Chairpersons: Gordana Vunjak-Novakovic and Robert Sinclair

10¹⁵-10⁴⁵

Stimuli-responsive smart soft materials
Takuzo Aida
The University of Tokyo and RIKEN Center for Emergent Matter Science

10⁴⁵-11¹⁵

Therapeutic biomaterial devices for controlled drug release in ocular and cardiac disease treatment
Freddy Boey, Subbu Venkatraman
Nanyang Technological University, School of Materials Science and Engineering, Singapur

11¹⁵-11⁴⁵

Iron oxide nanoparticles for medical application: still a challenging task
Heinrich Hofmann
Powder Technology Laboratory, Institute of Materials, Ecole Polytechnique Federale de Lausanne, Switzerland

Break: 11⁴⁵-12¹⁵

Chairmen: Takuzo Aida and Velimir R. Radmilović

12¹⁵-12⁴⁵

In situ electron microscopy of energy-related thin film reactions
Robert Sinclair, Sang Chul Lee and Ai Leen Koh
Department of Materials Science and Engineering and Stanford Nano Shared Facilities, Stanford University

12⁴⁵-13¹⁵

Lithium and scandium trialuminides embedded in solid matrix
Velimir R. Radmilović
Sebian Academy of Sciences and Arts, Knez Mihailova 35, 11000, Beograd, Serbia

Chairpersons: Kwang-Ho Kim, Robert Sinclair, Danilo Suvorov and Margarethe Hofmann

15⁰⁰-15³⁰

Materials research in Europe – a new concept needed?
Margarethe Hofmann-Amtenbrink¹, Alessandra Hool^2
1Past President of FEMS, CEO MatSearch and Foundation of Rare Metals, ESM, Pully, Swiss, ²MatSearch and Foundation of Rare Metals, ESM, Pully, Swiss

15³⁰-16⁰⁰

Hybrid-interface materials
Kwang Ho Kim^1,2
1Global Frontier R&D Center for Hybrid Interface Materials, Korea
²School of Materials Science and Engineering, Pusan National University, Korea

16⁰⁰-16¹⁵

Advanced nanotechnology based on the directed self-assembly of block copolymers for device applications
Woon Ik Park
Electronic Materials & Component R&D Center, Korea Institute of Ceramic Engineering & Technology (KICET) 101 Soho-ro, Jinju 52851, Republic of Korea

16¹⁵-16³⁰

Virus based novel colorimetric sensor for cancer cell detection

Suck Won Hong¹, Jin-Woo Oh^2
1Department of Cogno-Mechatronics Engineering, Pusan National University, Busan 46241, Republic of Korea
²Department of Nanoenergy Engineering, Pusan National University, Busan 46241, Republic of Korea

16³⁰-16⁴⁵

Organic-inorganic hybride thin films using atomic/molecular layer deposition for flexible electronic applications
Jin-Seong Park
Division of Materials Science and Engineering, Hanyang University, Seoul, Republic of Korea

16⁴⁵-17⁰⁰

Ultrathin ALD interfacial layer for improved materials properties
Zhixin Wan, Woo-Jae Lee, Kwang-Ho Kim, and Se-Hun Kwon
School of Materials Science and Engineering, Pusan National University, Republic of Korea

Break: 17⁰⁰-17³⁰

Chairmen: Kwang-Ho Kim, Robert Sinclair, Danilo Suvorov and Margarethe Hofmann

17³⁰-18⁰⁰

3-Dimensional hybrid nanostructures: Novel fabrication strategies and applications
Yeon Sik Jung
KAIST- Korean Institute for Science and Technology, Seoul, Korea

18⁰⁰-18¹⁵

Hybrid materials/device enabling high energy and power densities along with robust cycle life
Jeung Ku Kang, Hyung Mo Jeong, Il-Woo Ock, Jong Ho Weon
Department of Materials Science & Engineering and Graduate School of EEWS, Daejeon, Korea

18¹⁵-18³⁰

Multi-scale computational design of active and durable materials for renewable energy systems
Byungchan Han, Joonhee Kang, Jeemin Hwang, Seunghyo Noh, Choa Kwon
Department of Chemical and Biomolecular Engineering, Yonsei University, Seoul, 03722, Korea

18³⁰-18⁴⁵

Ni₂Si silicide wire fabrication by conventional metal alloy processing
Seung Zeon Han¹, Sung Hwan Lim², Byungchan Han³ and Kwang Ho Kim^4
1Commercialization Research Division, Korea Institute of Materials Science, Changwon, Korea, ²Department of Advanced Materials Science & Engineering, Kangwon National University, Chuncheon, Korea, ³Department of Chemical and Biomolecular Engineering, Yonsei University,Seoul, Korea, ⁴School of Materials Science and Engineering, Pusan National University, Busan, Korea

18⁴⁵-19⁰⁰

Developing multi-component coatings for structural applications by a hybrid HIPIMS technique
Qimin Wang¹, Kwang Ho Kim^2
1School of Electromechanical Engineering, Guangdong University of Technology, Guangzhou, P.R. China, ²Global Frontier R&D Center for Hybrid Interface Materials, Pusan National University, Busan, South Korea

Chairmen:Eva Olsson and Hamish Fraser

08³⁰-09⁰⁰

In situ off-axis electron holography of two-dimensional transition metal dichalcogenides
Rafal E. Dunin-Borkowski¹, Florian Winkler¹, Amir H. Tavabi¹, Juri Barthel², Martial Duchamp¹, Emrah Yucelen³, Sven Borghardt⁴, Beata E. Kardynal^4
1Ernst Ruska-Centre for Microscopy and Spectroscopy with Electrons and Peter Grünberg Institute 5, Forschungszentrum Jülich, D-52425 Jülich, Germany
²Gemeinschaftslabor für Elektronenmikroskopie (GFE), RWTH Aachen University, D-52074 Aachen, Germany
³Faculty of Physics and Center for Nanointegration (CENIDE), University of Duisburg-Essen, D-48047 Duisburg, Germany
⁴Peter Grünberg Institute 9, Forschungszentrum Jülich, D-52425 Jülich, Germany

09⁰⁰-09³⁰

Real-time viewing of III-V semiconductor nanowire growth by In Situ TEM
L.R Wallenberg¹, F. Lenrick¹, M. Ek¹, D. Jacobsson¹, L. Samuelson² and K. Dick Thelander^1
1nCHREM, Inst. for Chemistry; ²Solid State Physics, Lund University, Sweden

09³⁰-10⁰⁰

Oxidation of carbon nanotubes using environmental TEM and the influence of the imaging electron beam
Ai Leen Koh¹, Emily Gidcumb², Otto Zhou^2,3 and Robert Sinclair^4
1Stanford Nano Shared Facilities, Stanford University, Stanford, CA 94305, USA
²Department of Applied Physical Sciences, University of North Carolina at Chapel Hill, Chapel Hill, NC 27599, USA
³Department of Physics and Astronomy, University of North Carolina at Chapel Hill, Chapel Hill, NC 27599, USA
⁴Department of Materials Science and Engineering, Stanford University, Stanford, CA 94305, USA

10⁰⁰-10³⁰

Electric field and thermal induced effects in nanostructured materials revealed by advanced in situ electron microscopy
Ludvig de Knoop, Hanna Nilsson, Andrew Yankovich, Norvik Voskanian, Lunjie Zeng and Eva Olsson
Department of Physics, Chalmers University of Technology, 412 96 Gothenburg, Sweden

Break: 10³⁰-11⁰⁰

Chairmen: Rafal E. Dunin-Borkowski and Gianluigi A. Botton

11⁰⁰-11³⁰

Energy loss spectroscopy at high resolution: Applications to functional oxides and nanostructures
Gianluigi A. Botton
McMaster University, Department of Materials Science and Engineering, 1280 Main Street West, Hamilton, Ontario, Canada

11³⁰-12⁰⁰

Non-planar nanostructures at atomic scale
Jordi Arbiol^1,2
1Institució Catalana de Recerca i Estudis Avançats (ICREA), 08010 Barcelona, CAT, Spain
²Catalan Institute of Nanoscience and Nanotechnology (ICN2), CSIC and The Barcelona Institute of Science and Technology, Campus UAB, Bellaterra, 08193 Barcelona, CAT, Spain

12⁰⁰-12³⁰

The art and science of spatially-resolved determinations of local composition in an aberration-corrected electron microscope
Brian Welk, Jacob Jensen, John Sosa, Dan Huber, Robert Williams, Babu Viswanathan, and Hamish L Fraser
Center for the Accelerated Maturation of Materials, Department of Materials Science and Engineering, The Ohio State University, 1305 Kinnear Road, Columbus, OH 43212, USA

Chairpersons: Satoshi Ohara and Natalia Kamanina

15⁰⁰-15¹⁵

Structural characterization of organic bulk heterojunction solar cells
Vuk V. Radmilović¹, Fei Guo², Christoph J. Brabec^2,3, Erdmann Spiecker⁴, Velimir R. Radmilović^5
1Innovation Center, Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11120 Belgrade, Serbia
²Institute of Materials for Electronics and Energy Technology (i-MEET), Friedrich-Alexander-University Erlangen- Nuremberg, Martensstrasse 7, 91058 Erlangen, Germany
³Bavarian Center for Applied Energy Research (ZAE Bayern), Haberstrasse 2a, 91058 Erlangen, Germany
⁴Center for Nanoanalysis and Electron Microscopy (CENEM), Friedrich – Alexander - University of Erlangen- Nuremberg, Cauerstrasse 6, 91058 Erlangen, Germany
⁵Serbian Academy of Sciences and Arts, Knez Mihailova 35, 11000 Belgrade, Serbia

15¹⁵-15³⁰

High-performance Ni-GDC nanocomposite anode fabricated from GDC nanocubes for low-temperature solid-oxide fuel cells
Satoshi Ohara and Kazuhiro Yamamoto
Joining and Welding Research Institute, Osaka University

15³⁰-15⁴⁵

The chemical recycling of polycarbonate using CeO2 nanocatalysts
Minori Taguchi, Takashi Naka, Toshitaka Funazukuri
Chuo University, National Institute for Materials Science

15⁴⁵-16⁰⁰
Modification of the materials properties via surface structuring
Natalia V. Kamanina
¹Vavilov State Optical Institute, Kadetskaya Liniya V.O., dom.5, korpus 2, St.- Petersburg, 199053, Russia
²Saint-Petersburg Electrotechical University (“LETI”), St. Petersburg, Russia

16⁰⁰-16¹⁵
Half Heusler thermoelectics Ti_(1-x)Fe_(1.33+x)Sb - TiCoSb
A. Tavassoli^1,2,3, A. Grytsiv^1,3,4, G. Rogl^1,3,4, V. Romaka⁵, P. Broz^6,7, E. Bauer^3,4, G. Giester⁸, M. Zehetbauer², P. Rogl^1,4
1Institute of Materials Chemistry and Research, University of Vienna, Waehringerstr. 42, A-1090 Wien, Austria
²Faculty of Physics, University of Vienna, Boltzmanngasse 5, A-1090 Wien, Austria
³Institute of Solid State Physics, Vienna University of Technology, Wiedner Hauptstr., 8-10, A-1040 Wien, Austria, 4Christian Doppler Laboratory for Thermoelectricity, Wien, Austria, ⁵Department of Materials Science and Engineering, Lviv Polytechnic National University, Ukraine, ⁶Masaryk University, Faculty of Science, Department of Chemistry, Kotlarska 2, 611 37, Brno, Czech Republic
⁷Masaryk University, Central European Institute of Technology, CEITEC, Kamenice 753/5, Brno 62500, Czech Republic
⁸Institute of Mineralogy and Crystallography, University of Vienna, Althanstraße 14, A-1090 Vienna, Austria

16¹⁵-16³⁰

Shape directing agents for controlling the morphology of anisotropic iron oxide nanoparticles
Ana Mrakovic¹, Gurvinder Singh², Frode Seland², Erzsébet Illés¹, Nikola Knezevic¹, Vladan Kusigerski¹, Sanja Vranjes-Djuric¹, Vojislav Spasojevic¹ and Davide Peddis^1,3
1The Vinča Institute of Nuclear Sciences, Belgrade, 11001, Serbia
²Department of Materials Science and Engineering, Norwegian University of Science and Technology, Trondheim-7491, Norway
³Istituto di Struttura della Materia – CNR, 00016 Monterotondo Stazione (Roma), Italy

Chairpersons: Nenad Ignjatović and Bojana Obradović

17⁰⁰-17¹⁵

Multifunctional opto-magnetic NaYF₄:Er_3⁺,Yb₃₊,Gd₃₊&Fe₃O₄@SiO₂ nanoconstructs – towards biomedical applications
Bożena Sikora¹, Przemysław Kowalik¹, Krzysztof Fronc¹, Jakub Mikulski¹, Izabela Kamińska¹, Anna Borodziuk², Magdalena Duda², Katarzyna Łysiak³, Maciej Szewczyk^4,5, Karolina Zajdel⁶, Grzegorz Gruzeł⁷, Leandro C. Figueiredo⁸, Paulo C. Morais^8,9, Laise Andrade¹⁰, João P. Longo¹⁰, Ricardo B. de Azevedo¹⁰, Zulmira G. M. Lacava¹⁰, Ewa Mosiniewicz-Szablewska¹, Magdalena Parlińska-Wojtan⁷, Roman Minikayev¹, Tomasz Wojciechowski¹, Anita Gardias³, Jarosław Rybusiński³, Andrzej Sienkiewicz^11,12, Mariusz Łapiński¹³, Piotr Stępień^4,5,14, Wojciech Paszkowicz¹, Jacek Szczytko³, Andrzej Twardowski³, Małgorzata Frontczak-Baniewicz⁶, Danek Elbaum^1
1Institute of Physics, Polish Academy of Sciences, Al Lotników 32/46, Warsaw
²Division of Biophysics, Institute of Experimental Physics UW, Zwirki i Wigury 93, Warsaw
³Institute of Experimental Physics, Faculty of Physics UW, ul. Pasteura 5, Warsaw
⁴Institute of Genetics and Biotechnology, Faculty of Biology UW, Pawińskiego 5a, Warsaw
⁵Institute of Biochemistry and Biophysics PAS, Pawińskiego 5a, Warsaw
⁶Mossakowski Medical Research Centre PAS, Pawińskiego 5, Warsaw
⁷Institute of Nuclear Physics PAS, ul. Radzikowskiego 152, 31-342 Krakow
⁸Instituto de Fisica, Universidade de Brasilia, Brasilia DF 70919-970, Brazil
⁹College of Chemistry and Chemical Engineering, Anhui University, Hefei 230601, China
¹⁰Instituto de Ciências Biológicas, Departamento de Genética e Morfologia, Universidade de Brasilia, Brasilia DF 70919-970, Brazil
¹¹Laboratory of Physics of Complex Matter, EPFL, Station 3, CH-1015 Lausanne, Switzerland
¹²ADSresonaces, CH-1028 Préverenges, Switzerland
¹³Institute of Optoelectronics, Military University of Technology, Gen. S. Kaliskiego 2, Warsaw
¹⁴Centre of New Technologies, Ochota UW, S. Banacha 2c, Warsaw

17¹⁵-17³⁰

Tumor-selective hybrid system based on hydroxyapatite nanocarrier, chitosane, poly(lactic-co-glycolic acid) and androstan derivate
Nenad L. Ignjatović¹, Katarina M. Penov-Gaši², Victoria M. Wu³, Jovana J. Ajduković⁴, Vesna V. Kojić⁴, Dana Vasiljević-Radović⁵, Vuk D. Uskoković^3,6, Dragan P. Uskoković^1
1Institute of Technical Sciences of SASA, Knez Mihailova 35/IV, P.O. Box 377, 11000 Belgrade, Serbia
²University of Novi Sad, Faculty of Sciences, Department of Chemistry, Biochemistry and Environmental Protection, Trg Dositeja Obradovića 3, 21000 Novi Sad, Serbia
³Advanced Materials and Nanobiotechnology Laboratory, Department of Bioengineering, University of Illinois, 851 South Morgan Street, Chicago, IL 60607-7052, USA
⁴Oncology Institute of Vojvodina, Put Dr Goldmana 4, 21204 Sremska Kamenica, Serbia
⁵University of Belgrade, Institute for Chemistry, Technology and Metallurgy, Njegoševa 12, 11000 Belgrade, Serbia
⁶Department of Biomedical and Pharmaceutical Sciences, School of Pharmacy, Chapman University, 9401 Jeronimo Road, Irvine, CA 92618-1908, USA

17³⁰-17⁴⁵

One pot and two step synthesis of 1D and 2D calcium phosphates and their biomedical characteristics
Zoran S. Stojanović¹, Nenad Ignjatović¹, Victoria Wu², Vojka Žunič³, Ljiljana Veselinović¹, Srečo Škapin³, Miroslav Miljković⁴, Vuk Uskoković^2,5, Dragan Uskoković¹
1Institute of Technical Sciences of SASA, Knez Mihailova 35/4, 11000 Belgrade, Serbia
²Advanced Materials and Nanobiotechnology Laboratory, Department of Bioengineering, University of Illinois, 851 South Morgan Street, Chicago, IL 60607-7052, USA
³Advanced Materials Department, Jožef Stefan Institute, Jamova cesta 39, 1000 Ljubljana, Slovenia
⁴Laboratory for Electron Microscopy, Faculty of Medicine University of Niš, Dr. Zoran Đinđić Boulevard 81, 18 000 Niš, Serbia
⁵Department of Biomedical and Pharmaceutical Sciences, School of Pharmacy, Chapman University, 9401 Jeronimo Road, Irvine, CA 92618-1908, USA

17⁴⁵-18⁰⁰

Alginate hydrogels with silver nanoparticles and honey as potential wound dressings
Bojana Obradović¹, Jasmina Stojkovska¹, Vesna Mišković-Stanković¹, Milica Labudović Borović², Ljiljana Šćepanović^2
1Faculty of Technology and Metallurgy, University of Belgrade, Belgrade, Serbia
²School of Medicine, University of Belgrade, Belgrade, Serbia

18⁰⁰-18¹⁵

Novel platforms for designing antimicrobial biomaterials
Marija Vukomanović, Vojka Žunič, Mario Kurtjak, Nemanja Aničić, Danilo Suvorov
Advanced Materials Department, Jozef Stefan Institute, Ljubljana, Slovenia

18¹⁵-18³⁰

Coupling vanadate elution control with catalytic properties of V2O₅ in V2O₅/PLGA composite coating
Nemanja Aničić^1,2, Marija Vukomanović¹, Danilo Suvorov^1
1Advanced Materials Department, Jožef Stefan Institute, Ljubljana, Slovenia
²Jožef Stefan International Postgraduate School, Ljubljana, Slovenia

18³⁰-18⁴⁵

Quantifying the fractal dimension and the effective permeability of membrane fouling
Miguel Herrera-Robledo and Volodymyr V. Tarabara
Department of Civil and Environmental Engineering, Michigan State University, USA

18⁴⁵-19⁰⁰

Effect of cooling rate from α+β range on stereological parameters of microstructure in the Ti₆Al₇Nb alloy
Krzysztof Wieczerzak, Robert Dąbrowski, Edyta Rożniata, Rafał Dziurka
AGH University of Science and Technology, Faculty of Metals Engineering and Industrial Computer Science, Al. A. Mickiewicza 30, 30-059 Kraków, Poland

Chairmen: Zoran S. Petrović and Smilja Marković

15⁰⁰-15¹⁵

Boson peak and glass forming ability in CuHfTi metallic glasses
Amra Salčinović Fetić^1,2, G. Remenyi^3,4, D. Starešinić², E. Babić⁵, I. A. Figueroa6, H. A. Davies⁷, and K. Biljaković^2,3
1Department of Physics, Faculty of Science, University of Sarajevo, Zmaja od Bosne 32, B&H-71000 Sarajevo, Bosnia and Herzegovina
²Institute of Physics, Bijenička c. 46, P.O. Box 304, HR-10000 Zagreb, Croatia
³CNRS, Institut Néel, F-38042 Grenoble, France
⁴Institut Néel, Université Grenoble Alpes, F-38042 Grenoble, France
⁵Department of Physics, Faculty of Science, Bijenička c. 32, HR-10000 Zagreb, Croatia
⁶Institute for Materials Research-UNAM, Ciudad Universitaria Coyoacan, C.P. 04510 Mexico D.F., Mexico
⁷Department of Engineering Materials, University of Sheffield, Sheffield S1 3JD, United Kingdom

15¹⁵-15³⁰

The influence of thermal treatment on physicochemical properties of graphene oxide/phosphotungstic acid nanocomposite
Zoran Jovanović¹, Danica Bajuk-Bogdanović², Milica Vujković², Željko Mravik², Ivanka Holclajtner-Antunović^2
1Laboratory of Physics, Vinča Institute of Nuclear Sciences, University of Belgrade, P.O. Box 522, 11001 Belgrade, Serbia
²Faculty of Physical Chemistry, University of Belgrade, P.O. Box 47, 11158 Belgrade, Serbia

15³⁰-15⁴⁵

Influence of point defects concentration on optical and photocatalytic properties of ZnO ceramics
Smilja Marković¹, Vladimir Rajić², Ljiljana Veselinović¹, Jelena Belošević-Čavor³, Srečo Davor Škapin⁴, Stevan Stojadinović⁵, Vladislav Rac6, Steva Lević⁶, Miloš Mojović², Dragan Uskoković^1
1Institute of Technical Sciences of SASA, Belgrade, Serbia
²Faculty of Physical Chemistry, University of Belgrade, Belgrade, Serbia
³The Vinča Institute of Nuclear Sciences, University of Belgrade, Belgrade, Serbia
⁴Jožef Stefan Institute, Ljubljana, Slovenia
⁵Faculty of Physics, University of Belgrade, Belgrade, Serbia
⁶Faculty of Agriculture, University of Belgrade, Zemun, Serbia

15⁴⁵-16⁰⁰

Activated track etched carbon for supercapacitor electrodes
Petar Laušević, Predrag Pejović, Dragana Žugić, Yuri Kochnev, Pavel Apel and Zoran Laušević
¹Laboratory of physical chemistry, Vinča institute of nuclear sciences, University of Belgrade, Serbia
²School of Electrical Enginering, University of Belgrade, Serbia
³Flerov laboratory of nuclear reactions, Joint institute for nuclear research, Dubna, Russia

16⁰⁰-16¹⁵

The influence of fluorine doping on the structural and the electrical properties of LiFePO4 powder
Dragana Jugović¹, Miodrag Mitrić², Miloš Milović¹, Nikola Cvjetićanin³, Bojan Jokić⁴, Ana Umićević², Dragan Uskoković^1
1Institute of Technical Sciences of SASA, Knez Mihailova 35/IV, 11 000 Belgrade, Serbia
²Vinča Institute of Nuclear Sciences, University of Belgrade, P.O. Box 522, 11 001 Belgrade, Serbia
³Faculty of Physical Chemistry, University of Belgrade, Studentski Trg 12-16, P.O. Box 137, Belgrade, Serbia
⁴Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11 000 Belgrade, Serbia

Chairmen: Smilja Marković and Irena Nikolić

16⁴⁵-17⁰⁰

Designing materials from biological oils
Zoran S. Petrovic
Pittsburg State University, Kansas Polymer Research Center

17⁰⁰-17¹⁵

Recovery of rare earth elements of bastnasite ores by advanced hydrometallurgical methods
Carsten Dittrich¹, Srecko Stopic², Bernd Friedrich^2
1MEAB Chemie Technik GmbH, Aachen, Germany
²IME Process Metallurgy and Metal Recycling

17¹⁵-17³⁰

Strength and durability of alkali activated slag in a sea water: influence of alkali ion
Irena Nikolić¹, Smilja Marković², Ljiljana Karanović³, Vuk Radmilović⁴, Velimir Radmilović^5
1University of Montenegro, Faculty of Metallurgy and Technology, Džordža Vašingtona bb, 81 000 Podgorica, Montenegro
²Institute of Technical Sciences of SASA, Knez Mihailova 35, Belgrade, Serbia
³University of Belgrade, Faculty of Mining and Geology, Laboratory of Crystallography, Đušina 7, 11000 Belgrade, Serbia
⁴Innovation center, University of Belgrade, Faculty of Technology and Metallurgy, Karnegijeva 4, 11120 Belgrade, Serbia
⁵Serbian Academy of Sciences and Arts, Knez Mihailova 35, Belgrade, Serbia

P.S.A.1.  Novel pathway towards the synthesis of complex double perovskites
Jasminka Popovic, Marijana Juric, Lidija Andros Dubraja, Kresimir Molcanov
Rudjer Boskovic Institute, Bijenicka 54, HR-10000 Zagreb, Croatia

P.S.A.2.  High-temperature treatment for new properties of LuPO₄:Eu, Lu₂O₃:Tb,Ti/Hf and BaHfO₃:Pr
Justyna Zeler, Dagmara Kulesza, Ioannis Seferis, Eugeniusz Zych
Faculty of Chemistry, University of Wrocław, 14 F. Joliot-Curie Street, 50-383 Wrocław, Poland

P.S.A.3.  Processing and characterization of dental acrylate improved with zirconia
Abdulsalam Ahmed Emadani, Nataša Tomić, Miloš Petrović, Dusica B. Stojanović, Petar S. Uskoković, Radmila Jančić Heinemann, Vesna Radojević
University of Belgrade, Faculty of Technology and Metallurgy, Karnegijeva 4, Belgrade, Serbia

P.S.A.4.  Biocompatible poly(methyl methacrylate)/di-methyl itaconate – (iron oxide dopped alumina) composite with improved mechanical properties
Gamal Ali Lazouzi, Nataša Tomić, Miloš Petrović, Milorad Zrilić, Vesna Radojević, Radmila Jančić Heinemann
University of Belgrade, Faculty of Technology and Metallurgy, Karnegijeva 4, Belgrade, Serbia

P.S.A.5.  Rapid fabrication of antimicrobial poly(vinyl butyral)/ titania nanofibers using multi-needle electrospinning
Faisal Ali Alzarrug, Dušica B. Stojanović, Vera M. Obradović, Anđela N. Radisavljević, Aleksandar M. Kojović, Petar S. Uskoković, Radoslav R. Aleksić
University of Belgrade, Faculty of Technology and Metallurgy, Serbia

P.S.A.6.  Thin films of MoS₂ on Cu₂O as biosensors
Alexandra Yu. Ledneva¹, Sofya B. Artemkina¹, Hsiang-Chen Wang², Vladimir E. Fedorov^1
1Nikolaev Institute of Inorganic Chemistry, Siberian Branch of Russian Academy of Sciences, Novosibirsk, Russia, ²Graduate Institute of Opto-Mechatronics, National Chung Cheng University, Taiwan

P.S.A.7.  PVA membranes doped with Ti and Zr oxide for alkaline electrolysis with ionic activators
Sladjana Maslovara¹, Dragana Zugic¹, Milica Marceta Kaninski¹, Vladimir Nikolic¹, Gvozden Tasic¹, Yuri Kochnev^2
1Vinca Institute of Nuclear Sciences, Department of Physical Chemistry, University of Belgrade, Serbia, ²Flerov laboratory of nuclear reactions, Joint institute for nuclear research, Dubna, Russia

P.S.A.8.  Influence of the nickel loading and the calcination temperature on the activity of NiO-Al₂O₃ catalyst prepared by mixing powders of metal oxides in the partial oxidation of methane
Matilda Lazić
Technical College of Applied Sciences in Zrenjanin, Zrenjanin, Serbia

P.S.A.9.  Structural and magnetic properties of mechanochemically synthesized LaFe_1-xCr_xO₃ (x = 0.5 and 0.75)
Dragana Jugović¹, Ivica Bradarić², Čedomir Jovalekić³, Tanja Barudžija², Vladan Kusigerski², Miodrag Mitrić^2
1Institute of Technical Sciences of SASA, Knez Mihailova 35/IV, 11 000 Belgrade, Serbia, ²Institute of Nuclear Sciences “Vinča”, University of Belgrade, P.O. Box 522, 11001 Belgrade, Serbia, ³Centre for Multidisciplinary Studies, University of Belgrade, Kneza Višeslava 1a, 11030 Belgrade, Serbia

P.S.A.10.  Surfactant-assisted high energy ball milling technique as a method for preparation of magnetic submicrometer particles
Vesna Jović, Jelena Lamovec, Katarina Radulović, Danijela Ranđelović, Zoran Jakšić, Dana Vasiljević – Radović
Centre of Microelectronic Technologies, Institute of Chemistry, Technology and Metallurgy, University of Belgrade, Njegoseva 12, 11000 Belgrade, Serbia

P.S.A.11.  Characterization of NdFeB magnetic submicron particles obtained by surfactant-assisted high energy ball milling (SA-HEBM)
Jelena Lamovec¹, Vesna Jović¹, Davor Lončarević², Katarina Radulović¹, Zoran Jakšić¹, Danijela Ranđelović¹, Dana Vasiljević – Radović^1
1Centre of Microelectronic Technologies, Institute of Chemistry, Technology and Metallurgy, University of Belgrade, Belgrade, Serbia, ²Department of Catalysis and Chemical Engineering, Institute of Chemistry, Technology and Metallurgy, University of Belgrade, Njegoseva 12, 11000 Belgrade, Serbia

P.S.A.12.  Experimental and theoretical analysis of fullerenol nanoparticles/water system
Milan Vraneš, Ivana Borišev, Stevan Armaković, Sanja J. Armaković, Aleksandar Tot, Danica Jović, Slobodan Gadžurić, Aleksandar Djordjević
¹Department for Chemistry, Biochemistry and Environmental Protection, University of Novi Sad, Novi Sad, Serbia, ²Department of Physics, Faculty of Sciences, University of Novi Sad, Novi Sad, Serbia

P.S.A.13.  Highly Efficient Graphene Supports for Fuel Cells
Veera Sadhu¹, Esaam Jamil², Selmiye Alkan Gürsel^1,2
1Nanotechnology Research and Application Center, Sabanci University, 34956 Istanbul, Turkey, ²Faculty of Natural Science and Engineering, Sabanci University, 34956 Istanbul, Turkey

P.S.A.14.  Modeling of optimal parameters of synthesis and sintering of nanostructured NiFeCuW powder
Slađana Đurašević¹, Dejan Vujičić¹, Marija Nikolić², Siniša Ranđić^1
1Faculty of Technical Sciences in Čačak, University of Kragujevac, Serbia, ²Technical College Čačak, Serbia

P.S.A.15.  The study of the products of off-line pyrolysis of poly(ethyleneimine)
Vesna Balanac¹, Tatjana Šolević Knudsen², Branimir Jovančićević³, Jan Schwarzbauer⁴, Vesna Antić^5
1Cooper Standard Srbija doo, Dimitrija Davidovića 1, 22000 Sremska Mitrovica, ²Center of Chemistry, Institute of Chemistry, Technology and Metallurgy, Studentski trg 12-16, 11000 Belgrade, Serbia, ³Faculty of Chemistry, Studentski trg 12-16, 11000 Belgrade, Serbia, ⁴Institute of Geology and Geochemistry of Petroleum and Coal, RWTH Aachen University, Lochnerstr. 4-20, D-52056 Aachen, Germany, ⁵Faculty of Agriculture, Nemanjina 6, 11080 Zemun, Serbia

P.S.A.16.  Parameters and sinterability of mullite-ZrO₂(Y₂O₃) nanoparticles prepared by plasma and chemical methods
Jānis Grabis, Dzidra Jankoviča, Inta Sīpola
Riga Technical University, Faculty of Material Science and Applied Chemistry, Institute of Inorganic Chemistry

P.S.A.17.  Sample preparation method influence on SOP modes in ZnO(Mn)
Branka Hadžić, Nebojsa Romčević, Maja Romčević, Witold Dobrowolski, Martina Gilić, Milica Petrović, Dusanka Stojanović, Željka Nikitović and Zorica Lazarević
¹Institute of Physics, Pregrevica 118, 11080 Belgrade, Serbia, ²Institute of Physics Polish Academy of Science, Al. Lotnikow 32/46 02-668 Warzawa, Poland

P.S.A.18.  Crystal structure, optical and magnetic properties of ZnO:Fe nanoparticles
Vladimir Rajić¹, Smilja Marković², Ljiljana Veselinović², Miodrag Mitrić³, Jelena Belošević-Čavor³, Valentin Ivanovski³, Vladan Kusigerski³, Miloš Mojović¹, Srečo Davor Škapin⁴, Stevan Stojadinović⁵, Steva Lević⁶, Vladislav Rac⁶, Dragan Uskoković^2
1Faculty of Physical Chemistry, University of Belgrade, Belgrade, Serbia, ²Institute of Technical Sciences of SASA, Belgrade, Serbia, ³The Vinča Institute of Nuclear Sciences, University of Belgrade, Belgrade, Serbia, ⁴Jožef Stefan Institute, Ljubljana, Slovenia, ⁵Faculty of Physics, University of Belgrade, Belgrade, Serbia, ⁶Faculty of Agriculture, University of Belgrade, Zemun, Serbia

Chairmen: Eiji Osawa and Francois M. Peeters

08³⁰-09⁰⁰

Grain boundary geometry, structural units and segregation in oxides
Yuichi Ikuhara^1,2,3
1Institute of Engineering Innovation, The University of Tokyo, Tokyo, 113-8656, Japan
²Nanostructures Research Laboratory, Japan Fine Ceramics Center, Nagoya, 456-8587, Japan
³WPI-AIMR Research Center, Tohoku University, Sendai, 980-8577, Japan

09⁰⁰-09³⁰

Interfacial step alignment as a mechanism of hetero-epitaxy/orientation relationships: the case of Ag on Ni
Dominique Chatain¹, Paul Wynblatt², Anthony D. Rollett², Gregory S. Rohrer^2
1Aix-Marseille University, CNRS, CINaM, UMR 7325, 13288 Marseille, France
²Department of Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, PA 15213, USA

09³⁰-10⁰⁰

Controlling Microstructural Evolution via Adsorption
Wayne D. Kaplan
Department of Materials Science and Engineering, Technion - Israel Institute of Technology

Chairpersons: Dominique Chatain and Yuichi Ikuhara

10³⁰-11⁰⁰

TEM observation of atomic structures and their evolutions in 2D and 1D materials
Kazu Suenaga
Advanced Industrial Science and Technology

11⁰⁰-11³⁰

Atomic Structure of defects, dopants and edge terminations in monolayer 2D materials
Jamie H. Warner
Department of Materials, University of Oxford

11³⁰-12⁰⁰

Atomic collapse in graphene
Francois Peeters¹, Dean Moldovan¹, Massoud R. Masir^1,2, Eva Andrei^3
1Department Physics, University of Antwerp, Groenenborgerlaan 171, B-2020 Antwerpen
²Department of Physics, University of Texas at Austin, Austin TX 78712, USA
³Rutgers University, Department of Physics and Astronomy, Piscataway, NJ 08855, USA

12⁰⁰-12³⁰

Aberration corrected views of of chemical ordering and segregation in complex oxides
Maria Varela
Facultad de CC. Fisicas & Instituto Pluridisciplinar, Universidad Complutense de Madrid 28040 Madrid, Spain

P.S.B.1.  Electrone structure, valence state Ce(Yb) and magnetic properties of new ternary intermetallic compounds
Ivan Shcherba^1,2, Dragan Uskokovic³, Viktor Antonov⁴, Maria Kovalska², Ljubov Romaka², Sergij Senkiv^2
1Institute of Technology, the Pedagogical University of Cracow, Podchorozych st. 2 Cracow 30-084 Poland, ²Ivan Franko National University of Lviv, Ukraine, ³Institute of Technical Sciences of SASA, Belgrade, Serbia, 4Institute of Physics of Metals, NASU, Kyiv, Ukraine

P.S.B.2.  Influence of different precursor solutions on final characteristics of barium titanate based thin films
Jovana Stanojev¹, Jelena Vukmirovic¹, Branimir Bajac¹, Elvira Djurdjic², Srdjan Rakic², Vladimir V. Srdic^1
1Faculty of Technology, Department of Materials Engineering, University of Novi Sad, Bul. Cara Lazara 1, 21000 Novi Sad, Serbia, ²Faculty of Sciences, Department of Physics, University of Novi Sad, Trg D. Obradovića 4, 21000 Novi Sad, Serbia

P.S.B.3.  YBCO bulk superconductor exposed to air moisture
Pavel Diko¹, Mária Kaňuchová², Samuel Piovarči¹, Vitaliy Antal¹, Daniela Volochová^1
1Institute of Experimental Physics, Slovak Academy of Sciences, Watsonova 47 04001 Košice, Slovakia, ²Faculty of Mining, Ecology, Process Control and Geotechnology, Technical University of Košice, Park Komenského 17, 042 00 Košice, Slovakia

P.S.B.4.  Computational study of loratadine reactivity in order to understand its degradation properties from the aspect of DFT and MD simulations
Sanja J. Armaković¹, Stevan Armaković² and Biljana Abramović^1
1University of Novi Sad, Faculty of Sciences, Department of Chemistry, Biochemistry and Environmental Protection, Trg D. Obradovića 3, 21000 Novi Sad, Serbia, ²University of Novi Sad, Faculty of Sciences, Department of Physics, Trg D. Obradovića 4, 21000 Novi Sad, Serbia

P.S.B.5.  Synthesis and characterization of Pd nanocatalyst at tungsten carbide based support for fuel cells application
Ljiljana M. Gajic-Krstajic¹, P. Zabinski², V.R. Radmilovic³, P. Ercius⁴, M. Krstajic-Pajic⁵, U.Č. Lačnjevac⁶, N.V. Krstajic³, N.R. Elezovic^6
1Institute of Technical Sciences of SASA, Knez Mihailova 35, Belgrade, Serbia, ²AGH University of Science and Technology, Faculty of Non-Ferrous Metals, Al. Mickiewicza 30,30-059 Krakow, Poland, ³Faculty of Technology and Metallurgy University of Belgrade, Karnegijeva 4, 11000 Belgrade, Serbia, ⁴National Center for Electron Microscopy, LBNL University of California, Berkeley, CA, USA, 5Institute for Chemistry Technology and Metallurgy University of Belgrade, Njegoseva 12, Belgrade, ⁶Institute for Multidisciplinary Research, University of Belgrade, Kneza Viseslava 1, 11030 Belgrade, Serbia

P.S.B.6.  Corrosion stability of graphene coatings on metallic substrates
Ivana Jevremović¹, Samira Naghdi², Kyong Yop Rhee², Vesna Mišković-Stanković^1
1Faculty of Technology and Metallurgy, University of Belgrade, Belgrade, Serbia, ²Department of Mechanical Engineering, College of Engineering, Kyung Hee University, 446-701 Yongin, Republic of Korea

P.S.B.7.  Solid-state reactions in nanomaterials based on monolayered chalcogenides of transition metals
Svetlana Kozlova, Maxsim Ryzhikov, Vladimir Fedorov
Nikolaev Institute of Inorganic Chemistry SB RAS, 630090, Ave. Akad. Lavrentiev 3, Novosibirsk, Russia

P.S.B.8.  SiC and Si-C-N ceramics derived from new siliconorganic polymers
Aleksei Utkin, Natalya Baklanova
Institute of Solid State Chemistry and Mechanochemistry SB RAS, Russia

P.S.B.9.  Macroporous conducting cryogels based on polyaniline
Jaroslav Stejskal, Miroslava Trchová, Patrycja Bober
Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, 162 06 Prague 6, Czech Republic

P.S.B.10.  Temperature responsive hydrogels with ethylene glycol propylene glycol pendant chains
Edin Suljovrujic, Zorana Rogic Miladinovic, Dejan Milicevic, Maja Micic
Vinca Institute of Nuclear Sciences, University of Belgrade, Belgrade, Serbia

P.S.B.11.  Nanocomposites of polypyrrole nanotubes and noble-metal nanoparticles
Miroslava Trchová¹, Irina Sapurina^1,2, Jaroslav Stejskal^1
1Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, 162 06 Prague 6, Czech Republic, ²Institute of Macromolecular Compounds, Russian Academy of Sciences, St. Petersburg 199004, Russian Federation

P.S.B.12.  Electrical properties of mechanically activated magnesium-titanate ceramics
Nebojša Mitrović¹, Suzana Filipović², Jelena Orelj¹, Aleksandra Kalezić-Glišović¹, Slobodan Djukić^1
1Faculty of Technical Sciences Čačak, University of Kragujevac, Serbia, ²Institute of Technical Sciences of SASA, Belgrade, Serbia

P.S.B.13.  Influence of mechanical activation on the MgO-Al₂O₃-SiO₂ system with TeO₂
Nataša Đorđević¹, Nina Obradović², Suzana Filipović¹, Darko Kosanović², Smilja Marković², Miodrag Mitrić³, Vladimir B. Pavlović^2
1Institute for Technology of Nuclear and Other Mineral Raw Materials, Bulevar Franse d¢Eperea 86, 11000 Belgrade, Serbia, ²Institute of Technical Sciences of SASA, Knez Mihailova 35/IV, 11000 Belgrade, Serbia, ³Vinča Institute of Nuclear Sciences, University of Belgrade, Mike Alasa 12-14, 11000 Belgrade, Serbia

P.S.B.14.  Temperature dependence of thermal conductivity of two-layered graphene
Stevo Jaćimovski¹, Dejan Raković^2
1Academy of Criminalistic and Police Studies, Belgrade, Serbia, ²University of Belgrade, Faculty of Electrical Engineering, Serbia

P.S.B.15.  The electrical resistance decay of a metalic granular packing
Zorica M. Jakšić¹, Milica Cvetković¹, Julija. R. Šćepanović¹, Ivana Lončarević², Ljupka Budinski-Petković² and Slobodan B. Vrhovac^1
1Institute of Physics Belgrade, University of Belgrade, Pregrevica 118, Zemun 11080, Belgrade, Serbia, ²Faculty of Engineering, Trg D. Obradovića 6, Novi Sad 21000, Serbia

P.S.B.16.  Analyses of commercially and laboratory produced ODS steels
Jarmila Degmová, Jana Šimeg Veterniková, Veronika Sabelová, Július Dekan, Milan Pavúk, Stanislav Sojak, Martin Petriska,Vladimír Slugeň
Institute of Nuclear and Physical Engineering, Slovak University of Technology, Ilkovičova 3, 812 19 Bratislava, Slovakia

P.S.B.17.  Ni-based alloys coatings for high temperature applications
Monika Solecka, Agnieszka Kopia, Agnieszka Radziszewska, Jan Kusiński, Łukasz Cieniek
Department of Surface Engineering and Materials Characterisation, Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology in Krakow, Poland

P.S.B.18.  Effects of retrogression and reaging treatments on the mechanical characteristics of alloy EN AW 7049A-T6
Jelena Marinković, Ljubica Radović, Milutin Nikačević
Military Technical Institute, Belgrade, Serbia

P.S.B.19.  Characteristics of stress distribution in the case of singl LAP joint of two composite plates
Abdurrahman Houssein
Alabel Algharb Univesrty, Dean of Engineering Facutly zintan, Libya

P.S.B.20.  OLE of tribology effects on cup anemometer classification
Miodrag Zlatanović¹, Ivan Popović^2
1Wind Electricity doo, ²School of Electrical Engineering, Beograd, Serbia

P.S. B.21.  Monte Carlo simulations of He+ in CF₄
Željka D. Nikitović, Zoran M. Raspopović, Vladimir D. Stojanović
Institute of Physics, University of Belgrade, Pregrevica 118, 11080 Belgrade, Serbia

Chairmen: Danilo Suvorov and Philippe Colomban

08³⁰-09⁰⁰

Towards device physics of the CH3NH3PbI3 photovoltaic perovskite
László Forró
Laboratory of Physics of Complex Matter, Ecole Polytechnique Fédérale de Lausanne, CH-1015 Lausannes, Swiss

09⁰⁰-09³⁰

Tailoring defined-shape ferroelectric particles for various ferro- and piezoelectric applications
Danilo Suvorov¹, M. Macek-Krzmanc¹ and H. Ursic Nemevsek^2
1Advanced Materials Department, Jožef Stefan Institute, Jamova 39, Ljubljana, Slovenia, 1000
²Electronic ceramics Department, Jožef Stefan Institute, Jamova 39, Ljubljana, Slovenia, 1000

09³⁰-10⁰⁰

How could electrolytes and electrodes be friendlier for Li-ion traffic?
Mamoru Senna
Faculty of Science and Technology, Keio University, Japan

Chairmen: Mamoru Senna and László Forró

10³⁰-11⁰⁰

Recent progress in R&D of the primary particles of detonation nanodiamond
Eiji Osawa, Shuichi Sasaki, Ryoko Yamanoi
NanoCarbon Research Institute Limited

11⁰⁰-11³⁰

Nanodiamond and its derivatives for catalysis
Dangsheng Su
Dalian Institute of Chemical Physics, Chinese Academy of Science, Dalian, China

11³⁰-12⁰⁰

Scaffolds for tissue repair and regeneration
Serena Best
University of Cambridge

12⁰⁰-12³⁰

Advanced and in situ transmission electron microscopy of semiconductor nanowire materials
Wolfgang Jäger
Institute of Materials Science, Christian-Albrechts-University of Kiel, 24143 Kiel, Germany EU

P.S.C.1.  Characterization of graphite-encapsulated iron nanoparticles synthesized by milling-assisted low-pressure chemical vapor deposition
Duygu Ağaoğulları¹, Steven Madsen², Ai Leen Koh³, Robert Sinclair^2
1Department of Metallurgical and Materials Engineering, Istanbul Technical University, Maslak, Istanbul 34469, Turkey, ²Department of Materials Science and Engineering, Stanford University, Stanford, CA 94305-4034, USA, ³Stanford Nano Shared Facilities, Stanford University, Stanford, CA 94305-4045, USA

P.S.C.2.  Structures and properties of quasi-onedimensional vanadium and niobium sulfides with Peierls distortion
Vladimir E. Fedorov¹, Andrey N. Enyashin², Svetlana G. Kozlova¹, Mariia N. Kozlova¹, Maxim R. Ryzhikov^1
1Nikolaev Institute of Inorganic Chemistry, Siberian Branch of Russian Academy of Sciences, Novosibirsk, Russia, ²Institute of Solid State Chemistry, Ural Branch of Russian Academy of Sciences, Ekaterinburg, Russia

P.S.C.3.  Aqueous sol-gel route toward selected quaternary metal oxides with single and double perovskite-type structure containig tellurium
Igor Djerdj¹, Berislav Marković¹, Jasminka Popović², Tobias Weller³, Zvonko Jagličić^4,5, Željko Skoko⁶, Damir Pajić⁶, Christian Suchomski³, Pascal Voepel³, Roland Marschall³, and Bernd M. Smarsly^3
1Department of Chemistry, J. J. Strossmayer University of Osijek, Ulica cara Hadri-jana 8/a, HR-31000 Osijek, Croatia, ²Ruđer Bošković Institute, Bijenička 54, 10000 Zagreb, Croatia, ³Institute of Physical Chemistry, Justus-Liebig-University Giessen, Heinrich-Buff-Ring 17, 35392 Giessen, Germany, ⁴Institute of Mathematics, Physics and Mechanics, Jadranska 19, 1000 Ljubljana, Slovenia, ⁵Faculty of Civil and Geodetic Engineering, University of Ljubljana, Jamova 2, 1000 Ljubljana, Slovenia, ⁶Department of Physics, Faculty of Science, University of Zagreb, Bijenička 32, 10000 Zagreb, Croatia

P.S.C.4.  Thiol click chemistry on gold-decorated MoS₂: elastomer composites and structural phase transitions
Peter Topolovsek¹, Luka Cmok¹, Christoph Gadermaier¹, Milos Borovsak¹, J. Kovacb², Ales Mrzel^1
1Department of Complex Matter, Jozef Stefan Institute, Jamova 39, 1000 Ljubljana, Slovenia, ²Department of Surface Engineering and Optoelectronics, Jozef Stefan Institute, Jamova 39, 1000 Ljubljana, Slovenia

P.S.C.5.  Positronics of sub-nanometer-structured functional materials
Oleh Shpotyuk^1,2, Adam Ingram³, Yaroslav Shpotyuk⁴, Jacek Filipecki^1
1Jan Dlugosz University in Czestochowa, 13/15, Armii Krajowej str., 42200, Czestochowa, Poland, ²Vlokh Institute of Physical Optics, 23, Dragomanov str., 79005 Lviv, Ukraine, ³Opole University of Technology, 75, Ozimska str., 45370 Opole, Poland, ⁴Centre for Innovation and Transfer of Natural Sciences and Engineering Knowledge, University of Rzeszow, 1, Pigonia str., 35-959 Rzeszow, Poland

P.S.C.6.  Colloidal dispersions of zirconium and titanium trisulfides
Pavel A. Poltarak¹, Anastasiia A. Poltarak², Mariia N. Kozlova¹, Sofia B. Artemkina¹, Vladimir E. Fedorov^1
1Nikolaev Institute of Inorganic Chemistry, ²Novosibirsk State University

P.S. C.7.  Investigation of rheological properties of barium titanate inks and adaptation to requirements of inkjet printing
Jelena Vukmirovic¹, Jovana Stanojev1, Branimir Bajac¹, Elvira Djurdjic², Sanja Kojic³, Goran Stojanovic³, Srdjan Rakic², Vladimir V. Srdic^1
1Faculty of Technology, Department of Materials Engineering, University of Novi Sad, Serbia, ²Faculty of Sciences, Department of Physics, University of Novi Sad, Serbia, ³Faculty of Technical Sciences, Department of Microelectronics, University of Novi Sad, Serbia

P.S.C.8.  Sputter-deposited Fe/Al thin superlattices: scanning of non-magnetic layer thickness
Ali Karpuz¹, Hakan Kockar², Salih Colmekci², Mehmet Uckun^2
1Department of Physics, Karamanoglu Mehmetbey University, Karaman, Turkey, ²Department of Physics, Balikesir University, Balikesir, Turkey

P.S.C.9  Effect of IF-WS2 nanoparticles addition on physical-mechanical and rheological properties and on chemical resistance of water-based paints
Dragana Lazić, Danica Simić, Aleksandra Samolov
Military Technical Institute, Ratka Resanovića 1, 11000 Belgrade, Serbia

P.S.C.10.  Nanocrystalline boehmite obtained at low temperature
Ivan Stijepović¹, Marija Milanović¹, Ljubica Nikolić¹, Zoran Obrenović^2
1University of Novi Sad, Faculty of Technology, Department of Materials Engineering, Bulevar cara Lazara 1, 21000 Novi Sad, Serbia, ²Faculty of Technology, University of East Sarajevo, Zvornik, Republic of Srpska, B&H

P.S. C.11.  Chromatic discretization and selectivity in optical properties of whole crystalline nanofilm-structures in IR region
Jovan P. Šetrajčić¹, Ana J. Šetrajčić–Tomić², Igor J. Šetrajčić¹, Siniša M. Vučenović^3
1University of Novi Sad, Faculty of Sciences, Department of Physics, Novi Sad, Vojvodina – Serbia, ²University of Novi Sad, Faculty of Medicine, Department of Pharmacy, Novi Sad, Vojvodina – Serbia, ³University of Banja Luka, Faculty of Sciences – Physics, Banja Luka, Republic of Srpska – B&H

P.S. C.12.  Effect of IF-WS₂ nanoparticles addition on thermo-rheological and mechanical behavior of aramid/phenolic resin/PVB composite material
Danica M. Simić¹, Dušica B. Stojanović², Ana D. Tasić¹, Petar S. Uskoković², Radoslav R. Aleksić^2
1Military Technical Institute, Ratka Resanovića 1, 11000 Belgrade, Serbia, ²University of Belgrade, Faculty of Technology and Metallurgy, Karnegijeva 4, 11000 Belgrade, Serbia

P.S. C.13.  Microstructure characterization of friction stir welded joints made from ultrafine grained aluminium
Marta Lipinska¹, Lech Olejnik², Adam Pietras³, Andrzej Rosochowski⁴, Malgorzata Lewandowska^1
1Faculty of Materials Science and Engineering, Warsaw University of Technology, Woloska 141, 02-507 Warsaw, Poland, ²Institute of Manufacturing Processes, Warsaw University of Technology, Narbutta 85, 02-524 Warsaw, Poland, ³Department of Friction and Resistance Welding and Environmental Engineering, Institute of Welding, Czeslawa 16/18, 44-100 Gliwice, Poland, ⁴Design, Manufacture and Engineering Management, University of Strathclyde, 75 Montrose Street, Glasgow G1 1XJ, United Kingdom

P.S.C.14.  Synthesis of colloidal NIR-luminescent nanoparticles of rare-earth fluorides using microwave-hydrothermal treatment

Alexander Vanetsev^1,2, IlmoSildos¹, Yurii Orlovskii^1,2

¹Institute of Physics, University of Tartu, Tartu, Estonia, ²General Physics Institute, Russian Academy of Sciences, Moscow, Russia

P.S.E.1.  Synthesis, characterization and biological application of opto-magnetic nanocomposites with up-converting properties based on NaYF₄&Fe₃O₄@SiO₂ nanoparticles
Przemysław Kowalik¹, Bożena Sikora¹, Krzysztof Fronc¹, Jakub Mikulski¹, Izabela Kamińska¹, Anna Borodziuk², Magdalena Duda², Katarzyna Łysiak³, Maciej Szewczyk^4,5, Karolina Zajdel⁶, Grzegorz Gruzeł⁷, Leandro C. Figueiredo⁸, Paulo C. Morais^8,9, Laise Andrade¹⁰, João P. Longo¹⁰, Ricardo B. de Azevedo¹⁰, Zulmira G. M. Lacava¹⁰, Ewa Mosiniewicz-Szablewska¹, Magdalena Parlińska-Wojtan⁷, Roman Minikayev¹, Tomasz Wojciechowski¹, Anita Gardias³, Jarosław Rybusiński³, Andrzej Sienkiewicz^11,12, Mariusz Łapiński¹³, Piotr Stępień^4,5,14, Wojciech Paszkowicz¹, Jacek Szczytko³, Andrzej Twardowski³, Małgorzata Frontczak-Baniewicz⁶, Danek Elbaum^1
1Institute of Physics, Polish Academy of Sciences, Al Lotników 32/46, Warsaw, ²Division of Biophysics, Institute of Experimental Physics UW, Zwirki i Wigury 93, Warsaw, ³Institute of Experimental Physics, Faculty of Physics UW, ul. Pasteura 5, Warsaw, ⁴Institute of Genetics and Biotechnology, Faculty of Biology UW, Pawińskiego 5a, Warsaw, ⁵Institute of Biochemistry and Biophysics PAS, Pawińskiego 5a, Warsaw, ⁶Mossakowski Medical Research Centre PAS, Pawińskiego 5, Warsaw, ⁷Institute of Nuclear Physics PAS, ul. Radzikowskiego 152, 31-342 Krakow, ⁸Instituto de Fisica, Universidade de Brasilia, Brasilia DF 70919-970, Brazil, ⁹College of Chemistry and Chemical Engineering, Anhui University, Hefei 230601, China, ¹⁰Instituto de Ciências Biológicas, Departamento de Genética e Morfologia, Universidade de Brasilia, Brasilia DF 70919-970, Brazil, ¹¹Laboratory of Physics of Complex Matter, EPFL, Station 3, CH-1015 Lausanne, Switzerland, ¹²ADSresonaces, CH-1028 Préverenges, Switzerland, ¹³Institute of Optoelectronics, Military University of Technology, Gen. S. Kaliskiego 2, Warsaw, ¹⁴Centre of New Technologies, Ochota UW, S. Banacha 2c, Warsaw

P.S.E.2.  Development and characterization of Mg-containing hydroxyapatite, β-tricalcium phosphate and biphasic calcium phosphate bioceramics
Liga Stipniece, Inga Narkevica, Kristine Salma-Ancane, Liga Berzina-Cimdina
Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre of RTU, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Latvia

P.S.E.3.  Design and characterization of hydroxyapatite/poly(vinyl alcohol) nanocomposite coated titania scaffolds for bone repair
Inga Narkevica, Liga Stipniece, Jurijs Ozolins
Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre of RTU, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Pulka St. 3, Riga, LV-1007, Latvia

P.S.E.4.  Color of dental composite restorations related to dentin substituents

Jovana Marjanović¹, Djordje Veljović², Tatjana Savić-Stanković¹, Branka Trifković³, Djordje Janaćković², Vesna Miletić¹

¹University of Belgrade, School of Dental Medicine, DentalNet Research Group, Rankeova 4, Belgrade, Serbia, ²University of Belgrade, Faculty of Technology and Metallurgy, Karnegijeva 4, 11120 Belgrade, Serbia, ³University of Belgrade, School of Dental Medicine, Department of Prosthodontics, Rankeova 4, Belgrade, Serbia

P.S.E.5.  Synthesis, characterization and antimicrobial activity of pentagonal bipyramidal Fe(III) complexes with 2,6-diacetyl- pyridine bis(trimethylammoniumacetohydrazone)
B. R. Čobeljić¹, M. T. Milenković², M. R. Milenković¹, G. V. Brađan1, D. D. Radanović³ and K.K. Anđelković^1
1Faculty of Chemistry, University of Belgrade, Studentski trg 12–16, 11000 Belgrade, Serbia, ²Department of Microbiology and Immunology, Faculty of Pharmacy, University of Belgrade, Vojvode Stepe 450, Serbia, ³Institute of Chemistry, Technology and Metallurgy, University of Belgrade, Njegoševa 12, P.O. Box 815, 11000 Belgrade, Serbia

P.S.E.6.  Synthesis and development of polymeric scaffolds based on (meth)acrylates for tissue regeneration applications
Jovana S. Vuković, Marija M. Babić, Bojan Đ. Božić, Katarina M. Antić, Vuk V. Filipović, Jovanka M. Filipović, Simonida Lj. Tomić
Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, Belgrade, Serbia

Chairmen: Jamie H. Warner and Wolfgang Jäger

09⁰⁰-09³⁰

Neutron scattering and atomistic modeling for materials science
Max Avdeev
Australian Nuclear Science and Technology Organisation

09³⁰-10⁰⁰

Understanding failure and fatigue mechanisms of advanced and natural polymer fibres by Raman/IR microspectrometry
Philippe Colomban
Sorbonne Universités, UPMC Paris 06, MONARIS umr8233 CNRS

10⁰⁰-10³⁰

High-melting poinr compounds: new approaches and results
Rostislav A. Andrievski
Institute of Problems of Chemical Physics, Semenov Prospect, 1, Chernogolovka, Moscow Region, 142432, Russia

10³⁰-11⁰⁰
Deformation Mechanisms, Microstructure, and Mechanical Properties of High-Mn Austenitic Steels

James Wittig
Interdisciplinary Materials Science, Vanderbilt University, USA

Break: 11⁰⁰-11³⁰

Chairmen: Feng-Huei Lin and Vuk Uskoković

11³⁰-12⁰⁰

Hyaluronate-based thermo-sensitive hydrogel as cell carrier for nucleus pulposus regeneration and vitreous body substitute
Feng-Huei Lin
National Health Research Institutes (NHRI), Taiwan

12⁰⁰-12³⁰

From controlled drug delivery to gene therapies to bone regeneration: calcium phosphate nanoparticles as essential components of advanced biomaterials
Vuk Uskoković
Department of Biomedical and Pharmaceutical Sciences, Chapman University, Irvine, CA 92618-1908, USA