jovančićević2, Aleksandra Mitrović3, Dragomir Stamenković4, Ivan Rakonjac3
1Department of Biomedical Engineering, Faculty of Mechanical Engineering, University of Belgrade, Belgrade, Serbia, 2Department of Applied Chemistry, Faculty of Chemistry, University of Belgrade, Belgrade, Serbia, 3Innovation Center of Faculty of Mechanical Engineering, University of Belgrade, Belgrade, Serbia, 4Optix, Inc., Belgrade-Zemun, Serbia

P.S.E.11. 3D finite elements modeling of the interfacial stresses bone/dental implant. Effects of the geometric parameters
Toufik Outtas, Saida Ghoggali, Saber Latrèche
Laboratory of Mechanics of the Structures and Materials, University of Batna 2, Algeria

 

Friday, September 8, 2017

Third Oral Session

Main Conference Hall

Session I: 09.00-10.30

Chairpersons: Nenad L. Ignjatović and Irena Nikolić

0900-0915
Highly selective anticancer activity of core shell particles based on hydroxyapatite, chitosan lactate and different androstane derivatives
Nenad L. Ignjatović1, Katarina M. Penov-Gaši2, Jovana J. Ajduković2, Marija Sakač2, Ivana Kuzminac2, Vesna V. Kojić3, Smilja Marković1, Dragan P. Uskoković1
1Institute of Technical Sciences of the Serbian Academy of Science and Arts, Knez Mihailova 35/IV, P.O. Box 377, 11000 Belgrade, Serbia, 2University of Novi Sad, Faculty of Sciences, Department of Chemistry, Biochemistry and Environmental Protection, Trg Dositeja Obradovića 3, 21000 Novi Sad, Serbia, 3Oncology Institute of Vojvodina, Put Dr Goldmana 4, 21204 Sremska Kamenica, Serbia

0915-0930
The atomic-scale defects at the surface of MgO particles and their antibacterial applications
Nemanja Aničić, Marija Vukomanović, Danilo Suvorov
Advanced Materials Department, Jozef Stefan Institute, Jamova 39 Ljubljana, Slovenia

0930-0945
Design and evaluation of biocompatible 90Y-labeled phosphate-coated MNPs for possible applications in cancer therapy
Magdalena Radović, Marija Mirković, Drina Janković, Aleksandar Vukadinović, Marko Perić, Dragana Stanković, Đorđe Petrović, Sanja Vranješ-Đurić
University of Belgrade, Vinča Institute of Nuclear Sciences, Laboratory for radioisotopes, P. O. Box 522, 11001 Belgrade, Serbia

0945-1000
Hierarchical self-assembly of highly water-soluble fullerene derivatives
Ilija Rašović and Kyriakos Porfyrakis
Department of Materials, University of Oxford, UK


1000-1015
Networks of welded silver nanowires as transparent electrodes
Vuk V. Radmilović1, Peter Ercius2, Colin Ophus3, Erdmann Spiecker4, Velimir V. Radmilović5
1Innovation Center, Faculty of Technology and Metallurgy, University of Belgrade, Serbia, 2National Center for Electron Microscopy, Molecular Foundry, Lawrence Berkeley National Laboratory, Berkeley, USA, 3National Center for Electron Microscopy, Molecular Foundry, Lawrence Berkeley National Laboratory, Berkeley, USA, 4Center for Nanoanalysis and Electron Microscopy, Friedrich Alexander University, Erlangen, Germany, 5Serbian Academy of Sciences and Arts, Belgrade, Serbia


1015-1030
Properties of organic conjugated molecules sensitized by fullerenes
Svetlana Vladimirovna Likhomanova1, Natalia Vladimirovna Kamanina1,2
1Vavilov State Optical Institute, Kadetskaya Liniya V.O., dom.5, korpus 2, St.- Petersburg, 199053, Russia, 2Saint-Petersburg Electrotechical University (“LETI”), St. Petersburg,197376, Russia


1030-1100 Break

Session II: 11.00-12.15

Chairmen: Satoshi Ohara and Wilfried Gille

1100-1130
Organic-ligand-assisted hydrothermal synthesis of tailor-made ceramic nanocrystals towards bio-medical applications
Satoshi Ohara1, Kosuke Nozaki2, Akiko Nagai2, and Kimihiro Yamashita2
1Joining and Welding Research Institute, Osaka University, 2Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental University, Japan

1130-1145
Small-angle scattering of non-convex nanoparticles: The case of a cube, possessing a rectangular indent
Wilfried Gille
Formerly Martin-Luther-University Halle-Wittenberg, Institute of Physics, SAS Laboratory, Germany

1145-1200
Au hollow cylindrical nanostructures as optical tunable nanoresonators
Ana Conde-Rubio1,2, Francesco Pérez-Murano3, Xavier Batlle1,2, Amilcar Labarta1,2
1Department de Física de la Matèria Condensada, Universitat de Barcelona, Barcelona, Spain, 2Institut de Nanociència i Nanotecnologia(IN2UB), Universitat de Barcelona, 3Instituto de Microelectrónica de Barcelona (IMB-CNM, CSIC) UAB, 08193 Bellaterra, Barcelona, Spain

1145-1200
Process development for reproducible synthesis of magnetic eco-friendly adsorbent
Doina Hritcu, Alina Ibanescu, Marcel I. Popa
Faculty of Chemical Engineering and Environmental Protection, “Gheorghe Asachi” Technical University of Iasi, Romania

1200-1215
The slag based adsorbents for Cu2+ removal from aquatic solutions
Irena Nikolić1, Dijana Đurović2, Ivana Milašević3, Smilja Marković4, Vuk Radmilović5, Velimir Radmilović6
1University of Montenegro, Faculty of Metallurgy and Technology, Podgorica, Montenegro, 2Institut of Public Health of Montenegro, Podgorica, Montenegro, 3Centre of Excellence in Bioinformatics, Faculty of Electrical Engineering, University of Montenegro, Podgorica, Montenegro, 4Institute of Technical Sciences of SASA, Belgrade, Serbia, 5Innovation center, University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia, 6Serbian Academy of Sciences and Arts, Belgrade, Serbia

 

 
Fourth Oral Session

Small Conference Hall

Session I: 09.00-10.30

Chairpersons: Julija R. Šćepanović and Marko Radović

0900-0915
Particle morphology effects in random sequential adsorption
Ljupka Budinski Petković1, Ivana Lončarević1, Dijana Dujak2, Aleksandar Karac3, Julija R Šćepanović4, Zorica M Jakšić4, Slobodan B Vrhovac4
1Faculty of Engineering, Trg D. Obradovica 6, Novi Sad, 21000 Serbia, 2Faculty of Metallurgy and Materials, University of Zenica, Zenica, Bosnia and Herzegovina, 3Polytechnic Faculty, University of Zenica, Zenica, Bosnia and Herzegovina, 4Scientific Computing Laboratory, Center for the Study of Complex Systems, Institute of Physics Belgrade, University of Belgrade, Pregrevica 118, Zemun 11080, Belgrade, Serbia

0915-0930
Inkjet printing of TiO2 nanoparticles on flexible substrates
Slavica M. Savić1, Sanja Kojić2, Jaroslav Katona3, Jelena Vukmirović3, Georges Dubourg1, George Niarchos1, Marko Radović1
1Biosense Institute, Research Institute for Information Technologies in Biosystems, Novi Sad, Serbia, 2Faculty of Technical Sciences, University of Novi Sad, Novi Sad, Serbia, 3Faculty of Technology, University of Novi Sad, Novi Sad, Serbia

0930-0945
Photocatalytic hollow TiO2 and ZnO nanospheres prepared by atomic layer deposition
László Péter Bakos1, Nóra Justh1, Klára Hernádi2, Gabriella Kiss2, Balázs Réti2, Zoltán Erdélyi3, Bence Parditka3 and Imre Miklós Szilágyi1
1Department of Inorganic and Analytical Chemistry, Budapest University of Technology and Economics, H-1111 Budapest, Hungary, 2Department of Applied and Environmental Chemistry, University of Szeged, H-6720 Szeged, Hungary, 3Department of Solid State Physics, University of Debrecen, H-4026 Debrecen, Hungary

0945-1000
Preparation of iron tungstate (FeWO4) nanosheets by hydrothermal method
Teodóra Nagyné Kovács1, György Pokol1,2, Fanni Gáber1, Dávidné Nagy3, Tamás Igricz4, István Endre Lukács5, Zsolt Fogarassy5, Katalin Balázsi5, Imre M. Szilágyi1
1Department of Inorganic and Analytical Chemistry, Budapest University of Technology and Economics, Műegyetem rakpart 3., Budapest, H-1111, Hungary, 2Research Centre for Natural Sciences, Hungarian Academy of Sciences, Magyar tudósok körútja 2., Budapest, H-1117, Hungary, 3Institute for Materials and Processes, School of Engineering, The University of Edinburgh, The King's Buildings, Mayfield Road, Edinburgh, EH9 3JL, United Kingdom, 4Department of Organic Chemistry and Technology, Budapest University of Technology and Economics, H–1111 Budapest, Budafoki út 8. Hungary; 5Research Institute for Technical Physics and Materials Science, Hungarian Academy of Sciences, Konkoly-Thege út 29-33., Budapest, H-1121 Hungary


1000-1015
Preparation and investigation of the photocatalytic properties of core/shell nanocomposites
Orsolya Kéri1, Eszter Kocsis1, Lenke Kócs2, Zoltán Hórvölgyi2, Levente Kárpáti2, Bence Parditka3, Zoltán Erdélyi3, Imre Miklós Szilágyi1
1Budapest University of Technology and Economics, Department of Inorganic and Analytical Chemistry, 2Budapest University of Technology and Economics, Department of Physical Chemistry and Materials Science, 3University of Debrecen, Department of Solid State Physics, Hungary


1015-1030
Reductive properties of nanocrystalline Al-modified cobalt oxides: in situ XRD investigation
Svetlana Cherepanova1,2, Olga Bulavchenko1,2, Irina Simentsova1
1Boreskov Institute of Catalysis, Lavrentieva prospect 5, Novosibirsk, 630090, Russia, 2Novosibirsk State University, Pirogova street 2, Novosibirsk, 630090, Russia


1030-1100 Break

Session II: 11.00-12.15

Chairmen: Waldemar Swiderski and Alexander Kurbakov

1100-1115
Non-destructive testing of cover made of CFRP after ballistic impacts by IR thermography methods
Waldemar Swiderski
Military Institute of Armament Technology, Poland

1115-1130
Ductile/brittle polymer system modified with carbon nanoplatelets: Effect of components coupling
Ivan Kelnar, Jaroslav Kratochvíl
Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovsky Sq. 2, 162 06 Prague, Czech Republic

1130-1145
Neutron and synchrotron diffraction studies of low dimensional frustrated magnets with unique magnetic, electrical and redox properties
Alexander Kurbakov1,2, Artem Korshunov1,2, Mariia Kuchugura1,2, Stanislav Podchezertsev1, Juan Rodriguez-Carvajal3
1Petersburg Nuclear Physics Institute, NRC Kurchatov Institute, 188300, Gatchina, Russia, 2St.Petersburg State University, Faculty of Physics, 198504, St. Petersburg, Russia, 3Institut Laue Langevin – CS 20156 - 38042 Grenoble, France

1145-1200
The study of the correlation between surface chemistry and charge storage properties of graphene oxide
Zoran Jovanović1, Danica Bajuk-Bogdanović2, Sonja Jovanović1, Željko Mravik2, Ivanka Holclajtner-Antunović2, Milica Vujković2
1Laboratory of Physics, Vinča Institute of Nuclear Sciences, University of Belgrade, P.O. Box 522, 11001 Belgrade, Serbia, 2Faculty of Physical Chemistry, University of Belgrade, P.O. Box 47, 11158 Belgrade, Serbia

1200-1215
Influence of zinc doping on the magnetic properties of cobalt ferrite nanoparticles
Sonja Jovanović1, Bojana Nedić-Vasiljević2, Danica Bajuk-Bogdanović2, Davide Peddis3
1
Laboratory of Physics, Vinca Institute of Nuclear Sciences, University of Belgrade, Belgrade, Serbia, 2Faculty of Physical Chemistry, University of Belgrade, Belgrade, Serbia, 3nM2-Lab, Istituto di Struttura della Materia, CNR, Monterotondo Scalo (Roma) 00015, Italy

 


Closing ceremony 1230-1300

Main Conference Hall

member since 2008