YUCOMAT 2023 - Scientific Programme
Book of Abstracts
Sunday, September 3, 2023
Monday, September 4, 2023
Morning
Afternoon
Tuesday, September 5 2023
Morning
Afternoon
Wednesday, September 6, 2023
Morning
Afternoon
Thursday, September 7, 2023
Third Poster Session, National Restaurant Jadranka Terrace
08.00-09.45 Chairpersons: Željko Radovanović, Veljko Đokić
YUCOMAT SYMPOSIUM C:
NANOSTRUCTURED MATERIALS
P.S.73.
The low temperature plastic deformation of ultrafine-grained Mg-Al-RE alloy processed by ECAP
Pavel Zabrodin, Tetiana Hryhorova, Sergii Shumilin
B. Verkin Institute for Low Temperature Physics and Engineering of the National Academy of Sciences of Ukraine, Kharkiv, Ukraine
P.S.74.
Enhanced superconductivity and electron-phonon interaction in point contacts of trigonal PtBi2
Oksana Kvitnitskaya1,2, Dmytro Bashlakov1, Grigory Shipunov2, Saicharan Aswartham2, Oleg Feya2,3, Dmitri Efremov2, Bernd Büchner2,4, Yurii Naidyuk1
1B.Verkin Institute for Low Temperature Physics and Engineering, NASof Ukraine, Kharkiv, Ukraine, 2Institute for Solid State Research, IFW Dresden, Dresden, Germany, 3Kyiv Academic University, Kyiv, Ukraine, 4Institut für Festkörper- und Materialphysik and Würzburg-Dresden Cluster of Excellence ct.qmat,Technische Universität Dresden, Dresden, Germany
P.S.75.
The microhardness of high-entropy Co0.25-xCr0.25Fe0.25Ni0.25Cxalloysin the temperature range 300-77 K
Hаnna Rusakova1, Larisa Fomenko1, Elena Tabachnikova1, Mikhail Tikhonovsky2, Anastasia Levenets2, Yi Huang3, Terry Langdon4
1B.Verkin Institute for Low Temperature Physics and Engineering of NAS of Ukraine, 47 Nauky Ave., Kharkiv, Ukraine, 2National Science Center, Kharkov Institute of Physics and Technology of the National Academy of Sciences of Ukraine, Kharkiv, Ukraine, 3Department of Design and Engineering, Faculty of Science and Technology, Bournemouth University, Poole, UK, 4Department of Mechanical Engineering, University of Southampton, Southampton, UK
P.S.76.
Microwave eccentric spherical cavities spectrum using local point-based boundary conditions method for eigenfrequencies
Zoya Eremenko, Igor Volovichev, Oleksiy Breslavets
O. Ya. Usikov Institute for Radiophysics and Electronics, National Academy of Science of Ukraine, Kharkiv, Ukraine
P.S.77.
Magnetically-controlled composites with amino-/mercapto- polysilsesquioxane coating for doxycycline sorption
Nataliia Stolyarchuk1, Veronika Tomina1, Inna Melnyk1,2
1Chuiko Institute of Surface Chemistry, NAS of Ukraine, Kyiv, Ukraine, 2Institute of Geotechnics SAS, Kosice, Slovak Republic
P.S.78.
Microstructural changes of LC3 on early-age carbonation curing at various temperatures
Katarina Šter, Andreja Pondelak, Aljoša Šajna, Sabina Dolenec
Slovenian National Building and Civil Engineering Institute, Ljubljana, Slovenia
P.S.79.
Hydrogenation properties of the Ni-Co nanostructured materials
Ihor Zavaliy, Andriy Kytsya, Yuriy Verbovytskyy, Khrystyna Vlad, Vasyl Berezovets
Karpenko Physico-Mechanical Institute of the NAS of Ukraine
P.S.80.
Photoluminescent properties of C60 fullerite intercalated with N2 and H2 molecules in a wide temperature range
Viktor Zoryansky, Yury Semerenko, Piotr Z. Vasilievich Zinoviev
B. Verkin ILTPE of NASU, Kharkiv, Ukraine
P.S.81.
Electrochemical detection of chloramphenicol drug based on ZnO and ZnO/graphene oxide composite nanoparticles
Ana Stanković1, Katarina Aleksić1, Marija Kratovac2, Ivana Stojković Simatović2, Marijana Kraljić Roković3, Smilja Marković1
1Institute of Technical Sciences of SASA, Belgrade, Serbia, 2University of Belgrade, Faculty of Physical Chemistry, Belgrade, Serbia, 3Faculty of Chemical Engineering and Technology, University of Zagreb, Zagreb, Croatia
P.S.82.
Modification of MoS2/GO composites with ball milling and thermal treatment for catalytic application
Jelena Rmuš Mravik1, Vladimir Rajić2, Blaž Belec3, Željko Mravik1, Zoran Jovanović1,Ivana Stojković Simatović4, Sandra Kurko1
1Center of excellence for hydrogen and renewable energy (CONVINCE), Vinča Institute of Nuclear Sciences - National Institute of the Republic of Serbia, University of Belgrade, Belgrade, Serbia, 2Vinča Institute of Nuclear Sciences - National Institute of the Republic of Serbia, University of Belgrade, Belgrade, Serbia, 3Materials Research Laboratory, University of Nova Gorica, Nova Gorica, Slovenia, 4Faculty of Physical Chemistry, University of Belgrade, Belgrade, Serbia
P.S.83.
Physicochemical properties of solvothermaly synthesized zinc copper ferrite nanoparticles
Sonja Jovanović, Jelena Rmuš Mravik, Marija Grujičić, Darija Petković, Milica Pejčić, Zoran Jovanović
Laboratory of Physics, Vinča Institute of Nuclear Sciences – National Institute of the Republic of Serbia, University of Belgrade, Belgrade, Serbia
P.S.84.
Anomalous chain confinement in chain-walking-polymerized polyethylenes as seen by advanced NMR crystallography
Jiri Brus1, Martina Urbanova1, Jiri Czernek1, Larisa Janisova1, Jan Merna2
1Department of NMR spectroscopy, Institute of Macromolecular Chemistry, Czech Academy of Sciences, Czech Republic, 2Department of Polymers, University of Chemistry and Technology Prague, Czech Republic
YUCOMAT SYMPOSIUM D:
ECO-MATERIALS AND ECO-TECHNOLOGIES
P.S.85.
Enhancement of g-C3N4 with sulfuric acid treatment for the photocatalitic reduction of Cr(VI)
Jana Petrović1, Željko Radovanović2, Slavica Lazarević1, Đorđe Janaćković1, Rada Petrović1
1University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia, 2Innovation Centre of the Faculty of Technology and Metallurgy, Ltd, Belgrade, Serbia
P.S.86.
Biocompatible soil conditioners based on polysaccharide hydrogels filled with layered clays and biochar
Olena Goncharuk1,2, OlenaSiryk1,2, KatarzynaSzewczuk-Karpisz1, YuriiSamchenko2
1Institute of Agrophysics, Polish Academy of Sciences, Lublin, Poland, 2Ovcharenko Institute of Biocolloidal Chemistry of NAS of Ukraine, Kyiv, Ukraine
P.S.87.
On biological influence of wide range non-ionizing em radiation and its bioresonance balancing prevention
Dejan Raković
University of Belgrade, Faculty of Electrical Engineering, Serbia
YUCOMAT SYMPOSIUM E:
BIOMATERIALS
P.S.88.
An artificially designed polypeptide based on elastin exon 26 primary structure showed enhanced thermo-responsive properties and improved cell adhesion
Antonella Bandiera, Laura Colomina-Alfaro, Paola Sist, Sabina Passamonti, Ranieri Urbani
Department of Life Sciences and Department of Chemical and Pharmaceutical Sciences, University of Trieste, Trieste, Italy
P.S.89.
Thermal characterization of bioactive polyphosphate glass with strontium addition
Vladimir S. Topalović1, Srđan D. Matijašević1, Jelena D. Nikolić1, Veljko V. Savić1, Marija S. Đošić1, Snežana R. Grujić2
1Institute for the Technology of Nuclear and Other Mineral Raw Materials, Belgrade, Serbia, 2Faculty of Technology and Metallurgy, University of Belgrade, Belgrade, Serbia
P.S.90.
Biological and bioinspired structures for multispectral surveillance
Danica Pavlović1, Hrvoje Skenderović2, Mario Rakić2, Stefan Dikić3, Dejan Pantelić4
1Institute of Physics Belgrade, University of Belgrade, Serbia, 2Institute of Physics Zagreb, Zagreb, Croatia, 3Faculty of Technology and Metallurgy, University of Belgrade, Serbia, 4Senzor Infiz doo, Zemun, Belgrade, Serbia
P.S.91.
Fabrication of electrochemical immunosensors based on ZnO nanostructures
Anton Popov, Arnas Treimakas, Egita Baneviciute, Viktorija Liustrovaite, Benediktas Brasiunas, Maria Teresa Giardi, Donats Erts, Arunas Ramanavicius, Almira Ramanaviciene
NanoTechnas-Center of Nanotechnology and Materials Science, Faculty of Chemistry and Geosciences, Vilnius University, Lithuania.
P.S.92.
AgNPs stability after different post treatment
Yevheniia Husak1,2, Sergiy Kyrylenko1, Olesia Tverezovska1, Oksana Petričenko3, Viktoriia Holubnycha1, Rafal Banasiuk4, Viktoriia Korniienko1,3
1Sumy State University, Sumy, Ukraine, 2Silesian University of Technology, Gliwice, Poland, 3University of Latvia, Riga, Latvia, 4NanoWave, Wroclaw, Poland
P.S.93.
The effect of anticeptic cationic gemini surfactant decamethoxin on the keto-enol tautomerism of curcumin in the preparation of nanobiocomposites
Olga Kazakova, Valentyna Barvinchenko, Natalia Lipkovska
Chuiko Institute of Surface Chemistry, NAS of Ukraine, Kyiv, Ukraine
P.S.94.
Cell toxicity and antibacterial properties of NiTi metal alloy after plasma electrolytic oxidation
Yuliia Varava1,2, Volodymyr Deineka1,3, Valeriia Korniienko1, Kateryna Diedkova1,3, Viktoriia Korniienko1,3, Aleksandra Franielczyk², Natalia Walosczyk², Maksym Pogorielov1,3, Wojciech Simka²
1Sumy State University, Sumy, Ukraine, 2Silesian University of Technology, Gliwice, Poland, 3University of Latvia, Riga, Latvia, 4Materials Research Center LTD, Kyiv, Ukraine
P.S.95.
Towards new approaches for ultraviolet sterilization of MXenes
Yuliia Varava1,2, Volodymyr Deineka1,3, Valeriia Korniienko1, Kateryna Diedkova1,3, Viktoriia Korniienko1,3, Veronika Zahorodna4, Oleksiy Gogotsi4, Maksym Pogorielov1,3
1Sumy State University, Sumy, Ukrain,; 2Silesian University of Technology, Gliwice, Poland, 3University of Latvia, Riga, Latvia, 4Materials Research Center LTD, Kyiv, Ukraine
P.S.96.
Effect of various supported catalysts on selectivity and conversion of biomass-derived glycolic acid
Aleksa Kojčinović1, Florian M. Harth1,2, Blaž Likozar1, Miha Grilc1
1Department of Catalysis and Chemical Reaction Engineering, National Institute of Chemistry, Ljubljana, Slovenia, 2Institute of Chemical Technology, Universität Leipzig, Leipzig, Germany
P.S.97.
Corrosion and scratch resistance of the nanotube layer formed on the titanium-based materials
Dragana R. Mihajlović1, Marko P. Rakin1, Jelena B. Bajat1, Bojan I. Medjo1, Veljko R. Đokić2
1University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia, 2Innovation Centre of the Faculty of Technology and Metallurgy in Belgrade, Belgrade, Serbia
P.S.98.
Alginate/pectin beads with self-emulsifying system for controlled release of natural lipophilic molecules
Martina Urbanova1, Miroslava Pavelkova2, Katerina Kubova2, Ivana Sedenkova1, Jan Macku1,2, Jiri Brus1
1Department of NMR spectroscopy, Institute of Macromolecular Chemistry, Czech Academy of Sciences, Czech Republic, 2Department of Pharmaceutical Technology, Faculty of Pharmacy, Masaryk University Brno, Czech Republic
P.S.99.
Material analysis using accelerated ion beams
Primož Vavpetič, Žiga Šmit, Esther Punzon-Qujiorna, Sabina Markelj, Mitja Kelemen, Primož Pelicon
Jožef Stefan Institute, Ljubljana, Slovenia.
P.S.100.
Composite scaffolds for regenerative dentistry applications
Abdulrraouf Taboun1, Marija N. Jovanović1, Miloš M. Petrović1, Ivan D. Pesić2, Radmila M. Jančić-Heinemann1, Dušica B. Stojanović1, Petar S. Uskoković1, Vesna J. Radojević1
1University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia, 2University of Belgrade, Institute of Chemistry, Technology and Metallurgy, Belgrade, Serbia.
P.S.101.
Exploring the potential of 4D bioprinting of smart PLGA-PEG-PLGA based hydrogel for personalized medicine
Klára Lysáková1, Martin Sahuľ2, Anna Finne-Wistrand3, Lucy Vojtová1
1Brno University of Technology, CEITEC-Central European Institute of Technology, Advanced Biomaterials, Brno, Czech Republic, 2Brno University of Technology, Faculty of Chemistry, Brno, Czech Republic, 3KTH Royal Institute of Technology, Division of Polymer Technology, Stockholm, Sweden
P.S.102.
Dielectrophoretic manipulation of MXenes flakes
Tudor Alexandru Filip1,2, Tăchiță Vlad-Bubulac3, Ina Turcan1, Marius Olariu1
1Technical University of Iasi, Faculty of Electrical Engineering, Bld. Prof.dr.doc. D. Mangeron, Iasi, Romania, 2Academy of Romanian Scientists, Bucharest, Romania,3“Petru Poni” Institute of Macromolecular Chemistry, Iasi, Romania
Second Oral Session, Main Conference Hall
10.00-12.45 Chairpersons: Patrick Gane, Ewa Mijowska
YUCOMAT SYMPOSIUM A:
ADVANCED METHODS IN SYNTHESIS AND PROCESSING OF MATERIALS
10.00-10.15 O.S.22.
Driving nanohybrid synthesis and hierarchical assembly at interfaces with surface chemistry anisotropy
Eric H. Hill, Sanjay Jatav, Junying Liu, Marcel Herber
University of Hamburg, Institute of Physical Chemistry, Hamburg, Germany and The Hamburg Center for Ultrafast Imaging (CUI), Hamburg, Germany
10.15-10.30 O.S.23.
Mechanical strength and impact toughness of additively manufactured SA508 Gr.3 steel for nuclear reactor applications
Chang Kyu Rhee1, Young-Bum Chun1, Suk Hoon Kang1, Wonjong Jeong2, Taegyu Lee3, Hongmul Kim4, Seongjin Yoo4, Chang Hyoung Yoo4, Ho Jin Ryu2,3
1Korea Atomic Energy Research Institute, Yuseong-gu, Daejeon, 34057, Republic of Korea, 2Department of Nuclear and Quantum Engineering, KAIST, Yuseong-gu, Daejeon, Republic of Korea, 3Department of Materials Science and Engineering, KAIST, Yuseong-gu, Daejeon, Republic of Korea, 4Advanced powder technology team, HANA AMT, Cheongwon-gu, Cheongju-si, Republic of Korea
10.30-10.45 O.S.24.
Synthesis and luminescent properties of “ZnO-polymer” nanoparticles
Tetiana Voitenko1, Igor Fesych1, Oksana Chukova1,2, Sergiy A. Nedilko1
1Taras Shevchenko National University of Kyiv, Ukraine, 2Deutsches Elektronen-Synchrotron DESY, Hamburg, Germany
10.45-11.00 O.S.25.
Wireless electrochemical processes on two-dimensional materials
Mohsen Beladi-Mousavi1,2, Alexander Kuhn1
1Univ. Bordeaux, CNRS, Bordeaux INP, ISM, UMR, Pessac, France, 2Nanoinstitute Munich, Faculty of Physics, Ludwig-Maximilians-Universität München, Munich, Germany
11.00-11.15 O.S.26.
Influence of sintering conditions on microstructure topology in YSZ ceramic
Marek Faryna
Institute of Metallurgy and Materials Science, Polish Academy of Sciences, Kraków, Poland
YUCOMAT SYMPOSIUM B:
ADVANCED MATERIALS FOR HIGH-TECHNOLOGYAPPLICATION
11.15-11.30 O.S.27.
Borophene oxide with tuned chemical structure for energy related study
Ewa Mijowska, Klaudia Maslana, Krzysztof Sielicki, Klaudia Zielinkiewicz, Anna Dymerska, Tomasz Kędzierski, Beata Zielinska
West Pomeranian University of Technology, Szczecin Faculty of Chemical Technology and Engineering, Department of Nanomaterials Physicochemistry, Szczecin, Poland
11.30-11.45 O.S.28.
Contrasting bulk to superlattice claddings in interband cascade lasers
Borislav Petrović1, Andreas Bader1, Fauzia Jabeen1, Fabian Hartmann1, Robert Weih2, Sven Höfling1
1Julius-Maximilians-Universität Würzburg, Physikalisches Institut, Lehrstuhl für Technische Physik, Am Hubland, Würzburg, Deutschland, 2Nanoplus Nanosystems and Technologies GmbH, Gerbrunn, Germany
11.45-12.00 O.S.29.
High-entropy alloys with the supersilent microstructure
Andreja Jelen, Jože Luzar, Stanislav Vrtnik, Primož Koželj
Condensed Matter Physics Department, Jožef Stefan Institute, (Ljubljana), Slovenia
12.00-12.15 O.S.30.
Fracture pecularities of shape memory alloy at various frequencies of fatigue loading
Halyna Krechkovska1, Volodymyr Iasnii2, Oleksandra Student1, Volodymyr Budz2
1Karpenko Physico-Mechanical Institute of the National Academy of Sciences of Ukraine, Lviv, Ukraine, 2Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine
12.15-12.30 O.S.31.
Sodium-ion storage mechanism investigation of vine shoots-derived hard carbon
Jana Mišurović1, Aleksanda Gezović1, Blaž Tratnik2, Alen Vižintin2, Veselinka Grudić1, Robert Dominko2, Milica Vujković3
1University of Montenegro, Faculty of Metallurgy and Technology, Podgorica, Montenegro, 2National Institute of Chemistry, Ljubljana 1000, Slovenia, 3University of Belgrad, Faculty of Physical Chemistry, Belgrade, Serbia
12.30-12.45 O.S.32.
Core issues of the sol-gel process for designing a high-quality polyanionic Na4Fe3(PO4)2(P2O7) phase
Milica Vujković1, Aleksandra Gezović2, Danica Bajuk-Bogdanović1, Slavko Mentus1,3
1University of Belgrade, Faculty of Physical Chemistry, Belgrade, Serbia, 2University of Montenegro, Faculty of Metallurgy and Technology, Podgorica, Montenegro, 3Serbian Academy of Sciences and Arts, Belgrade, Serbia
14.00 Boat-trip around Boka Kotorska Bay