Monday, August 29, 2022

Main Conference Hall

 

09.30-10.15

The Laureate of the 2022 MRS-Serbia,
Award for a Lasting and Outstanding Contribution to Materials Science and Engineering
Richard W. Siegel
Materials Science and Engineering, Rensselaer Polytechnic Institute, Troy, New York, USA

Looking Back, Moving Forward - On safari in materials with gun and camera
 

10.15-10.45 BREAK

 

First YUCOMAT Plenary Session

Chairpersons: Sir Andre K. Geim, Nobel Prize Winne, Pulickel M. Ajayan


10.45-11.30 Y.PL.S.I.1.

Sir Andre K. GeimNobel Prize Winner in Physics

University of Manchester, United Kingdom
Two-dimensional emptiness and its unique properties

 

11.30-12.15 Y.PL.S.I.2.

Pulickel M. Ajayan

Department of Materials Science and NanoEngineering, Rice University, Houston, Texas, USA

Materials science with 2D atomic layers


12.15-12.45 Y.PL.S.I.3.

Horst Hahn, Gleb Iankevich, Ramin Shadkam

Institute of Nanotechnology (INT), Karlsruhe Institute of Technology (KIT), Germany

Cluster-assembled materials

 

12.45-13.15  Y.PL.S.I.4.

Xiaoqing Pan 

Department of Materials Science and Engineering, Department of Physics and Astronomy, Irvine Materials Research Institute (IMRI), University of California, Irvine, CA 92697, USA

Probing structure and dynamic behaviors of topological polar solitons by electron microscopy

 

First WRTCS Plenary Session

Chairpersons: Eugene A. Olevsky and Suk-Joong L. Kang

 

10.30-11.00 W.PL.S.I.1.

Eugene A. Olevsky

San Diego State University

Sintering assisted additive manufacturing

 

11.00-11.30 W.PL.S.I.2.

Rajendra Bordia, Fei Peng

Materials Science and Engineering, Clemson University,Clemson, SC 29634 USE

Challenges and opportunities for machine learning approaches for sintering and microstructure development

 

11.30-12.00  W.PL.S.I.3.

Olivier Guillon

Institute of Energy and Climate Research: Materials Synthesis and Processing  Forschungszentrum Jülich GmbH & RWTH Aachen University, Germany

Electric field assisted sintering of oxide ceramics: fields matter!

 

12.00-12.30 BREAK

 

12.30-13.00 W.PL.S.I.4.

Hamish Fraser

Center for the Accelerated maturation of Materials, Department of Materials Science and Engineering, The Ohio State University, Columbus, OH, USA

Enhancing powder metallurgy processing using advanced microstructural characterization and physical metallurgy

 

13.00-13.30 W.PL.S.I.5.

Sotiris E. Pratsinis

Particle Technology Laboratory, Institute of Process Engineering, Swiss Federal Institute of Technology (ETH Zurich), CH-8092 Zurich, Switzerland

The role of sintering in process design for aerosol synthesis of nanostructured materials

 

11.30-12.00  W.PL.S.I.6.

Suk-Joong L. Kang

KAIST, Daejeon, Korea

Grain growth: the mixed control mechanism of atom transport

 

 

Second YUCOMAT Plenary Session

Chairpersons: Yury Gogotsi, John A. Rogers, Robert Sinclair

 

15.00-15.45 Y.PL.S.II.1.

Yury Gogotsi

A.J. Drexel Nanomaterials Institute, and Department of Materials Science and Engineering, Drexel University, Philadelphia, PA, USA
Two-dimensional carbides and nitrides pave the road to future technologies

 

15.45-16.30 Y.PL.S.II.2.

John A. Rogers 

Northwestern University, Evanston, IL, USA
Advanced materials for health monitoring and haptic interactions

 

16.30-17.00 BREAK
 
17.00-17.30 Y.PL.S.II.3.

Robert Sinclair1, Yitian Zeng1, Philip S. Digiacomo2 and Michael M. Zeineh3

Departments of Materials Science and 1Engineering, 2Bioengineering and 3Radiology, Stanford University, Stanford, CA, USA
Correlative imaging of mineral deposits in brain tissue of Alzheimer's Disease patients: application to the valence state of iron deposits by STEM-EELS


17.30-18.00 Y.PL.S.II.4.

Vladimir Torchilin

Center for Pharmaceutical Biotechnology and Nanomedicine, Northeastern University, Boston, MA, USA
Advances in engineering novel materials for nanomedicine

 

18.00-18.30 Y.PL.S.II.5.

Vuk Uskoković

TardigradeNano LLC, Irvine, CA 92604, USA and Department of Mechanical Engineering, San Diego State University, San Diego, CA, USA
SARS-CoV-2: Molecular interaction specifics viewed through the prism of nanotechnologies

 

18.30-18.45 Y.PL.S.II.6.

David Swanson

U.S. Air Force Office of Scientific Research, European Office of Aerospace Research and Development
Air Force Office of Scientific Research Grant Funding Opportunities

 

Tuesday, August 30, 2022

Main Conference Hall

 

First WRTCS Plenary Session

Chairpersons: Eugene A. Olevsky and Suk-Joong L. Kang

 

10.30-11.00 W.PL.S.I.1.

Eugene A. Olevsky

San Diego State University

Sintering assisted additive manufacturing

 

11.00-11.30 W.PL.S.I.2.

Rajendra Bordia, Fei Peng

Materials Science and Engineering, Clemson University,Clemson, SC 29634 USE

Challenges and opportunities for machine learning approaches for sintering and microstructure development

 

11.30-12.00  W.PL.S.I.3.

Olivier Guillon

Institute of Energy and Climate Research: Materials Synthesis and Processing  Forschungszentrum Jülich GmbH & RWTH Aachen University, Germany

Electric field assisted sintering of oxide ceramics: fields matter!

 

12.00-12.30 BREAK

 

12.30-13.00 W.PL.S.I.4.

Hamish Fraser

Center for the Accelerated maturation of Materials, Department of Materials Science and Engineering, The Ohio State University, Columbus, OH, USA

Enhancing powder metallurgy processing using advanced microstructural characterization and physical metallurgy

 

13.00-13.30 W.PL.S.I.5.

Sotiris E. Pratsinis

Particle Technology Laboratory, Institute of Process Engineering, Swiss Federal Institute of Technology (ETH Zurich), CH-8092 Zurich, Switzerland

The role of sintering in process design for aerosol synthesis of nanostructured materials

 

11.30-12.00  W.PL.S.I.6.

Suk-Joong L. Kang

KAIST, Daejeon, Korea

Grain growth: the mixed control mechanism of atom transport

 

Wednesday, August 31, 2022

Main Conference Hall

 

Third YUCOMAT Plenary Session

Chairpersons: Kwang Ho Kim, Peter Rogl

 

10.30-11.00 Y.PL.S.III.1.

Kwang Ho Kim

Global Frontier R&D Center for Hybrid Interface based future Materials, School of Materials Science and Engineering, Pusan National University, Busan 46241, Korea

Hard films for industrial applications: design-synthesis-evaluation

 

11.00-11.30 Y.PL.S.III.2.

P. F. Rogl1, R. Podloucky1, G. Rogl1, H. Michor2, X. Yan2, V. Bursikova3, P. Broz4, J. Bursik5, R. Vaclavik3, Z. Abbasi6, E. Schafler6, G. Giester7

1Institute of Materials Chemistry, Universität Wien, Währingerstr. 42, A-1090 Wien, Austria, 2Institute of Solid State Physics, TU Wien, Wiedner Hauptstr. 8-10, A-1040 Wien, Austria, 3Institute of Physical Electronics, Masaryk Univ., Kotlářská 2, 61137 Brno, Czech Republic, 4Dep. Chemistry, Faculty of Sci., Masaryk Univ., Kotlarska 2, 61137 Brno, Czech Republic, 5Institute of Physics of Materials, Czech Acad. of Sci., Žižkova 22, 61662 Brno, Czech Republic, 6Dynamik Kondensierter Systeme, Univ.   Wien, A 1090 Wien, Botzmanng. 5, Austria, 7Inst. of Mineralogy and Crystallography, Univ. Wien, Althanstr.14, A-1090 Wien, Austria

Structure and properties of the compounds TZnSb, T = Ti, V, Cr

 

11.30-11.45 Y.PL.S.III.3.

Gerda Rogl1,2, Viktor Soprunyuk2 and Peter Rogl1

1Institute of Materials Chemistry, Universität Wien, A-1090 Wien, Austria; 2Physics of Nanostructured Materials, Universität Wien, A-1090 Wien, Austria

Electrical resistivity and thermal expansion (4.2-820 K) of nanostructured skutterudites after severe plastic deformation

 

11.45-12.30 BREAK

 

Fourth YUCOMAT Plenary Session

Chairpersons: Đorđe Janaćković, Petar Uskoković

 
12.30-13.00 Y.PL.S.IV.1.

Zhong Lin Wang

Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, China, School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia USA

The fundamental science and technology applications of triboelectric nanogenerators


13.00-13.30 Y.PL.S.IV.2.

Andrey L. Rogach

Department of Materials Science and Engineering, and Center for Functional Photonics, City University of Hong Kong, Hong Kong SAR

Carbon dot luminophores

 

13.30-14.00 Y.PL.S.IV.3. VIRTUAL

Ivan Božović

Brookhaven National Laboratory, Upton, NY 11973, USA, Yale University, New Haven, CT 06520, USA

Electron liquid crystals: a Materials science minefield

 

Thursday, September 1, 2022

Main Conference Hall

 

Second WRTCS Plenary Session

Chairpersons: Biljana Stojanović, Boris Feigelson

 

10.00-10.30 W.PL.S.II.1.

Boris N. Feigelson, James A. Wollmershauser, Kevin P Anderson, Benjamin L Greenberg, Alan G Jacobs

U.S. Naval Research Laboratory, 4555 Overlook Ave., SW, Washington, DC 20375, USA

From nanoparticles to nanocrystalline solids with designed functionalities

 

10.30-11.00 W.PL.S.II.2.

Ricardo Serrazina1, Luis Pereira2, Paula M. Vilarinho1Ana Senos1

1Department of Materials and Ceramic Engineering, CICECO-Aveiro Materials Institute, University of Aveiro, 3810-193 Campus Santiago, Portugal, 2CENIMAT-I3N, School of Science and Technology, FCT-NOVA, Universidade NOVA de Lisboa, Campus da Caparica. 2829-516 Caparica, Portugal

Studies on the flash sintering of KNN: flash variables, mechanisms and material’s properties

 

11.00-11.30 W.PL.S.II.3.

Karel Maca, Tomáš Spusta, Katarína Drdlíková, Martin Trunec, Daniel Drdlík, Róbert Klement

Brno University of Technology, Brno, Czech Republic, Funglass Centre of Excellence, Trenčín, SlovakiaCapsule free hot isostatic pressing as a way towards transparent structural and functional ceramics

 

11.30-12.00 BREAK
 
12.00-12.15  W.PL.S.II.4.

Elisa Torresani1, Maricruz Carrillo1,2, Eugene Olevsky1,2, Chris Haines3, Darold Martin4

1San Diego State University, San Diego, CA, USA, 2University of California San Diego, CA, USA,  3US Army DEVCOM - Army Research Laboratory, Aberdeen Proving Ground, MD, USA, 4US Army DEVCOM-Armaments Center, Picatinny Arsenal, NJ, USA

Additive manufacturing and spark plasma sintering: fabrication of powder components with cooling channels


12.15-12.30 W.PL.S.II.5. VIRTUAL PRESENTATION

Masaaki Aoki1,2, Ryousuke Aoki1, Akihiro Mochizuki2, Yoshio Murakami2, Mutsuharu Tsunoda2, Goro Yoshinari2, Maurizio Fenech3, Nobuhiko Nakano1

1Department of Electronics and Electrical Engineering, Faculty of Science and Technology, Keio University, Yokohama, Kanagawa 223-8521, Japan, 2MacDermid Alpha Electronics Solutions/  MacDermid Performance Solutions Japan, 3MacDermid Alpha Electronics Solutions / Alpha Assembly Solutions Germany GmbH

Thermal stress and deformation in SIC power chip system having Ag sintered bonding layers for advanced power conversion

 

12.30-12.45 W.PL.S.II.6. VIRTUAL PRESENTATION

Kazuma Yamashita1, Masaaki Aoki1/ 2, Goro Yoshinari2, and Nobuhiko Nakano1

Department of Electronics and Electrical Engineering, Faculty of Science and Technology, MKeio University, Yokohama, Kanagawa 223-8521, Japan, MacDermid Alpha Electronics Solutions / MacDermid Performance Solutions Japan, Hiratsuka, Kanagawa 254-0082, Japan

1Department of Electronics and Electrical Engineering, Faculty of Science and Technology, Keio University, Yokohama, Kanagawa 223-8521, Japan, 2MacDermid Alpha Electronics Solutions/  MacDermid Performance Solutions Japan, 3MacDermid Alpha Electronics Solutions / Alpha Assembly Solutions Germany GmbH

Excellent heat dissipation performance of power device structures having Ag sintered bonding layers