P.S.A.1. Plasma assisted strategies for advanced synthesis and processing of materials
Siavash Assadolahi^1,2, Daniele Benetti³, Claude Côté¹, Ryan Porter¹, Sean Wolfe¹, Fabian Ambriz Vargas³,  , Diego Mantovani⁴, Andreas Ruediger³, Luc Stafford², Andranik Sarkissian^1
1Plasmionique Inc, Varennes, QC, Canada;
²University of Montreal, QC, Canada;
³INRS-EMT, Varennes, QC, Canada,
⁴Biomaterials Engineering Unit, Saint-François d’Assise Hospital, Laval University, QC, Canada 

P.S.A.2. Polimorphous transformations in mechanoactivated molecular crystals
Dmitriy S. Rybin¹, Grigoriy N. Konygin¹, Kirill N. Susloparov², Alla A. Zhygalova^2
1The Udmurt Federal Research Center of the Ural Branch of the Russian Academy of Sciences,  Physical-Technical Institute, Laboratory of Mechanoactivation of Organic Systems, Izhevsk, RU;
²Mezomax Inc, San Francisco, USA

P.S.A.3. Microstructure development of the Cu-Ti-TiB₂ composite obtained by laser sintering
Jelena Stašić, Dušan Božić  
Centre of Excellence-CextremeLab, Institute of Nuclear Sciences “Vinča”, University of Belgrade, Mike Petrovića Alasa 12-14, PO Box 522, 11001 Belgrade, Serbia

P.S.A.4. Anomalous electron pulse annealing in Ti implanted GaP
Zbigniew Werner¹, Marek Barlak¹, Alexey Markov², Dmitry Proskurovsky², René Heller^3
1National Centre for Nuclear Research, Otwock, Poland;
²High Current Electronics, Institute, Tomsk, Russia;
³Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany

P.S.A.5. The effect of nitrogen ion implantation on the properties of WC-Co composites used in wood-based materials machining
Jacek Wilkowski¹, Marek Barlak², Roman Böttger³, Zbigniew Werner², Joanna Wachowicz¹, Paweł Czarniak^{1  
1}Warsaw University of Life Sciences - SGGW, Faculty of Wood Technology, Department of Mechanical Processing of Wood, Warsaw, Poland;
²National Centre for Nuclear Research Świerk - NCBJ, Plasma and Ion Technology Division (FM2),  
Otwock, Poland,
³Helmholtz-Zentrum Dresden-Rossendorf, Institute of Ion Beam Physics and Materials Research, Ion Beam Center, Dresden, Germany

P.S.A.6. Shungite – a Russian mineral: possible application as a microwave absorber
Nina Obradović¹, Mihajlo Gigov², Aleksandar Đorđević³, Frank Kern⁴,  
Svetlana Dmitrović⁵, Branko Matović⁵, Antonije Đorđević^6,7, Vladimir Pavlović^1
1Institute of Technical Sciences of SASA, Knez Mihailova 35/IV, 11000 Belgrade, Serbia;
²Mining Institute Ltd., Batajnički put 2, 11080 Belgrade, Serbia;
³Faculty of Science, Department of Chemistry, Biochemistry and Environmental Protection, University of Novi Sad, Trg Dositeja Obradovica 3, 21000 Novi Sad, Serbia;
⁴Universität Stuttgart, Institut für Fertigungstechnologie keramischer Bauteile (IFKB), D- 70567 Stuttgart, Germany;
⁵University of Belgrade, Vinča Institute of Nuclear Sciences, Mike Petrovića Alasa 12-14, 11000 Belgrade, Serbia;
⁶School of Electrical Engineering, University of Belgrade, Bulevar kralja Aleksandra 73, 11000 Belgrade, Serbia;
⁷Serbian Academy of Sciences and Arts, Knez Mihailova 35, 11000 Belgrade, Serbia  

P.S.A.7. Sintering of alumina doped with different oxides, followed by sensitive dilatometer  
Suzana Filipović¹, Nina Obradović¹, Smilja Marković¹, Antonije Đorđević^2,3, Aleksandra Dapčević⁴, Jelena Rogan⁴, Vladimir Pavlović^4
1Institute of Technical Sciences of SASA, Knez Mihailova 35/IV, 11000 Belgrade Serbia;
²School of Electrical Engineering, University of Belgrade, Bulevar kralja Aleksandra 73, 11000 Belgrade, Serbia;
³Serbian Academy of Sciences and Arts, Knez Mihailova 35, 11000 Belgrade, Serbia;
⁴Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11120 Belgrade, Serbia

P.S.A.8. Ni_1-xMo_x dispersed alloys: synthesis and catalytic properties in 1,2-dichloroethane decomposition process
Yuliya V. Rudneva¹, Yury V. Shubin¹, Pavel E. Plyusnin¹,Yurii I. Bauman², Ilya V. Mishakov^2
1Nikolaev Institute of Inorganic Chemistry SB RAS, Novosibirsk, Russia;
²Boreskov Institute of Catalysis SB RAS, Novosibirsk, Russia

P.S.A.9. The influence of the method of preparation and temperature of thermal treatment on the phase composition of the NiO-Al₂O₃ catalyst using the X-ray diffraction method  
Matilda M. Lazić
Technical College of Applied Sciences in Zrenjanin, Zrenjanin, Serbia

P.S.A.10. Chalcogenides of niobium and molybdenum with stoichiometry metal: chalcogen = 2:3
M.N. Kozlova¹, A.N. Enyashin², E.D. Grayfer¹, V.E. Fedorov^1
1Nikolaev Institute of Inorganic Chemistry SB RAS, Novosibirsk, Russia;
²Institute of Solid State Chemistry UB RAS, Ekaterinburg, Russia

P.S.A.11. Crystallographic structure of electron pulse annealed GaP implanted with Ti
Marek Barlak¹, Zbigniew Werner¹, Alexey Markov², Dmitry Proskurovsky², René Heller^3
1National Centre for Nuclear Research, Otwock, Poland;
²High Current Electronics Institute, Tomsk, Russia; ³Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany

P.S.A.12. The influence of boron on synthesis and characteristics of PM copper-zirconium alloys
Dušan Božić, Jelena Stašić, Jovana Ružić
Centre of Excellence-CextremeLab, Institute of Nuclear Sciences “Vinča”, University of Belgrade, Mike Petrovića Alasa 12-14, PO Box 522, 11001 Belgrade, Serbia

P.S.A.13. Synthesis and structure of Zinc(II) complex with 2-acetylpyridine - aminoguanidine
Mirjana M. Radanović¹, Ljiljana S. Vojinović-Ješić¹, Marko V. Rodić¹, Željko K. Jaćimović², Katalin Mészáros Szécsényi^1
1University of Novi Sad, Faculty of Sciences, Department of Chemistry, Biochemistry and Environmental Protection, Novi Sad, Serbia;
²University of Montenegro, Faculty of Metallurgy and Technology, Podgorica, Montenegro

P.S.A.14. Influence of boron on modified characteristics of iron-based alloys with particular reference to boronizing
Andjelka Milosavljević¹, Radica Prokić-Cvetković¹, Zoran Radaković¹, Aleksandar Jovović¹, Vuk Adžić¹, Zoran Marković^2
1 University of Belgrade, Faculty of Mechanical Engineering, Belgrade, Serbia;
² University of Belgrade, Faculty of Economics, Belgrade, Serbia

P.S.B.1. Autowaves of localized plastic deformation in a material with an unstable phase structure
Vladimir I. Danilov, Vadim V. Gorbatenko, Dina V. Orlova, Lidia V. Danilova
Institute of Strength Physics and Materials Science of Siberian Branch of Russian Academy of Sciences, Russia

P.S.B.2. High temperature stability of YSZ and Mullite-YSZ coatings deposited by atmospheric plasma spraying  
David Jech¹, Pavel Komarov², Karel Slámečka¹, Michaela Remešová¹, Lucie Dyčková¹, Ladislav Čelko^1
1Brno University of Technology, CEITEC – Central European Institute of Technology, Materials Characterization and Advanced Coatings, Brno, Czech Republic;
²Novosibirsk State Technical University, Faculty of Mechanical Engineering and Technologies, Novosibirsk, Russia

P.S.B.3. Barium-Magnesium-Aluminium-Silicate Environmental Barrier Coatings: Powder Manufacturing and Plasma Spraying
Lenka Klakurková, Ladislav Čelko, David Jech, Michaela Remešová, Martin Juliš, Pavel Gejdoš, Karel Slámečka
Brno University of Technology, CEITEC, Materials Characterization and Advanced Coatings, Brno, Czech Republic

P.S.B.4. Magnetic and mechanical properties of nickel-based superalloy after laser induced deformation
Anđelka Milosavljević¹, Suzana Polić², Milesa Srećković³, Sanja Petronić⁴, Darko Vasiljević⁵, D.Bekrić¹, Dušan Nasradin^5
1University of Belgrade, Faculty of Mechanical Engineering, Belgrade, Serbia;
²Central Institute for Conservation, Belgrade, Serbia;
³University of Belgrade, Faculty of Electrical Engineering, Belgrade, Serbia;
⁴University of Belgrade, Institute of Nuclear Science Vinca, Belgrade, Serbia;
⁵Institute of Physics, Belgrade, Serbia

P.S.B.5. Influence of diffusion coatings on magnetic properties of 41CrMo₄ steel
Zina Pavloušková¹, David Jech¹, Ladislav Čelko¹, Rostislav Huzlík ², Tomáš Bulín ², Lenka Klakurková¹, Jiří Švejcar¹, Jozef Kaiser^1
1Brno University of Technology, CEITEC, Materials Characterization and Advanced Coatings, Brno, Czech Republic;
²Brno University of Technology, Faculty of Electrical Engineering and Communication, Dept. of Electrical Engineering, Brno, Czech Republic

P.S.B.6. Electrical and magnetic properties of multiferroic BiFeO₃-based flexible composites
Nikola I. Ilić, Guilhermina F. Teixeira, Jelena D. Bobić, Mirjana M. Vijatović Petrović, Adis. S. Džunuzović, Maria A. Zaghete, Biljana D. Stojanović
University of Belgrade, Institute for Multidisciplinary Research, Materials science department, Belgrade, Serbia;
State University of Sao Paulo, Chemistry Institute, Araraquara, Sao Paulo, Brasil

P.S.B.7. Characterization of different MMC coatings deposited by PTA and FS processes Vesna M. Maksimović¹, Aleksandar M. Maslarević², Gordana M. Bakić³, Miloš B. Đukić³, Bratislav M. Rajičić³, Vladimir D. Pavkov^1
1University of Belgrade, Vinča, Institute of Nuclear Sciences, Belgrade, Serbia;
²University of Belgrade, Innovation Center, Faculty of Mechanical Engineering, Belgrade, Serbia;
³University of Belgrade, Faculty of Mechanical Engineering, Belgrade, Serbia

P.S.B.8. Determination of ceramic proppant impact on efficiency of shale gas production and the environment
Joanna Szymanska, Pawel Wisniewski, Jaroslaw Mizera  
Warsaw University of Technology, Faculty of Materials Science and Engineering, Warsaw, Poland

P.S.B.9. Temperature dependence of thermal conductivity of graphene monolayer in the framework of debay and calawey models  
Stevo Jaćimovski¹, Dejan Raković^{2  
1}Academy of Criminalistic and Police Studies, Belgrade, Serbia;
²University of Belgrade, Faculty of Electrical Engineering, Serbia

P.S.B.10.  Cup anemometer tribology and revised IEC standard
Ivan Popović, Miodrag Zlatanović
University of Belgrade, School of Electrical Engineering, Serbia

P.S.B.11.  Prediction of new B₆O structures and their properties using ab initio data mining approach
Jelena Zagorac^1,2, Dejan Zagorac^1,2, Dragana Jordanov¹, Milena Rosić¹, Maria Čebela¹, Jelena Luković^1,2, Branko Matović^1,2
1Institute of Nuclear Sciences Vinča, Materials Science Laboratory, Belgrade University, Belgrade, Serbia;
²Center for synthesis, processing and characterization of materials for application in the extreme conditions-CextremeLab, Belgrade, Serbia

P.S.B.12.  Impact of thickness on properties of high-entropy and conventional metallic glasses
Ramir Ristić¹, Ahmed Kuršumović², Ignacio A. Figueroa³, Emil Babić^4
1Department of Physics, University of Osijek, Trg Ljudevita Gaja 6, HR-3100 Osijek, Croatia;
²Department of Materials Science, Cambridge University, Pembroke Street, Cambridge CB2 3QZ, UK;
³Institute for materials research-UNAM, Ciudad Universitaria Coyoacan, C.P. 04510 Mexico D.F., Mexico;
⁴Department of Physics, Faculty of Science, Bijenička cesta 32, 10002 Zagreb, Croatia

P.S.B.13.  Crystal structure and X-Ray spectroscopic properties of R.E.2Ni12P5 compounds
Ivan D. Shcherba¹, Henrik Noga², Viktor N. Antonov³, Olga V. Zhak¹, Dragan Uskokovic⁴, Bohdan M. Jatcyk^5
1Ivan Franko National University of Lviv, Ukraine;
²Institute of Technology, the Pedagogical University of Cracow, Podchorazych st. 2 Cracow 30-084 Poland;
³Institute of Physics of Metals, NASU, Kyiv, Ukraine;
⁴Institute of Technical Sciences of SASA Knez Mihailova 35/IV, PO Box 377 11000 Belgrade, Serbia;
⁵Lviv National University of Veterinary Medicine and Biotechnologies, Lviv, Ukraine

P.S.B.14. Study of the interaction between graphene oxide and 12-tungstophosphoric acid in their nanocomposite
Željko Mravik¹, Danica Bajuk-Bogdanović², Smilja Marković³, Janez Kovač⁴, Ivanka Holclajtner-Antunović², Zoran Jovanović^1
1University of Belgrade, Vinča Institute of Nuclear Sciences, Laboratory of Physics, Belgrade, Serbia;
²University of Belgrade, Faculty of Physical Chemistry, Belgrade, Serbia;
³Institute of Technical Sciences of SASA, Belgrade, Serbia;
⁴Jožef Stefan Institute, Department of Surface Engineering and Optoelectronics,  Ljubljana, Slovenia

P.S.B.15. Transport coefficients of Ar⁺ in BF₃ gas
Željka D. Nikitović, Vladimir D. Stojanović, Zoran M. Raspopović
Institute of Physics, University of Belgrade, Pregrevica 118, Belgrade, Serbia

P.S.B.16. The influence of basalt content on the properties of austenitic stainless steel 316L
Vladimir D. Pavkov¹, Gordana M. Bakić², Vesna Maksimović¹, Branko Matović¹, Tatjana Volkov-Husović^3
1University of Belgrade, Vinca Institute of Nuclear Sciences, Belgrade, Serbia.
²University of Belgrade, Faculty of Mechanical Engineering, Belgrade, Serbia.
³University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia

P.S.B.17.  Comparative study on noble metal based nanocatalysts on different supports for low temperature fuel cells application
Ljiljana M. Gajić Krstajić¹, Velimir R. Radmilović^2,6, Peter Ercius³, Borka M. Jović⁴, Vladimir D. Jović⁴, Piotr Zabinski⁵, Nevenka R.Elezović^4
1Institute of Technical Sciences SASA, Knez Mihajlova 45, 11000 Belgrade, Serbia;
²Faculty of Technology and Metallurgy University of Belgrade, Karnegijeva 4, Belgrade;
³National Center for Electron Microscopy, LBNL University of California, Berkeley, USA;
⁴Institute for Multidisciplinary Research University of Belgrade, P.O. Box 33, 11030 Belgrade, Serbia;
⁵AGH University of Science and Technology, Faculty of Non-Ferrous Metals, Al. Mickiewicza 30, Krakow, Poland;
⁶Serbian Academy of Sciences and Arts, Knez Mihailova 35, 11000 Belgrade, Serbia

P.S.B.18. Experimental study of drying process of porous materials
Abdulhamied Twier¹, Elhassen Ali A. Omer², Ramadan A. Almadani³, Mustafa  Jarnaz⁴, Abdurrahman Houssein^5
1Industrial Authority, Tripoli, Libya;
²Mechanical Engineering department, Engineering faculty, Zawia University, Zawia, Libya;
³Libyan Authority for Research of Natural Science and Technology, Tripoli, Libya;
⁴Libyan Academy for Higher Studies, Tripoli, Libya;
⁵Faculty of Engineering, Zintan University, Zintan, Libya

P.S.C.1. Production of synthesis gas by carbon dioxide over catalytically active molybdenum based carbide and nitride nanowires
Mrzel Aleš¹, Damjan Vengust¹, Janez Kovač¹, Venkata Dasireddy², Blaž Likozar^2
1Jozef Stefan Institute, Jamova 39, 1000 Ljubljana, Slovenia;
²National Institute of Chemistry, Hajdrihova 19, 1000 Ljubljana, Slovenia

P.S.C.2. Nanofibrous polyaniline preparation by the oxidative polymerization of aniline with the oxidant in excess: Raman and FTIR spectroscopy study
Jana Mišurović, Gordana Ćirić-Marjanović
University of Belgrade, Faculty of Physical Chemistry, Studentski trg 12-16, 11158 Belgrade, Serbia

P.S.C.3. One-pot synthesis of biocompatible NaYF₄:Yb,Er nanoparticles for cell labeling
Ivana Dinić¹, Marina Vuković¹,  Lidija Mančić², Aleksandar Krmpot³, Olivera Milošević^2
1Innovation Center of the Faculty of Chemistry, University of Belgrade, Serbia;  
²Institute of Technical Sciences of SASA, Belgrade, Serbia;
³Photonic Center, Institute of Physics Belgrade, University of Belgrade, Belgrade, Serbia

P.S.C.4. Shape-controlled synthesis of CeO₂ nanoparticles: effects of different precursors on the formation of oxygen vacancies
Igor Đerđ¹, Jelena Bijelić¹, Chenwei Li^2,3, Bernd Smarsly², Herbert Over^2
1Department of Chemistry, Josip Juraj Strossmayer University of Osijek, Cara Hadrijana 8/A, 31000 Osijek, Croatia;
²Physikalisch-Chemisches Institut, Justus-Liebig-Universität, Heinrich-Buff-Ring 17, 35392 Gießen, Germany;
³Key Laboratory for Advanced Materials, Research Institute of Industrial Catalysis, School of Chemistry and Molecular Engineering, East China University of Science and Technology, Shanghai 200237, China

P.S.C.5. Characterization of mechanochemically synthesized CuInS₂/ZnS nanocomposite
Erika Dutková¹, Nina Daneu², Zdenka Bujňáková¹, Matej Baláž¹, Jaroslav Kováč³, Jaroslav Kováč Jr. ^{3  
1}Institute of Geotechnics, Slovak Academy of Sciences, 04001 Košice, Slovakia;
²Jožef Stefan Institute, Department for Nanostructured Materials, Ljubljana, SI-1000, Slovenia;
³Institute of Electronics and Photonics, Slovak University of Technology, 81219 Bratislava, Slovakia

P.S. C.6. Preparation and characterization of nanostructured silver supported on carbonaceous material obtained by hydrothermal carbonization process
Branka V. Kaluđerović¹, Vesna Lj. Mandušić², Đuro M. Čokeša³, Jelena Hranisavljević², Srđan Đ. Milanović¹, Zlatko LJ. Rakočević^4
1University of Belgrade, Serbia, INN Vinča, Center for the synthesis, processing and characterization of materials for use in extreme conditions, Belgrade, Serbia;
²University of Belgrade, Serbia, INN Vinča,Laboratory of Radiobiology and Molecular Genetics;
³University of Belgrade, Serbia, INN Vinča, Laboratory of Chemical Dynamics and Permanent Education;
⁴University of Belgrade, Serbia, INN Vinča, Laboratory of Atomic Physics, Serbia

P.S.C.7. Morphological, microstructural and magnetic characteristics of  electrodeposited Ni-Fe-W-Cu alloy powders
Tomislav Trišović, Miroslav Spasojević, Aleksa Maričić, Milica Spasojević    
Institute of Technical Sciences of Serbian Academy of Science and Arts, Belgrade, Serbia;
Joint Laboratory for Advanced Materials of SASA, Section for Amorphous Systems;
Faculty of Technical Sciences, Čačak, University of Kragujevac, Čačak, Serbia;
Faculty of Chemistry, University of Belgrade, Belgrade, Serbia

P.S.C.8. Adsorption of arsenic(III) from aqueous solution on carbon cryogel and carbon cryogel/ceria composite
Tamara Z. Minović Arsić¹, Ana M. Kalijadis¹, Bojan M. Jokić², Milovan M. Stoiljković¹, Biljana M. Babić^{3  
1}University of Belgrade, Vinča Institute of Nuclear Sciences, Belgrade, Serbia;
²University of Belgrade, Faculty of Applied Arts, Belgrade, Serbia;
³University of Belgrade, Institute of Physics Belgrade, Belgrade, Serbia

P.S.C.9. Peculiar optical features of molecular crystalline films
Jovan P. Šetrajčić^1,2, Igor J. Šetrajčić¹, Ana J. Šetrajčić–Tomić^{3  
1}University of Novi Sad, Faculty of Sciences, Department of Physics, Novi Sad, Vojvodina, Serbia;
²University “Union – Nikola Tesla”, Faculty of Sports, Novi Beograd, Vojvodina, Serbia; ³University of Novi Sad, Faculty of Medicine, Department of Pharmacy, Novi Sad, Vojvodina, Serbia

P.S.D.1. Lipid production with a high palmitoleic acid content by Debaryomyces globosus yeast under conditions of continuous cultivation
Nadezda N. Stepanova¹, Grigorii I. Morgunov², and Svetlana V. Kamzolova^1
1G.K. Skryabin Institute of Biochemistry and Physiology of Microorganisms, Russian Academy of Sciences, Pushchino, Moscow region, 142290, Russia;
²Peoples’ Friendship University of Russia (RUDN University), Moscow, 117198, Russia

P.S.D.2. New multifunctional materials based on steel slag
Ivana Milašević¹, Ljubica Ivanović¹, Irena Nikolić^1,2, Dijana Đurović², Smilja Marković³, Vuk Radmilović⁴,Velimir Radmilović^5,6
1Institut of Public Health of Montenegro, Podgorica, Montenegro;
²University of Montenegro, Faculty of Metallurgy and Technology, Podgorica,Montenegro;
³Institute of Technical Sciences of SASA, Belgrade, Serbia;
⁴Innovation Center, University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia;
⁵Serbian Academy of Sciences and Arts, Belgrade, Serbia;
⁶Faculty of Technology and Metallurgy University of Belgrade, Karnegijeva 4, Belgrade

P.S.D.3. Biological markers of the petroleum alkane fraction as a forensic tool for determining the presence of petroleum pollutants in the environment
Nada Vidović¹, Ivan Samelak¹, Milica Balaban¹, Mališa Antić², Tatjana Šolević-Knudsen³, Branimir Jovančićević^4
1University of Banja Luka, Faculty of Natural Sciences and Mathematics, 78000 Banja Luka, Bosnia and Herzegovina;
²University in Belgrade, Faculty of Agriculture, 11080, Belgrade, Serbia;
³University of Belgrade, Center of Chemistry, Institute of Chemistry, Technology and Metallurgy, 11000 Belgrade, Serbia;
⁴University of Belgrade, Faculty of Chemistry, 11001 Belgrade, Serbia

P.S.E.1. Addition of porogens improved the characteristics of biodegradable implants made of poly(ε-caprolactone)/calcium phosphate ceramic composites
Chang-Chin Wu^1,2, Kai-Chiang Yang^3,4, Feng-Huei Lin^5
1Department of Orthopedics, En Chu Kong Hospital, New Taipei City, Taiwan;
²Department of Orthopedics, National Taiwan University Hospital, College of Medicine, National Taiwan University, Taipei, Taiwan;
³Department of Organ Reconstruction, Institute for Frontier Medical Sciences, Kyoto University, Kyoto, Japan;
⁴School of Dental Technology, College of Oral Medicine, Taipei Medical University, Taipei, Taiwan;
⁵Ins. of Biomed. Eng., National Taiwan University, Taiwan

P.S.E.2. The application of hydroxyapatite as the Bletilla striata polysaccharide  carrier for sarcopenia treatment
Ya-Jyun Liang¹, Jia-Yu Hong¹, Chun-Han Hou², Feng-Huei Lin^1
1National Taiwan University, Institute of Biomedical Engineering, Taipei, Taiwan;
²National Taiwan University Hospital, Department of orthopedic surgery, Taipei, Taiwan

P.S.E.3. Hydroxyapatite/gelatin particles embedding stromal cell-derived factor-1 for bone tissue engineering
Chih Hsiang Fang¹, Yi Wen Lin¹, Jui Sheng Sun², Feng Huei Lin ^1,3
1Institute of Biomedical Engineering, College of Medicine and College of Engineering, National Taiwan University, Taipei 100, Taiwan;
²Department of Orthopedic Surgery, National Taiwan University Hospital, Taiwan;
³Division of Biomedical Engineering and Nanomedicine Research, National Health Research Institutes, Miaoli 350, Taiwan

P.S.E.4. A novel multilayer capsule as desensitizing agent for dental hypersensitivity
Kuo-Hui Chiu¹, Hsiu-Min Chen¹, Yuan-Yu Hsia¹, Ting-Ru Chung², Chih-Yu Shu³, Chia-Yung Lin⁴, Cherng-Jyh Ke^1,3
1China Medical University, College of Biopharmaceutical and Food Sciences, Department of Biological Science and Technology, Taichung, Taiwan;
²China Medical University, College of Medicine, Department of Biomedical Imaging and Radiological Science, Taichung, Taiwan;
³China Medical University Hospital, Biomaterial Translational Research Center, Taichung, Taiwan;
⁴Taichung Hospital, Ministry of Health and Welfare, Department of Dentistry, Taichung, Taiwan

P.S.E.5. Electrospun silk fibroin composite scaffold for tendon repair
Yi-You Huang
Institute of Biomedical Engineering, National Taiwan University, Taipei, Taiwan.

P.S.E.6. BMP-2 and insulin delivered from plasma synthesis of carbon-based nanocarriers for bone regeneration
Yi Wen Lin¹, Chih Hsiang Fang¹, Jui Sheng Sun², Feng Huei Lin^1,3
1Institute of Biomedical Engineering, College of Medicine and College of Engineering, National Taiwan University, Taipei 100, Taiwan;
²Department of Orthopedic Surgery, National Taiwan University Hospital, Taiwan;
³Division of Biomedical Engineering and Nanomedicine Research, National Health Research Institutes, Miaoli 350, Taiwan

P.S.E.7. Rare earth dual-doped multifunctional hydroxyapatite particles for potential application in preventive medicine
Nenad Ignjatović¹, Lidija Mančić¹, Zoran Stojanović¹, Marko Nikolić², Srečo Škapin³, Ljiljana Veselinović¹, Dragan Uskoković^1
1Institute of Technical Sciences of the Serbian Academy of Science and Arts, Knez Mihailova 35/IV, P.O. Box 377, 11000 Belgrade, Serbia;
²Photonic Center, Institute of Physics Belgrade, University of Belgrade, Zemun, Belgrade, Serbia;
³Jožef Stefan Institute, Jamova 39, 1000 Ljubljana, Slovenia

P.S.E.8. The processing and application of modified dental composites and dental inserts based on Mg-doped HAp
Đorđe Veljović¹, Tamara Matić¹, Giuma Ayoub¹, Maja Ležaja Zebić², Vesna Miletić², Rada Petrović¹, Đorđe Janaćković^1
1University of Belgrade, Faculty of Technology and Metallurgy, Department of Inorganic Chemical Technology, Karnegijeva 4, 11120 Belgrade, Serbia,
²University of Belgrade, School of Dental Medicine, DentalNet Research Group, Rankeova 4, Belgrade, Serbia.

P.S.E.9. Hybrid dental composites with improved mechanical properties
Abdulsalam. A. Elmadani¹, Ivana M. Radović², Marija N. Radojević¹, Miloš Petrović¹, Dušica. B. Stojanović¹, Petar S. Uskoković¹, Vesna J. Radojević^1
1University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia^;
2University of Belgrade, Vinča Nuclear Institute, Belgrade, Serbia

P.S.E.10. Biomimetic evaluation of novel β-TCP/alginate macroporous scaffolds in perfusion bioreactors for potential in bone tissue engineering
Nataša Stanojević, Milica Andrejević, Jovana Zvicer, Jasmina Stojkovska, Đorđe Veljović, Bojana Obradović
University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia
Innovation Center of the Faculty of Technology and Metallurgy, Belgrade, Serbia

P.S.E.11. The morphology of the osteoporotic rabbit bone after implantation of strontium doped biphasic ceramic
Mara Pilmane¹, Iize Salma², Girts Salms², Janis Locs³
¹Institute of Anatomy and Anthropology;
²Institute of Stomatology, Riga Stradins University;
³R.Cimdins Centre for Biomaterial Innovation and Development, Riga, Latvia

P.S.E.12. Spider silk coated with maghemite nanoparticles-synthesis and characterization
Svetlana Dmitrović¹, Vojislav Spasojević¹, Goran Branković², Georgios Constantinides³, Aleksandra Zarubica⁴, Branko Matović^1
1University of Belgrade, ''Vinča'' Institute of Nuclear Sciences, Belgrade, Serbia;
²University of Belgrade, Institute for Multidisciplinary Research, Belgrade, Serbia;
³Cyprus University of Technology, Lemesos, Cyprus;
⁴University of Niš, Faculty of Science and Mathematics, Department of Chemistry, Niš, Serbia

P.S.E.13. Cefazolin-loaded polycaprolactone fibers produced via blend and co-axial electrospinning
Anđela N. Radisavljevic¹, Dušica B. Stojanović², Srđan D. Perišić¹, Vesna J. Radojević², Mirjana D. Rajilić-Stojanović², Petar S. Uskoković^2
1University of Belgrade, Innovation Centre, Faculty of Technology and Metallurgy, Karnegijeva 4, 11120 Belgrade, Serbia;
²University of Belgrade, Faculty of Technology and Metallurgy, Karnegijeva 4, 11120 Belgrade, Serbia

P.S.E.14. In silico simulation of carvedilol absorption from oral films and nanofibers
Marija N. Radojević¹, Sandra V. Cvijić², Dušica B. Stojanović¹, Svetlana R. Ibrić², Petar S. Uskoković^1
1University of Belgrade - Faculty of Technology and Metallurgy, Department of Materials Science and Engineering, Karnegijeva 4, 11120 Belgrade, Serbia;
²University of Belgrade - Faculty of Pharmacy, Department of Pharmaceutical Technology and Cosmetology, Vojvode Stepe 450, 11221 Belgrade, Serbia

P.S.E.15. Stability of the magnetite particles dispersed in different surfactans using wet stirred media milling
Zdenka Bujňáková¹, Erika Dutková¹, Erika Tóthová¹, Jozef Kováč², Matej Baláž^1
1Institute of Geotechnics, Slovak Academy of Sciences, Watsonova 45, 04001 Košice, Slovakia;
²Institute of Experimental Physics, Slovak Academy of Sciences, Watsonova 47, 04001 Košice, Slovakia

P.S.E.16. Electrochemical characterization of Mg-Zn bulk materials prepared by powder metallurgy method
Pavel Doleža¹, Michaela Krystýnová², Jozef Minda¹, Stanislava Fintová¹, Matěj Březina¹, Josef Zapletal¹, Jaromír Wasserbauer^2
1Brno University of Technology, Faculty of Chemistry, Materials Research Centre, Purkynova 464/118, 612 00 Brno, Czech Republic;
²Brno University of Technology, Faculty of Mechanical Engineering, Institute of Materials Science and Engineering, Technicka 2896/2, 616 69 Brno, Czech Republic

P.S.E.17. Improvement of biocompatibility by formation of nanotubular oxide layer on the ultrafine-grained Ti-13Nb-13Zr alloy
Veljko R. Đokić¹, Dragana R. Barjaktarević¹, Đorđe N. Veljović¹, Ivana D. Dimić¹, Vesna V. Kojić², Marko P. Rakin^1
1University of Belgrade, Faculty of Technology and Metallurgy, 11120 Belgrade, Serbia;
²University of Novi Sad, Faculty of Medicine, Oncology Institute of Vojvodina, 21204 Sremska Kamenica, Serbia

P.S.E.18. The longterm chemical degradation of magnesium alloy AZ31 and AZ61 processed by method squeeze casting in SBF solution
Helena Doležalová Weissmannová¹, Ivana Ročňáková², Pavel Doležal^2,3
1Brno University of Technology, Faculty Chemistry, Institute of Chemistry and Technology of Environmental Protection, Brno, Czech Republic;
²Brno University of Technology, Faculty of Mechanical Engineering, Institute of Materials Science and Engineering, Dept. of Metal Materials, Brno, Czech Republic;
³Brno University of Technology, Faculty Chemistry Materials Research Centre (MRC), Brno, Czech Republic

P.S.E.19. Crystal structures of mixed chloride-azide zinc (II) and chloride-isocyanate cadmium (II) complexes with the condensation product of 2-quinolinecarboxaldehyde and girard’s reagent
Tanja Keškić¹, Milica Milenković¹, Božidar Čobeljić¹, Dušanka Radanović ², Katarina Anđelković^1
1Faculty of Chemistry, University of Belgrade, Studentski trg 12–16, 11000 Belgrade, Serbia;
²Institute of Chemistry, Technology and Metallurgy, University of Belgrade, Njegoševa 12, P.O. Box 815, 11000 Belgrade, Serbia

Chairperson: Feng-Huei Lin and Ching-Li Tseng

09⁰⁰-09³⁰
The preparation of injectable angiogenic bone cement for femoral head avascular necrosis
Feng-Huei Lin
Institute of Biomed Eng & Nanomed., National Health Research Institutes, Taiwan ; Institute of Biomed Eng., National Taiwan University, Taipei, Taiwan

09³⁰-10⁰⁰
Gelatin nanoparticles with anti-inflammatory/anti-angiogenesis agent loading for ocular disease treatment
Ching-Li Tseng
Graduate Institute of Biomedical Materials & Tissue Engineering, College of Biomedical Engineering; Taipei Medical University, Taipei, Taiwan, ROC

10⁰⁰-10¹⁵
High throughput generation of alginate-gelatin capsules for human osteoblask-like cells (MG63) long-term cultivation
Jia-En Yang¹, Yi-Chia Hsieh¹, Ching-Yun Chen², Kai-Fa Teo¹, Chun-Hsu Yao^3,4, Cherng-Jyh Ke^1,4
1China Medical University, College of Biopharmaceutical and Food Sciences, Department of Biological Science and Technology, Taichung, Taiwan;
²National Health Research Institutes, Institute of Biomedical Engineering and Nanomedicine, Miaoli, Taiwan;
³China Medical University Hospital, Biomaterial Translational Research Center, Taichung, Taiwan;
⁴China Medical University, College of Medicine, Department of Biomedical Imaging and Radiological Science, Taichung, Taiwan

10¹⁵-10³⁰
Using continuous bioreactor system to cultivate human bone-like tissues for bone tissue engineering
Ching-Yun Chen¹, Cherng-Jyh Ke^2,3, Jui-Sheng Sun^4,5, Feng-Huei Lin^1,6
1Institute of Biomedical Engineering and Nanomedicine (I-BEN), NHRI, Taiwan;
²Biomaterials Translational Research Center, China Medical University Hospital, Taiwan;
³Department of Biological Science and Technology, China Medical University, Taiwan;
⁴Department of Orthopedics, College of Medicine, NTU, Taiwan;
⁵Department of Orthopedic Surgery, NTUH, Taiwan ;
⁶Institute of Biomedical Engineering, College of Medicine and College of Engineering, NTU, Taiwan

10³⁰-10⁴⁵
Fabrication of multilayered gold/silica/gadolinium compound core-shell particles and their properties of X-ray imaging and MRI
Yuta Shindo¹, Tomoya Inose, Takahiro Oikawa¹, Masayuki Tokunaga², Yohsuke Kubota², Kohsuke Gonda³, Yoshio Kobayashi^1
1Ibaraki University, College of Engineering, Department of Materials Science and Engineering, Hitachi, Japan; ²Tohoku University, Graduate School of Medicine, Department of Gastroenterological Surgery, Sendai, Japan; ³Tohoku University, Graduate School of Medicine, Department of Medical Physics, Sendai, Japan

Break: 10⁴⁵-11¹⁵

Chairperson: Chien-Chung Chen and How Tseng

11⁴⁵-12¹⁵
The self-assembled, microtube array membranes (MTAM) and their applications for cancer translation
Chien-Chung Chen^1,2,3,7, Chee-Ho Chew¹, Wan-Ting Huang⁷, Kang-Yan Lee⁴, Po-Li Wei^5,6, Shih-Shin Tu^5,6
1Grad Inst. Biomedical Materials and Tissue Engineering, College of Biomedical Engineering, Taipei Medical University, Taipei, Taiwan;
²Ph.D Program in Biotechnology Research and Development, Taipei Medical University, Taipei, Taiwan;
³International Ph.D. Program for Cell Therapy and Regenerative Medicine, Taipei Medical University, Taipei, Taiwan;
⁴Division of Thoracic Medicine, Taipei Medical University Shuang Ho Hospital, Taipei Medical University, Taipei, Taiwan;
⁵Division of General Surgery, Taipei Medical University Hospital, Taipei Medical University, Taipei, Taiwan;
⁶TMU Research Center of Cancer Translational Medicine, Taipei Medical University Hospital, Taipei Medical University, Taipei, Taiwan;
⁷Research & Development Dept. MTAM Tech Inc. Taipei, Taiwan

12¹⁵-12³⁰
Cornea epithelium reconstruction by a new way to engineer cell sheet
How Tseng, Chein-Cheng TAI, Yuan-Yi WU, Kun-De Lin
Taipei Medical University,Medical School, Department of Biochemistry and Molecular Cell Biology, Taipei 11031, Taiwan

12³⁰-12³⁵
Addition of porogens improved the characteristics of biodegradable implants made of poly(ε-caprolactone)/calcium phosphate ceramic composites
Chang-Chin Wu^1,2, Kai-Chiang Yang^3,4, Feng-Huei Lin^5
1Department of Orthopedics, En Chu Kong Hospital, New Taipei City, Taiwan
²Department of Orthopedics, National Taiwan University Hospital, College of Medicine, National Taiwan University, Taipei, Taiwa
³Department of Organ Reconstruction, Institute for Frontier Medical Sciences, Kyoto University, Kyoto, Japan
⁴School of Dental Technology, College of Oral Medicine, Taipei Medical University, Taipei, Taiwan
⁵Ins. of Biomed. Eng., National Taiwan University, Taiwan

12³⁵-12⁴⁵
The application of hydroxyapatite as the Bletilla striata polysaccharide  carrier for sarcopenia treatment
Ya-Jyun Liang¹, Jia-Yu Hong¹, Chun-Han Hou², Feng-Huei Lin^1
1National Taiwan University, Institute of Biomedical Engineering, Taipei, Taiwan;
²National Taiwan University Hospital, Department of orthopedic surgery, Taipei, Taiwan

12⁴⁰-12⁴⁵
Hydroxyapatite/gelatin particles embedding stromal cell-derived factor-1 for bone tissue engineering
Chih Hsiang Fang¹, Yi Wen Lin¹, Jui Sheng Sun², Feng Huei Lin ^1,3
1Institute of Biomedical Engineering, College of Medicine and College of Engineering, National Taiwan University, Taipei 100, Taiwan
²Department of Orthopedic Surgery, National Taiwan University Hospital, Taiwan
³Division of Biomedical Engineering and Nanomedicine Research, National Health Research Institutes, Miaoli 350, Taiwan

12⁴⁵-12⁵⁰
A novel multilayer capsule as desensitizing agent for dental hypersensitivity
Kuo-Hui Chiu¹, Hsiu-Min Chen¹, Yuan-Yu Hsia¹, Ting-Ru Chung², Chih-Yu Shu³, Chia-Yung Lin⁴, Cherng-Jyh Ke^1,3
1China Medical University, College of Biopharmaceutical and Food Sciences, Department of Biological Science and Technology, Taichung, Taiwan
²China Medical University, College of Medicine, Department of Biomedical Imaging and Radiological Science, Taichung, Taiwan
³China Medical University Hospital, Biomaterial Translational Research Center, Taichung, Taiwan
⁴Taichung Hospital, Ministry of Health and Welfare, Department of Dentistry, Taichung, Taiwan

12⁵⁰-12⁵⁵
Electrospun silk fibroin composite scaffold for tendon repair
Yi-You Huang
Institute of Biomedical Engineering, National Taiwan University, Taipei, Taiwan.

12⁵⁵-13⁰⁰
BMP-2 and insulin delivered from plasma synthesis of carbon-based nanocarriers for bone regeneration
Yi Wen Lin¹, Chih Hsiang Fang¹, Jui Sheng Sun², Feng Huei Lin^1,3
1Institute of Biomedical Engineering, College of Medicine and College of Engineering, National Taiwan University, Taipei 100, Taiwan
²Department of Orthopedic Surgery, National Taiwan University Hospital, Taiwan
³Division of Biomedical Engineering and Nanomedicine Research, National Health Research Institutes, Miaoli 350, Taiwan

13⁰⁰-15⁰⁰ Break

Chairperson: Kwang Ho Kim and Yeon Sik Jung

15⁰⁰-15³⁰
Vertical alignment of BaTiO₃ nanoparticles for enhanced piezoelectric performance
Je Moon Yun¹, Kwang Ho Kim^1,2
1Global Frontier R&D Center for Hybrid Interface Materials (GFHIM), Republic of Korea;
²School of Materials Science and Engineering, Pusan National University, Republic of Korea

15³⁰-15⁴⁵
High performance photodetector using graphene barristor
Byoung Hun Lee
Center for emerging electronic devices and systems (CEEDS), Korea;
School of Materials Science and Engineering, Gwangju Institute of Science and Technology(GIST), Republic of Korea

15⁴⁵-16⁰⁰
High performance Al alloys development by simultaneous increasing strength and its trade-off properties
Seung Zeon Han¹, Kwang Ho Kim^2,3
1Computational materials department, Korea Institute of Materials Science (KIMS), Korea;
²Global Frontier R&D Center for Hybrid Interface Materials (GFHIM), Republic of Korea;
³School of Materials Science and Engineering, Pusan National University, School of Materials Science and Engineering, Korea

16⁰⁰-16¹⁵
Improving the mechanical properties and wettability of metals by control interfacial characteristics: study based on first-principles
Eun-Ae Choi
Computational materials department, Korea Institute of Materials Science (KIMS), Korea

16¹⁵-16³⁰
Hybrid materials imaging initiative: past, present and future
Seungbum Hong
Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), Korea

16³⁰-16⁴⁵
Circular double-patterning lithography using a block-copolymer template and atomic layer deposition
Se-Hun Kwon, Kyung Mox Cho
School of Materials Science and Engineering, Pusan National University, Korea

16⁴⁵-17¹⁵ Break

Chairperson: Kyung Ho Shin and Se-Hun Kwon

17¹⁵-17⁴⁵
Various nanoarchitectural hybrid materials for high-performance supercapacitors
Kyung Ho Shin¹, Kwang Ho Kim^2,3, Je Moon YUN^2
1Technology Business Division, Korea Institute of Science and Technology (KIST), Republic of Korea;
²Global Frontier R&D Center for Hybrid Interface Materials (GFHIM), Republic of Korea;
³School of Materials Science and Engineering, Pusan National University, Republic of Korea

17⁴⁵-18⁰⁰
High-performance hybrid energy storages enabling ultrafast charging and high energy density along with robust cycle life
Jeung Ku Kang
Department of KAIST, 373-1 Guseong Dong, Yuseong Gu, Daejeon (305-701), Republic of Korea

18⁰⁰-18¹⁵
Thermal management by electrochemical process: thermoelectric and radiative cooling materials
Jae-Hong Lim
Department of Electrochemistry, Korea Institute of Material Science, Korea

18¹⁵-18³⁰
Solution plasma synthesized carbon-supported hybrid catalysts for energy converting systems
Oi Lun (Helena) Li
School of Materials Science and Engineering, Pusan National University, Korea

18³⁰-18⁴⁵
3-dimensional hybrid nanostructures: novel fabrication strategies and applications
Yeon Sik Jung
Dept. of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), Korea

18⁴⁵-19⁰⁰
Virus: the next generation material
Jin-Woo Oh
Dept. of Nanoenergy Engineering, Pusan National University, Busan, Republic of Korea, 609-735