Materials Research Society of Serbia - Tuesday, August 30, 2022

YUCOMAT 2022 & XII WRTCS - Scientific Programme

Virtual Lectures and Presentations are HERE
Book of Abstracts

Tuesday, August 30, 2022

Morning

National Restaurant Jadranka Terrace

First YUCOMAT Poster Session

Competition for the best Oral presentation of young researchers

Session I: 08.30-10.00

Chairpersons: Bojana Obradović and Zoran Jovanović

YUCOMAT SYMPOSIUM A:
ADVANCED METHODS IN SYNTHESIS AND PROCESSING OF MATERIALS

P.S.I.A.1. Silica-based organo-inorganic hybrid materials with carboxyl groups for water purification

Viktoriia Kyshkarova^1,2, Zbigniew Wzorek³, Anna K. Nowak³, Inna Melnyk¹

¹Institute of Geotechnics, Slovak Academy of Sciences, Košice, Slovakia, ²Technical University of Košice, Faculty of Materials, Metallurgy and Recycling, Košice, Slovakia, ³Cracow University of Technology, Krakow, Poland

P.S.A.2. Mg/Fe layered double hydroxides-based adsorbents for removal of inorganic toxicants commonly found in aquatic environments

Tetiana Hubetska, Victor Demchenko, Natalia Kobylinska

A.V. Dymansky Institute of Colloid and Water Chemistry NAS of Ukraine, Kyiv, Ukraine

P.S.I.A.3. Supercritical CO₂assisted deposition of MAPbBr₃perovskite onto TiO₂nanotubes

Milica Stefanović¹, Ivana Lukić², Jelena Vujančević³, Rada Petrović², Đorđe Janaćković²

¹Innovation Center of Faculty of Technology and Metallurgy, Ltd, Belgrade, Serbia, ²University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia, ³Institute of Technical Sciences of SASA, 11000, Belgrade, Serbia

YUCOMAT SYMPOSIUM B:

ADVANCED MATERIALS FOR HIGH-TECHNOLOGY APPLICATION

P.S.I.B.1. Crystal structure prediction and investigation of mechanical properties of the SiB₆ compound through ab initio calculations

Tamara Škundrić^1,2, Dejan Zagorac^1,2, Aleksandra Zarubica³, Jelena Zagorac^1,2, Milan Pejić ^1,2, Dušica Jovanović ^2,3, Peter Tatarko⁴, Branko Matović^1,2

¹Materials Science Laboratory, Institute of Nuclear Sciences “Vinča”, University of Belgrade, Belgrade, Serbia,,²Center for synthesis, processing and characterization of materials for application in the extreme conditions “CextremeLab”, Belgrade, Serbia, ³Department of Chemistry, Faculty of Sciences and Mathematics, University of Niš, Niš, Serbia,⁴Institute of Inorganic Chemistry, Slovak Academy of Sciences, 845 36 Bratislava, Slovakia

P.S.I.B.2. The influence of high-temperature annealing on the evolution of precipitates in Inconel 625 superalloy additively manufactured by laser powder bed fusion

Sylwia Staroń, Kewin Gola, Beata Dubiel

AGH University of Science and Technology, Faculty of Metals Engineering and Industrial Computer Science, Al. A. Mickiewicza 30, 30-059 Kraków, Poland

P.S.I.B.3. The kinetics of g'' and d phase precipitation during the high temperature annealing of Inconel 625 additively manufactured by laser powder bed fusion

Hubert Pasiowiec^a, Beata Dubiel^b, Kewin Gola^c

AGH University of Science and Technology, Faculty of Metals Engineering and Industrial Computer Science, Al. A. Mickiewicza 30, 30-059 Kraków, Poland

P.S.I.B.4. Cellulose nanocrystals with different surface functionalities as outstanding scaffolds for supercapacitor materials

Gordana Backović, Wim Thielemans

Sustainable Materials Lab, Department of Chemical Engineering, KU Leuven, campus Kulak Kortrijk, Etienne Sabbelaan 53, 8500 Kortrijk, Belgium

P.S.I.B.5. A hierarchically porous all-polysaccharide composite anode for an asymmetric supercapacitor

Julien Lemieux, Wim Thielemans

Sustainable Materials Lab, Department of Chemical Engineering, KU Leuven, campus Kulak Kortrijk, Etienne Sabbelaan 53, 8500 Kortrijk, Belgium

P.S.I.B.6. Aqueous multivalent-ion chemistry of vanadium oxides: Novelties and Challenges

Milica J. Vujković

University of Belgrade-Faculty of Physical Chemistry, Studentski trg 12-16, 11000 Belgrade, Serbia

P.S.I.B.7. pH-triggered sol-gel synthesis of Na₄Fe₃(PO₄)₂P₂O₇cathode material

Aleksandra Gezović¹, Miloš Milović², Danica Bajuk-Bogdanović³, Veselinka Grudić¹, Slavko Mentus^3,4, Milica Vujković³

¹University of Montenegro, Faculty of Metallurgy and Technology, Cetinjski put bb, Podgorica, Montenegro, ²Institute of Technical Sciences of the Serbian Academy of Sciences and Arts, Knez Mihajlova 35/IV, 11158 Belgrade, Serbia, ³University of Belgrade, Faculty of Physical Chemistry, Studentski Trg 12–16, Belgrade, Serbia, ⁴Serbian Academy of Sciences and Arts, Knez Mihajlova 35, Belgrade, Serbia

P.S.I.B.8. Experimental evaluation of mechanical anisotropic material behaviour of carbon reinforced PET-G material

Milan Janković¹, A. Petrović¹, V. Lojpur², S. Dikić³, M. Miloš¹, I. Balać¹

¹Faculty of Mechanical Engineering, University of Belgrade, Kraljice Marije 16, 11000 Belgrade, Serbia, ²Vinča Institute of Nuclear Sciences, University of Belgrade, Mike Pertovića Alasa 12-14, Vinča, 11000 Belgrade, Serbia, ³Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11000 Belgrade, Serbia

P.S.I.B.9. Fluidising low temperature thermochemical energy storage materials: degredation and damage assesment

Louis F. Marie, Tadhg S. O'Donovan

Heriot-Watt University, Edinburgh, EH14 4AS, United Kingdom

YUCOMAT SYMPOSIUM C:

NANOSTRUCTURED MATERIALS

P.S.I.C.1. Investigation of 3D printing and thermomechanical properties of free-radical resin filled with TiO₂ nanoparticles

Juraj Svatík, Martina Korčušková, Martina Štaffová, Veronika Sevriugina, František Ondreáš, Petr Lepcio

Central European Institute of Technology, Brno University of Technology, Purkyňova 656/123, 61200 Brno, Czech Republic

P.S.I.C.2. Thiacarbocyanine dye TCC: features of J-aggregation in aqueous solutions and polymer films

Polina Pisklova^1,2, Iryna Ropakova¹, Svitlana Yefimova¹, Alexander Sorokin¹

¹Institute for Scintillation Materials of NAS of Ukraine, Kharkiv, Ukraine, ²Institute of Physics, University of Rostock, Rostock, Germany

P.S.I.C.3. Influence of physical cross-linking by montmorillonite on structure and thermostability of hydrogel composites based on polyacrylamide

Olena Siryk¹, Katarzyna Szewczuk-Karpisz², Olena Goncharuk¹, Yurii Samchenko¹, Dariusz Sternik³

¹Ovcharenko Institute of Biocolloidal Chemistry National Academy of Sciences of Ukraine, Akademika Vernadskogo Blvd. 42, 03680, Kyiv, Ukraine, ²Institute of Agrophysics, Polish Academy of Sciences, Doświadczalna 4, 20-290 Lublin, Poland, ³Maria Curie-Sklodowska University, M.C. Sklodowska Sq.3, 20031 Lublin, Poland

P.S.I.C.4. Effect of polymer molecular weight on thermal and surface structural characteristics of MWCNTs/PDMS nanocomposites

Iryna Sulym¹, Mykola Borysenko¹, Yuriy Sementsov¹, Dariusz Sternik², Anna Derylo-Marczewska²

¹Chuiko Institute of Surface Chemistry of NASU, 17 General Naumov Str., 03164 Kyiv, Ukraine, ²Maria Curie-Skłodowska University, pl. Maria Curie-Skłodowskiej 3, 20‑031 Lublin, Poland

YUCOMAT SYMPOSIUM D:

ECO-MATERIALS AND ECO-TECHNOLOGIES

P.S.I.D.1. Waterborne polyurethanes based on poly(dimethylsiloxane)

Ivan Stefanović¹, Jasna Džunuzović¹, Enis Džunuzović² and Carla Marega³

¹Institute of Chemistry, Technology and Metallurgy, Department of Chemistry, University of Belgrade, Njegoševa 12, 11000 Belgrade, Serbia, ²Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11000 Belgrade, Serbia, ³Department of Chemical Sciences, University of Padova, via Marzolo 1, 35131 Padova, Italy

P.S.I.D.2. Structural characterization of geopolymers with the addition of egg shell

Sanja Knežević¹, Marija Ivanović¹, Miljana Mirković¹, Ljiljana Kljajević¹, Miloš Nenadović², Vladimir Pavlović³ and Snežana Nenadović¹

¹Department Department of Materials, Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia,University of Belgrade, Mike Petrovića Alasa 12-14, Vinča, 11000 Belgrade, Serbia, ²Department of Atomics Physics, Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Mike Petrovića Alasa 12-14, Vinča, 11000 Belgrade, Serbia, ³Institute of Technical Sciences of the Serbian Academy of Sciences and Arts, University of Belgrade, Belgrade, Serbia

P.S.I.D.3. Sequential extractions and leaching tests as methods for characterization of mine tailings for the purpose of their probable application in eco-friendly geopolymers

Lyudmila Angelova, Darya Ilieva, Temenuzhka Radoykova, Andriana Surleva

University fo Chemical technology and Metallurgy,8 „St. Kl. Ohridski” blvd., 1756 Sofia, Bulgaria

P.S.I.D.4. Obtaining and characterising Cu-infused antimicrobial films formed from regenerated cellulose-CaCO₃ composite

Aleksandra Ivanovska¹, Nemanja Barac¹, Vesna Radojević², Petar Uskoković², Đorđe Janaćković^1,2, Ernest Barcelo^3,4, Patrick Gane^2,4, Mirjana Kostić¹

¹University of Belgrade, Innovation Center of the Faculty of Technology and Metallurgy in Belgrade Ltd., Karnegijeva 4, 11000 Belgrade, Serbia, ²University of Belgrade, Faculty of Technology and Metallurgy, Karnegijeva 4, 11000 Belgrade, Serbia, ³Omya International AG, Baslerstrasse 42, 4665 Oftringen, Switzerland, ⁴Aalto University, Department of Bioproducts and Biosystems, School of Chemical Engineering, 00076 Aalto, Helsinki, Finland

P.S.I.D.5. Comparative study of biomass-derived carbon interfacial processes in Aluminum-based and conventional acidic electrolyte

Jana Mišurović¹, Aleksandra Gezović¹, Jugoslav Krstić², Branislav Milovanović³, Veselinka Grudić¹, Slavko Mentus³, Milica Vujković³

¹Faculty of Metallurgy and Technology, University of Montenegro, Cetinjski put bb, 81000 Podgorica, Montenegro, ²Institute of Chemistry, Technology and Metallurgy, University of Belgrade, Njegoševa 12, Belgrade, Serbia, ³Faculty of Physical Chemistry, University of Belgrade, Studentski trg 12–16, 11158 Belgrade, Serbia

YUCOMAT SYMPOSIUM E:

BIOMATERIALS

P.S.I.E.1. Laser-induced chemical and mophological changes of the titanium alloy surface under different irradiation parameters

Slađana Laketić¹, Marko Rakin², Miloš Momčilović¹, Jovan Ciganović¹, Đorđe Veljović², Ivana Cvijović-Alagić¹

¹Institute of Nuclear Sciences „Vinča“, University of Belgrade, P.O. Box 522, 11001 Belgrade, Serbia; ²Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11120 Belgrade, Serbia

P.S.I E.2. Search for "needles" of hydroxyapatite in the "haystack" of ovarian cancer

Ruslana Chyzhma, Roman Moskalenko

Sumy State University, Sumy, Ukraine

P.S.I.E.3. The role of oxalate nanocrystalline for the differential diagnostics of the breast pathology

Olena Kolomiiets¹, Artem Piddubny ^1,2, Serhey Danilchenko³, Roman Moskalenko^1,2

¹Department of Pathology, Sumy State University, Sumy, Ukraine, ²Ukrainian-Swedish Research center SUMEYA, Sumy State University, Sumy, Ukraine, ³Institute of Applied Physics, NAS of Ukraine, Sumy, Ukraine

P.S.I.E.4. Optimisation of a 3D in vitro model for osteosarcoma cell cultivation

Ivana Banićević¹, Jelena Petrović², Milena Milivojević³, Milena Stevanović^3,4,5, Radmila Jankovic⁶, Jasmina Stojkovska^1,2, Bojana Obradović¹

¹University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia, ² Innovation Center of the Faculty of Technology and Metallurgy, Belgrade, Serbia, ³University of Belgrade, Institute of Molecular Genetics and Genetic Engineering, Belgrade, Serbia, ⁴University of Belgrade, Faculty of Biology, Belgrade, Serbia, ⁵ Serbian Academy of Sciences and Arts, Belgrade, Serbia, ⁶University of Belgrade, School of Medicine, Belgrade, Serbia

P.S.I.E.5. Development of a 3D in vitro model based on alginate microfibers with immobilized cancer cells for cancer research and anticancer drug testing

Jelena Petrovic^1,2, Ivana Banicevic¹, Jasmina Stojkovska^1,2, Miodrag Dragoj³, Milica Pesic³, Milena Milivojevic⁴, Milena Stevanovic^4,5,6, Bojana Obradovic¹

¹University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia, ²Innovation Center of the Faculty of Technology and Metallurgy, Belgrade, Serbia, ³University of Belgrade, Institute for Biological Research “Sinisa Stankovic” - National Institute of the Republic of Serbia, Belgrade, Serbia, ⁴University of Belgrade, Institute of Molecular Genetics and Genetic Engineering, Belgrade, Serbia, ⁵University of Belgrade, Faculty of Biology, Belgrade, Serbia, ⁶Serbian Academy of Sciences and Arts, Belgrade, Serbia

P.S.I.E.6. PCL-MXene composite electrospun membrane for nerve regeneration: structural and biological assessment

Kateryna Diedkova¹, Yevhen Samokhin¹, Veronika Zahorodna², Ivan Baginskiy², Vitalii Balitskyi², Oleksiy Gogotsi², Viktoriia Korniienko¹

¹Sumy State University, 31 Sanatorna St, Sumy 40007, Ukraine, ²Materials Research Centre, 3 Krzhizhanovskogo St, Kyiv 03680, Ukraine

P.S.I.E.7. 3D printed calcium phosphate cement scaffolds loaded with liposomal antibacterial enzymes for the prevention of osteomyelitis

Zuzana Kadlecová¹, Kristýna Hlináková¹, Lucy Vojtová¹

¹Central European Research Institute, Brno University of Technology, Brno, Czech Republic

P.S.I.E.8. Hydrogel dressings for phage therapy of chronic wounds

E. Černá¹, L. Vacek², F. Růžička², B. Lipový³, M. Benešík⁴, T. Botka⁴, R. Pantůček⁴, L. Vojtová¹

¹Central European Institute of Technology, Brno University of Technology, Brno, Czech Republic, ²Department of Microbiology, St. Anne’s University Hospital Brno and Faculty of Medicine, Masaryk University, Brno, Czech Republic, ³Department of Burns and Plastic Surgery, University Hospital Brno and Faculty of medicine, Masaryk University, Brno, Czech Republic, ⁴Section of Genetics and Molecular Biology, Faculty of Science, Masaryk University, Brno, Czech Republic

P.S.I.E.9. Biomechanical DMA characterization of calcium and barium alginate hydrogel scaffolds

Alexandra Zühlke ¹, Ivana Banicevic ², Bojana Obradovic ², Michael Gasik ¹

¹Aalto University Foundation, Espoo, Finland. ²University of Belgrade, Belgrade, Serbia

P.S.I.E.10. Hydroxyl radical scavenging activity of titanium oxide nanocrystals

Pavel Maksimchuk¹, Kateryna Hubenko¹, Vladyslav Seminko¹, Andrey Onishchenko², Iryna Bespalova¹, Anatolii Onishchenko³, Volodymyr Prokopiuk³, Anton Tkachenko³, Svetlana Yefimova¹

¹Department of Nanostructured Materials, Institute for Scintillation Materials NAS of Ukraine, Kharkiv, Ukraine, ²Department of Physics, Kharkiv National University of Radio Electronics, Kharkiv, Ukraine, ³Research Institute of Experimental and Clinical Medicine, Kharkiv National Medical University, Kharkiv, Ukraine

P.S.I.E.11* Magnesium alloy with yttrium, gadolinium and calcium alloying elements designed for aviation applications

Jitka Stráská¹, Stanislav Šašek¹, Peter Minárik¹, Robert Král¹, Jozef Veselý¹, Jiří Kubásek²

¹Charles University, Faculty of Mathematics and Physics, Department of Physics of Materials, Ke Karlovu 5, 121 16 Praha, Czech Republic, ²University of Chemistry and Technology, Faculty of Chemical Technology, Department of Metals and Corrosion Engineering, Technická 5, 166 28 Praha, Czech Republic

P.S.I.E.11* Resonance ultrasound spectroscopy measurements of elastic modulus of biomedical Ti-based alloys prepared by SPS

Josef Stráský^a, Jiří Kozlík^a, Dalibor Preisler^a, Hanuš Seiner^b, Michaela Janovská^b, Martin Koller^b, Miloš Janeček^a

^aDepartment of Physics of Materials, Faculty of Mathematics and Physics, Charles University, Czechia, ^bInstitute of Thermomechanics, Czech Academy of Sciences, Czechia

*They do not participate in the Competition for the best Poster Performance of young researchers

10.00-10.30 Break

Main Conference Hall

First WRTCS Plenary Session

Session I: 10.30-14.00

Chairpersons: Eugene A. Olevsky and Suk-Joong L. Kang

10.30-11.00 W.PL.S.I.1.

Eugene A. Olevsky

San Diego State University

Sintering assisted additive manufacturing

11.00-11.30 W.PL.S.I.2.

Rajendra Bordia, Fei Peng

Materials Science and Engineering, Clemson University,Clemson, SC 29634 USE

Challenges and opportunities for machine learning approaches for sintering and microstructure development

11.30-12.00 W.PL.S.I.3.

Olivier Guillon

Institute of Energy and Climate Research: Materials Synthesis and Processing Forschungszentrum Jülich GmbH & RWTH Aachen University, Germany

Electric field assisted sintering of oxide ceramics: fields matter!

12.00-12.30 Break

12.30-13.00 W.PL.S.I.4.

Hamish Fraser

Center for the Accelerated maturation of Materials, Department of Materials Science and Engineering, The Ohio State University, Columbus, OH, USA

Enhancing powder metallurgy processing using advanced microstructural characterization and physical metallurgy

13.00-13.30 W.PL.S.I.5.

Sotiris E. Pratsinis

Particle Technology Laboratory, Institute of Process Engineering, Swiss Federal Institute of Technology (ETH Zurich), CH-8092 Zurich, Switzerland

The role of sintering in process design for aerosol synthesis of nanostructured materials

11.30-12.00 W.PL.S.I.6.

Suk-Joong L. Kang

KAIST, Daejeon, Korea

Grain growth: the mixed control mechanism of atom transport

14.00-15.00 Break