Download the Final Programme 

Sunday, September 1, 2019

Monday, September 2, 2019

Morning

Afternoon

Tuesday, September 3, 2019

Morning

Afternoon

Wednesday, September 4, 2019

Morning

Afternoon

Thursday, September 5, 2019

Morning

Afternoon

14⁰⁰-19⁰⁰ 
Boat-trip around Boka Kotorska Bay

POSTER SESSION III: 20⁰⁰-22⁰⁰

Villa Mimoza

YUCOMAT SYMPOSIUM C - NANOSTRUCTURED MATERIALS

Chairpersons: Ivana Dinić and Veljko Đokić

P.S.C.15.
Structural investigations of alloyed Al with TiCN nanopowder under load and tensile
Stefan Valkov¹, Rumiana Lazarova², Julia Goschkova³, Gizo Bokuchava³, Peter Petrov^1
1E. Djakov Institute of electronics, Bulgarian Academy of Sciences, 72 Tzarigradsko chaussee, 1784 Sofia, Bulgaria; ²Institute of Metal Science, Equipment and Technologies with Hydro and Aerodynamics center, Bulgarian Academy of Sciences, 67 Shipchenski Prohod blvd., 1574 Sofia, Bulgaria; ³Frank Laboratory of Neutron Physics, Joint Institute for Nuclear Research, 6 Joliot-Curie Str., 141980 Dubna, Russia
P.S.C.16.
Cubic silver nanoparticles fixed on TiO₂ nanotubes as a simple and efficient substrates for surface enhanced Raman scattering
Robert Ambroziak¹, Marcin Hołdyński², Tomasz Płociński³, Marcin Pisarek², Andrzej Kudelski^1
1Faculty of Chemistry, University of Warsaw, Pasteur Str. 1, 02-093 Warsaw, Poland; ²Institute of Physical Chemistry Polish Academy of Sciences, Kasprzaka Str. 44/52, 01-224 Warsaw, Poland; ³Faculty of Materials Science and Engineering, Warsaw University of Technology, Woloska 141, 02-507, Warsaw, Poland
P.S.C.17.
Formation of borides, silicides and boride-silicide powder composite materials by mechanical alloying
Marina Vasylkivska, Izabella Timofeeva
Frantsevich Institute for Problems of Materials Science of National Academy of Sciences of Ukraine, Kiev, Ukraine
P.S.C. 18.
Preparation of polylactide-kaolinite nanocomposite
András Kovács¹, Éva Makó¹, Norbert Miskolczi^2
1Institute of Materials Engineering, University of Pannonia, Veszprém, Hungary; ²Institute of Chemical and Process Engineering, University of Pannonia, Veszprém, Hungary

YUCOMAT SYMPOSIUM D - ECO-MATERIALS AND ECO-TECHNOLOGIES

P.S.D.1.
Identification and evaluation of changes and migration mechanisms of petroleum pollutant in the environment using the alkane fraction biological markers (river Vrbas, Bosnia and Herzegovina)
Ivan Samelak¹, Milica Balaban¹, Mališa Antić², Tatjana Šolević-Knudsen³, Branimir Jovančićević^4
1Faculty of Natural Sciences and Mathematics, University of Banja Luka, Mladena Stojanovića 2, 78000 Banja Luka, Bosnia and Herzegovina; ²University in Belgrade, Faculty of Agriculture, Nemanjina 6, 11080, Belgrade, Serbia; ³Center of Chemistry, Institute of Chemistry, Technology and Metallurgy, University of Belgrade, Njegoševa 12, 11001 Belgrade, Serbia; ⁴University of Belgrade, Faculty of Chemistry, Studentski trg 12-16. 11001 Belgrade, Serbia
P.S.D.2.
Potential application of activated carbonaceous materials for removing residual contaminants from complex biochemical and pharmacological mixtures
Branka Kaluđerović, Đuro Čokeša, Jelena Hranisavljević, Vesna Mandušić
INN Vinča, University of Belgrade, INN Vinča, P.O.Box 522, 11001 Belgrade, Serbia
P.S.D.3.
The influence of modification and the particle size of the montmorillonite on the hydrolytic stability of urea-formaldehyde composite
Suzana Samaržija-Jovanović¹, Branka Petković¹,Tijana Jovanović², Vojislav  Jovanović¹, Gordana Marković³, Milena  Marinović-Cincović⁴, Jaroslava  Budinski-Simendić^5
1University in Priština - Kosovska Mitrovica, Faculty of Sciences, 38220 Kosovska Mitrovica, Serbia, ²University of Niš, Faculty of  Sciences and Mathematics, 18106 Niš, Serbia, ³Tigar AD, 18300 Pirot, Serbia, ⁴University of Belgrade, Institute of Nuclear Science Vinča, 11000 Belgrade, Serbia, ⁵University of Novi Sad, Faculty of Technology, 21000 Novi Sad, Serbia
P.S.D.4.
Group chase and escape in the presence of obstacles
Julija R. Šćepanović, Aleksandar Karač, Zorica M. Jakšić, Ljuba Budinski-Petković, Slobodan B. Vrhovac
Scientific Computing Laboratory, Center for the Study of Complex Systems, Institute of Physics Belgrade, University of Belgrade, Belgrade, Serbia
P.S.D.5.
Regulation of lipid production of Torulaspora globose yeast, cultivated in the medium with ethanol as a carbon source
Nadezda N. Stepanova¹, Grigorii I. Morgunov², and Svetlana V. Kamzolova^1
1G.K. Skryabin Institute of Biochemistry and Physiology of Microorganisms, Federal Research Center "Pushchino Center for Biological Research of the Russian Academy of Sciences”, Pushchino, Moscow region, 142290 Russia; ²Peoples’ Friendship University of Russia (RUDN University), Moscow, 117198 Russia

YUCOMAT SYMPOSIUM E – BIOMATERIALS

P.S.E.1.
Development of a 3D system for cancer cell studies
Jasmina Stojkovska^1,2, Milena Milivojević³, Milena Stevanović^3,4,5, Bojana Obradović^1
1Faculty of Technology and Metallurgy, University of Belgrade, Belgrade, Serbia; ²Innovation Center of the Faculty of Technology and Metallurgy, Belgrade, Serbia; ³Institute of Molecular Genetics and Genetic Engineering, University of Belgrade, Belgrade, Serbia; ⁴Faculty of Biology, University of Belgrade, Belgrade, Serbia; ⁵Serbian Academy of Sciences and Arts, Belgrade, Serbia
P.S.E.2.
From wood to bone: how to convert wood structures into biomimetic hydroxyapatite scaffolds
Miklós Jakab, Margit Enisz-Bódogh
University of Pannonia, Institute of Materials Engineering, Veszprém, Hungary
P.S.E.3.
Functionalization and biomimetics of insect photonic structures
Danica Pavlović¹, Dejan Pantelić¹, Branislav Salatić¹, Dušan Grujić¹, Svetlana Savić Šević¹, Ljubiša Tomić², Goran Dikić³, Branislav Jelenković^1
1Institute of Physics Belgrade, University of Belgrade Pregrevica 118, 11080 Zemun, Belgrade, Serbia; ²Military Technical Institute, Ratka Resanovića 1, 11000 Belgrade, Serbia; ³The School of Electrical and Computer Engineering of Applied Studies, Vojvode Stepe 283, 11010 Belgrade, Serbia
P.S.E.4.
Evaluation of colour modifications and surface morphology of dental composites
Marioara Moldovan¹, Doina Prodan¹, Codruta Sarosi¹, George Popescu², Amalia-Ionela Mazilu (Moldovan)^2*, Violeta Popescu^2
1Babes Bolyai University, “Raluca Ripan“ Chemistry Research Institute, Department of Polymer Composites, Cluj-Napoca, Romania; ²Physics and Chemistry Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania  
P.S.E.5.
The morphology studies of different nanohybrid dental composites
Codruta Sarosi¹, Ioan Petean², Doina Prodan¹, Cristina Prejmerean¹, Marioara Moldovan^1
1Babes Bolyai University, Institute of Chemistry Raluca Ripan, Cluj-Napoca, Romania; ²Babes Bolyai University, Faculty of Chemistry and Chemical Engineering, Cluj-Napoca, Romania
P.S.E.6.
The identification of branched-chain amino acids and the testing of the antibacterial effect of whey and soy protein powders
Violeta Popescu¹, Marioara Moldovan², Codruța Sarosi², Mihaela Vlassa², George Liviu Popescu¹, Diana Elena David¹, Ileana Cojocaru³, Doina Prodan^2
1Physics and Chemistry Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania; ²Babeş Bolyai University, “Raluca Ripan“ Chemistry Research Institute, Department of Polymer Composites, Cluj-Napoca, Romania; ³University of Craiova, Craiova, Romania
P.S.E.7.
Comparison of the carbon content in various biomasses based on calorimetric tests
Hadi Waisi^1,2, Vladimir Dodevski³, Bojan Janković¹, Marija Janković⁴, Nikola Živković⁵, Blažo Lalević⁶, Miloš Marinković^7
1Laboratory of Physical Chemistry, University of Belgrade, Institute of Nuclear Sciences “Vinča”, Belgrade, Serbia; ²Faculty for Ecology and Environmental Protection, University Union-Nikola Tesla, Cara Dušana 62-64, 11000 Belgrade, Serbia; ³Laboratory for Materials Sciences, University of Belgrade, Institute of Nuclear Sciences “Vinča”, Belgrade, Serbia; ⁴Radiation and Environmental Protection Department, Institute of Nuclear Sciences “Vinča”, University of Belgrade, Belgrade, Serbia; ⁵Laboratory for Thermal Engineering and Energy, Institute of Nuclear Sciences “Vinča”, University of Belgrade, Belgrade, Serbia, ⁶Department for Environmental Microbiology, Faculty of Agriculture, University of Belgrade, Belgrade, Serbia; ⁷Department of Chemistry, Faculty of Science and Mathematics, University of Niš, Niš, Serbia

P.S.E.8.
Hybrid bio-nanoentities with potential applications in biomedical field
Yulia Gorshkova¹, Marcela Elisabeta Barbinta-Patrascu², Gizo Bokuchava¹ , Nicoleta Badea³, Camelia Ungureanu³, Andrada Lazea-Stoyanova⁴, Angela Vlad⁴, Vitaly Turchenko¹, Alexander Zhigunov⁵, Ewa Juszynska-Galazka^6
1Joint Institute for Nuclear Research, Frank Laboratory of Neutron Physics, Dubna, Russia; ²University of Bucharest, Faculty of Physics, Department of Electricity, Solid-State Physics and Biophysics, Bucharest-Magurele, Romania; ³University “Politehnica” of Bucharest, Faculty of Applied Chemistry and Materials Science, General Chemistry Department, Bucharest, Romania; ⁴National Institute for Lasers, Plasma and Radiation Physics, Bucharest-Magurele, Romania; ⁵Institute of Macromolecular Chemistry AS CR, Prague, Czech Republic; ⁶Institute of Nuclear Physics, Polish Academy of Sciences, Krakow, Poland

WRTCS 2019

P.S.F.1.
Sintering heating and cooling rates as a method of modifying electrical properties of BiFeO₃ ceramics
Nikola Ilić¹, Jelena Bobić¹, Mirjana Vijatović Petrović¹, Adis Džunuzović¹, Biljana Stojanović^2
1Institute for Multidisciplinary Research, University of Belgrade, Belgrade, Serbia; ²Academy of Engineering Sciences of Serbia, Belgrade, Serbia
P.S.F.2.
Nickel ferrite/zinc ferrite nanopowder with core/shell structure: magnetic properties and sinterability
Ivan Stijepović, Marija Milanović, Andrea Nesterović, Jelena Vukmirović, Vladimir Srdić
University of Novi Sad, Faculty of Technology, Department of Materials Engineering, Novi Sad, Serbia
P.S.F.3.
Sintering of scaffolds based on doped hydroxyapatite powders
Željko Radovanović¹, Đorđe Veljović², Rada Petrović², Đorđe Janaćković^2
1University of Belgrade, Innovation Center of the Faculty of Technology and Metallurgy, Belgrade, Serbia; ²University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia
P.S.F.4.
Two-step sintered monophasic HAp dental inserts as materials for dentin replacement
Giuma Ayoub¹, Maja Ležaja Zebić², Vesna Miletić², Rada Petrović¹, Đorđe Veljović¹, Đorđe Janaćković^1
1University of Belgrade, Faculty of Technology and Metallurgy, Department of Inorganic Chemical Technology, Karnegijeva 4, 11120 Belgrade, Serbia; ²University of Belgrade, School of Dental Medicine, DentalNet Research Group, Rankeova 4, Belgrade, Serbia
P.S.F.5.
Surface-selective laser sintering of ultrafine polymer powders. A new approach to high resolution three-dimensional printing
Svetlana A. Minaeva¹, Maria A. Syachina¹, Anton V. Mironov¹, Nikita V. Minaev¹, Eduards Krumins², Steven M. Howdle², Vladimir K. Popov^1
1FSRC “Crystallography and Photonics“ RAS, Troitsk, Moscow, Russia; ²School of Chemistry, University of Nottingham University Park, Nottingham, United Kingdom
P.S.F.6.
Influence of 3D-printing additive to freeze casting structure
Yueh-Ying Chou¹, Po-Yu Chen¹, Vojislav V. Mitić^2,3, Goran Lazović^4
1National Tsing Hua University, Taiwan; ²Institute of Technical Sciences of SASA, Belgrade, Serbia; ³Faculty of Electronic Engineering, University of Nis, Serbia; ⁴Faculty of Mechanical Engineering University of Belgrade, Serbia
P.S.F.7.
Resintering effect on high gamma phase content cemented carbide
Marco Mendez, Luis Garcia
Hyperion Materials & Technologies, Ind. Roca - C/ Verneda s/n, Martorelles, Barcelona 08107, Spain
P.S.E.8.
Hybrid bio-nanoentities with potential applications in biomedical field
Yulia Gorshkova¹, Marcela Elisabeta Barbinta-Patrascu², Gizo Bokuchava¹, Nicoleta Badea³, Camelia Ungureanu³, Andrada Lazea-Stoyanova⁴, Angela Vlad⁴, Vitaly Turchenko¹, Alexander Zhigunov⁵, Ewa Juszynska-Galazka^6
1Joint Institute for Nuclear Research, Frank Laboratory of Neutron Physics, Dubna, Russia; ²University of Bucharest, Faculty of Physics, Department of Electricity, Solid-State Physics and Biophysics, Bucharest-Magurele, Romania; ³University “Politehnica” of Bucharest, Faculty of Applied Chemistry and Materials Science, General Chemistry Department, Bucharest, Romania; ⁴National Institute for Lasers, Plasma and Radiation Physics, Bucharest-Magurele, Romania; ⁵Institute of Macromolecular Chemistry AS CR, Prague, Czech Republic; ⁶Institute of Nuclear Physics, Polish Academy of Sciences, Krakow, Poland

Friday, September 6, 2019

Morning